Hand Crimping Tool 220066-1 Instruction Sheet 408-2347 09 NDV S8 Rev B PROPER USE GUIDELINES Cumulative Trauma Disorders can result frown the prolonged use of manually powered hand tools. AMP hand teals are intended for occasional use and low volume applications. AMP offers a wide selection of powered application equipment for extended-USS, production operations. Back Side of Tell Ind enter Crimping Jaw CERTI-CRIMP™ Ratchet Anvil Crimping Jaw Crimping Chamber Markings Figure 1 1.
Hand Crimping Tool 220066-1 408-2347 Typical Socket Contact Shoulder Of Socket Contact Crimping Jaw Figure 2 4. Determine the appropriate crimping chamber referring to the customer drawing packaged with the contact. Center the ferrule In the crimping chamber on the anvil crimping jaw, with cabs extending from the FRONT side of tool. Make sure shoulder of contact Is against crimping jaw. See Figure 2. 5. Holding ferrule in place, squeeze tool handles together until the CERT-CRIMP ratchet releases. 6.
Hand Crimping Tool 220066-1 408-2347 B. Visual Inspection 1. Open tool handles. If they do not open quickly and fully, the handles are defective and must be replaced. 2. Inspect head assembly for worn, cracked, or broken jaws. If damage Is evident, return the tool 1o AMP for evaluation and repair. See Section 5, REPLACEMENT AND REPAIR. C. Aging the Crimping Chamber This Inspection requires the use of a plug Gage conforming to the dimensions provided in Figure 3.
Hand Crimping Tool 220066-1 408-2347 (Closed) L 304.8 J [12.00] REPLACEMENT PARTS TIER PART NUMBER DESCRIPTION QTY PER TOOL 1 21045-3 RING, Textual Crescent Retaining, .188 Dia Shaft 4 2 1-23619-6 PIN, Retaining, .187 Dia x 521 L 2 3 39364 SPRING, Hold Down 1 4 2-23620-9 PIN, Retiring, .250 Dix 838 L 1 5 21045-5 RING, External Crescent Staining, .252 Dia Shaft 2 6. REVISION SUMMARY Revisions 1o this document include: Per EC 0990-0760-99.