RoHS Ready AMP Metrimate Pin and Socket Connectors
AMP Metrimate Pin and Socket Connectors Product Facts • Recognized under the Component Program of Underwriters Laboratories Inc., ® File No. E28476 • Certified by Canadian Standards Association, File No. LR7189 ¨� • Tested to VDE requirements outlined in VDE Test Report No. 47511431-1029/A1l • Produced under a Quality Management System certified to ISO 9001 A copy of the certificate is available upon request. • Designed to meet IEC (440 V) requirements • True metric dimensions— contacts on 5 [.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Performance Characteristics Electrical Characteristics Performance Characteristics Voltage Rating: UL (600 VAC and VDC), CSA (600 VAC and VDC), VDE (380 VAC, 450 VDC), IEC (440 V) Dielectric Strength: 2000 Volts, RMS (at sea level) Current Rating: See contact current carrying capability data below. Insulation Resistance: 5000 Megohms (Min.) Termination Resistance: D ependent upon individual contact type.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Performance Characteristics (Continued) Performance Characteristics Current Rating Verification Can a contact rated at 10 amperes carry 10 amperes? The method can be summarized as follows: Maybe yes, but probably not. The reason lies in the test conditions used to rate the contact.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Performance Characteristics (Continued) To demonstrate the method of specifying current, consider the following application conditions, an ambient temperature of 65°C, a 50% loading of contacts in the housing, and 20 AWG [0.6 mm2] wire. • From Figure 1, the base current rating is 14 ampere with 18 AWG [0.8 mm2] wire. • Figure 2, the rating factor for 50% loading and 20 AWG [0.6 mm2] wire is 0.68.
AMP Metrimate Pin and Socket Connectors NOTE: All part numbers are RoHS Compliant Metrimate Connector Applications Drawer Connectors Standard Drawer Connectors, Rack and Panel Applications Merrimate Connector Applications Plug 4, 12, 19 and 25 Position Connectors; 8 and 15 Position Power Connectors (Pages 18, 19) Receptacle 4, 12, 19 and 25 Position Connectors; 8 and 15 Position Power Connectors (Pages 18, 19) Standard Drawer Connectors, Wire-To-Board Plug 12, 19 and 25 Position Pin Headers (Solder
AMP Metrimate Pin and Socket Connectors NOTE: All part numbers are RoHS Compliant Metrimate Connector Applications (Continued) Square Grid Connectors Merrimate Connector Applications Plug – Panel Mount (From either side) 4, 6, 9, 12, 18, 24 and 36 Position (Page 31) Receptacle 4, 6, 9, 12, 18, 24 and 36 Position (Page 31) A Strain Relief is available for the 6, 9, 12, 18, 24 and 36 Position Connectors.
AMP Metrimate Pin and Socket Connectors NOTE: All part numbers are RoHS Compliant Metrimate Connector Applications (Continued) In-Line Connectors Merrimate Connector Applications Plug – Free-Hanging 1, 3, 6, 10 and 16 Position (Page 39) PC Board Mount Socket Header, Straight-Thru 3, 6, 10 and 16 Position (Page 41) Receptacle 1, 3, 6, 10 and 16 Position (Page 39) PC Board Mount Socket Header, Right-Angle 3, 6, 10 and 16 Position (Page 41) Receptacle – Free-Hanging 3, 6, 10 and 16 Position (Page 39)
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Signal Contacts Type III+, Crimp, Snap-In .0625 +.0010 -.0020 Dia. [1.588 +0.025] -0.051 Spring, Stainless Steel Pin Body Spring, Stainless Steel .390 Min. [ 9.91] Ferrule, Brass, Nickel Flash Pin Socket Contact Size 16 - Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡ 30-26 0.05-0.09 0.05-0.15 Ins. Dia. Range .015-.030 0.38-0.76 .040-.060 1 1.02-1.52 .014-.030 1 0.36-0.76 26-24 0.12-0.2 .035-.055 1 0.
AMP Metrimate Pin and Socket Connectors NOTE: All part numbers are RoHS Compliant Signal Contacts (Continued) Type III+, Crimp, Snap-In Grounding Pin (make first - break last) Contact Size - 16 Pin Diameter - 1.57 [.062] Material and Finish Contacts Contact Body - Copper alloy, plated tin or gold Spring - Stainless steel Related Product Data Application Tooling Pages 56, 57 Technical Documents Page 58 Ins. Strip Form Grounding Pin Part No. Contact Dia.
AMP Metrimate Pin and Socket Connectors NOTE: All part numbers are RoHS Compliant Power Contacts - High Current Upgrade Type II and Type III+, Size 16 Standard Type II Socket Standard Type III+ Socket Contacts The features of the High Current Size 16 contact have been designed to fit into the existing AMP Multimate Connectors such as CPC (Circular Plastic Connector), CMC (Circular Metal Connector), G Series, M Series, Econoseal, Metrimate Square Grid and Drawer Connector housings.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Signal Contacts (Continued) Enhanced High Current Type III+, Crimp, Snap-In .0625 +.0010 -.0020 Dia. +0.025 [1.588 -0.051 ] Pin Body Spring, Stainless Steel Spring, Stainless Steel Contacts .390 Min. [ 9.91] Ferrule, Brass, Nickel Flash .113 Max. [ 2.87 ] Dia. Pin .530 ± .010 [13.46 ± 0.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Coaxial Contacts Subminiature, Crimp, Snap-In, Size 16 25.65 Ref. [1.010] Pin Contacts 16.51 Ref. [.650] Socket Pin 2.718 [.107 6.35 [.250] +.127 –.000 +.005 – .000 ] .076 A ±± .003 Dia. Dia. Ferrule 3.05 Dia. Part No. 225088-1—A [.120] Part No. 225088-3—A 3.12 Dia. [.123] Socket 2.845± .127 [.112 ± .005] Dia. 2.82± .076 Dia. [.111± .003] 6.35± .203 [.250± .008] Ferrule Part No. 1-332056-0 5.969 Max. [.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Coaxial Contacts (Continued) Subminiature, Crimp, Snap-In, Size 16 Loose Piece Contact No. Wire Size Contact Finish 2 AWG [mm ] Contacts (Continued) Selection Chart for Twisted Pair and Shielded Wire Ferrule Part No. Socket Pin 30 0.05 Gold/Nickel (Twisted Pair, Solid) Gold/Copper1 226537-3 51565-3 1-332057-0 69690-2 69656-2 28 0.08-0.
AMP Metrimate Pin and Socket Connectors NOTE: All part numbers are RoHS Compliant Power Contacts Standard, Size 8, 4/8 Indent Crimp 23.11 [.910] 5.23 Dia. [.206] Contacts Pin Pin 22.61 [.890] 5.23 Dia. [.206] Socket Socket Note: Standard Size 8, High Current Upgrade Size 8 and .125 POWERBAND contacts are not intermateable. Power Contacts, Standard, Size 8 (Test Current 50 Amperes)‡ Material Contact Body - Copper alloy Retention Clip - Phosphor bronze Finish Contact Body - 0.00127 [.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Power Contacts - High Current Upgrade (Continued) Metrimate Drawer Connector, Size 8 Receptacle Contacts The Louvertac bands have the versatility of being designed into contact dimensions used in existing Tyco Electronics connectors. Standard Size 8 Pin Metrimate High Current contacts have been designed to fit into the existing Drawer Connector housings.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Power Contacts (Continued) .125 POWERBAND Contacts Pin Diameter - .125 [3.175] Test Current - 50 Amperes‡ Material and Finish 5.23 Dia. [.206] Plating Code A. 0.00508 [.000200] min. silver on contact area, 0.00127 [.000050] min. on remainder, all over 0.00127 [.000050] min. nickel underplate B. 0.00076 [.000030] min. gold on contact area, gold flash on remainder, all over 0.00127 [.000050] min. nickel underplate 3.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Drawer Connectors Standard Drawer Connector Panel Mount Receptacle Housing Product Facts (Accepts Pin Contacts) Drawer Connectors • 4-, 12-, 19- and 25-position connectors for Size 16 contacts • 8-position connector for Size 8 power contacts, and a 15-position connector for 3 Size 8 power contacts and 12 Size 16 contacts • Provides “blind” mating with up to 2.3 [.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Drawer Connectors (Continued) Power Drawer Connector, Size 8* Receptacle Housing (Accepts Pin Contacts) * For use with Size 8 contacts found on page 15 Plug Housing (Accepts Socket Contacts) Panel Guide Pin Drawer Connectors Shoulder Screws (2) Provide Radial Floating Mount Rack (Drawer) Blindmate Power Connectors Housing Part No.* Plug Receptacle No. of Pos.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Drawer Hardware Mounting Screw Material Stainless steel Thread Size M4 x 0.7-6H/6g SAE 6/32 Part No. 208211-1 208211-4 5.1 [ .200] Dia. Note: These shoulder screws are used for mounting the plug housing and they provide float for positioning of misaligned connectors. Two are required for each plug. Mounting screws are to be ordered separately. Nuts are to be supplied by the customer. Drawer Connectors 11.8 [.465] 12.
AMP Metrimate Pin and Socket Connectors NOTE: All part numbers are RoHS Compliant Drawer Connector Specifications 4 Position Housings Plug (for Sockets) Receptacle (for Pins) Drawer Connectors 12 Position Housings Plug (for Sockets) Receptacle (for Pins) 21 Catalog 82045 Revised 06-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are equivalent U.S. Customary Units. Dimensions are shown for reference purposes only.
AMP Metrimate Pin and Socket Connectors NOTE: All part numbers are RoHS Compliant Drawer Connector Specifications (Continued) Drawer Connectors 19 Position Housings Plug (for Sockets) Receptacle (for Pins) 22 Catalog 82045 Revised 06-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are equivalent U.S. Customary Units. Dimensions are shown for reference purposes only. Specifications subject to change.
AMP Metrimate Pin and Socket Connectors NOTE: All part numbers are RoHS Compliant Drawer Connector Specifications (Continued) 25 Position Housings Plug (for Sockets) Drawer Connectors Receptacle (for Pins) 23 Catalog 82045 Revised 06-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are equivalent U.S. Customary Units. Dimensions are shown for reference purposes only. Specifications subject to change.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Drawer Connector Specifications (Continued) 25 Position Headers (mates with Plug Connector Part No. 211150-1) Receptacle with ACTION PIN Contacts 30.78 [1.212 ] 4.39 [ .173] Dia. 2 Holes 5.59 [.220] 4.40 [.173] Typ. 4.39 [ .173] Dia. 2 Holes 4.39 [.173 ] Typ. 5.08 [.200] Typ. 5.08 [.200] 2 Plcs. 2.54 [.100] Typ. 49.58 [1.952 ] 2.54 Typ. [.100] 62.53 [ 2.462 ] 5.08 [.200] Typ. Drawer Connectors 17.83 [.702 ] 0.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Drawer Connector Specifications (Continued) Recommended Panel Cutouts G M4x0.7-6H or 4.1 [.161] Dia. Thru Hole (2) G 22 [ .867] 17.65 [ .695] 2.3 x 45° [ .090] B B D A A F C D F C 3.2 [ .125] R. (Max.) 7.1 [ .280] 9.5 [ .375] E E Recommended Panel Cutout for Plugs (Socket Housings) No.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Drawer Connectors Power Drawer Connector Specifications 8 Position Housings 15 Position Housings (Size 8) (Accept 3 Size 8 Contacts and 12 Size 16 Contacts) Plug (for Sockets) Plug (for Sockets) Plug (for POWERBAND Sockets) 9.65 [.380] Dia. Mounting Hole (2) 44.70 [1.760] 26.31 [1.036] 12.70 [.500] 54.91 [2.162] Mating Face 11.30 [.445] 30.78 [1.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Low Profile Drawer Connectors 18 Position Hybrid Drawer Connector Right-Angle Header Part No. 213942-6 Product Facts • 13 signal (Type III+) • Two Size 8 Power—HOT PLUGGABLE! (10 amps AC) • Three .125 POWERBAND Contacts No. of Positions Plug (for sockets) 23 30 *18* 213766-1 213973-1 213940-1 Receptacle Header Housing 213768-4 — — 213974-1 213942-6 — Page No. 29 30 27, 28 *5 power, 13 signal Housing 2.54 [.100] Typ.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Low Profile Drawer Connectors (Continued) 18 Position Plug Housing (for Sockets) Part No. 213940-1 122.99 [4.842] 2.54 [.100] Typ. 90.42 [3.560] Material and Finish Housing - Black glass-filled thermoplastic, 94V-0 rated 11.05 [.435] 15.62 [.615] 5.08 [.200] 2 Plc. 32.00 [1.260] 6.35 [.250] Low Profile Drawer Connectors 7.24 [.285] 2 Plc. 77.72 [3.060] 8.00 [.315] Typ. 4.98 [.196] Typ. 14.99 [.590] 2.49 [.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Low Profile Drawer Connectors (Continued) 23 Position Plug Housing (for Sockets) Part No. 213766-1 3.18 Typ. [ .125] 15.24 [ .600] 11.18 [.440 ] 5.08 [ .200] Material and Finish 90.42 [ 3.560] Housing - Black glass-filled thermoplastic, 94V-0 rated 38.61 [1.520] 110.03 [ 4.332] 12.19 [.480 ] 122.99 [ 4.842] Low Profile Drawer Connectors 4.09 [.161 ] Dia. 21.34 [.840 ] 3.81 [.150 ] 102.41 [ 4.032] 110.03 [ 4.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Low Profile Drawer Connectors (Continued) 110.03 [4.332] 30 Position Plug Housing (for Sockets) Part No. 213973-1 9.65 Dia. [.380] 2 Plc. 90.42 [3.560] 5.08 Typ. [.200] 5.08 [.200] 15.62 [.615] 32.38 38.61 [1.275] [1.520] Typ. Typ. Low Profile Drawer Connectors 5.08 6.35 [.200] [.250] Typ. Typ. 122.99 [4.842] 2.54 [.100] R Typ. 9.65 Dia. [.380] Typ. 15.11 [1.520] 10.67 [.420] Typ. 102.41 [4.032] 21.34 [.840] 3.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Square Grid Connectors Free-Hanging and Panel Mount Connectors Plug Housing Socket Contact Material (Accepts Pin Contacts) Panel Latches Red thermoplastic, 94V-0 rated Panel Latches Pin Contact Polarization Feature Related Product Data Polarization Feature Locking Tab Serrated Release Serrated Release Locking Latch No. of Positions 4 6 9 12 18 24 36 Housing Part No.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Square Grid Connector Specifications 4 and 6 Position Housings 9, 12 and 18 Position Housings Plug (for Sockets) Plug (for Sockets) Receptacle (for Pins) 5 Typ. [.197] 17.85 [.703] Max. 17.85 [.703] Max. 5 Typ. [.197] 5 Typ. [.197] Receptacle (for Pins) 5 Typ. [.197] 5 Typ. [.197] 5 Typ. [.197] 23.8 [.937] Max. 23.8 [.937] Max. 5 Typ. [.197] 5 Typ. [.197] 9.2 Ref. [.362] 9.2 Ref. [.362] 27.15 [1.069] 27.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Square Grid Connector Specifications (Continued) 24 and 36 Position Housings Plug (for Sockets) Receptacle (for Pins) Recommended Panel Cutout (for Plug or Receptacle) 24 36 Connector Dimensions A B 40.45 1.592 55.45 2.183 32.85 1.293 47.85 1.885 Square Grid Connectors No. of Positions Panel Cutout Dimensions C 40.77 1.605 55.75 2.195 Note: Panel thickness 0.76-2.29 [.030-.
AMP Metrimate Pin and Socket Connectors NOTE: All part numbers are RoHS Compliant Square Grid Connectors PC Board Mount Headers Plug Material and Finish Housing - Red thermoplastic, 94V-0 rated Pin Contacts - Copper alloy, plated tin or gold duplex Socket Contacts - Phosphor bronze, plated tin or gold duplex (Shown to illustrate mating connector) Locking Tab Related Product Data Mateable Free-Hanging Connectors - Page 31 (Pin and Socket Headers do not mate.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Square Grid Pin Header Specifications 4 and 6 Position Headers 5 Typ. [ .197] C D Dia.* 4.6 [.181] Ref. 11.8 [.465] B A Max. 5 Typ. [ .197] 2.54 [.100] 18.16 [ .715] Max. 1 [ .039] Dia. Post Pin No. 1 B F 5 [.197] Typ. D Dia.* 2.5 [.098] Typ. 1.6 [.063] Dia. E Typ. Recommended Pc Layout Recommended PCBoard Board Layout 5 Typ. [ .197] 5 Typ. [ .197] C 4.6 [.181] Ref. D Dia.* 11.8 [.465] 2.54 [.100] 24.
AMP Metrimate Pin and Socket Connectors NOTE: All part numbers are RoHS Compliant Square Grid Pin Header Specifications (Continued) 24 and 36 Position Headers 5 [ .197] Typ. 5 [ .197] Typ. 3.3 [ .130] Dia. (for No. 4 Screw) B Pin No. 1 A Max. C 4.6 [ .181] Ref. Square Grid Connectors 11.8 [ .465] 2.54 [ .100] D Max. 1 [ .039] Dia. Post B E 2.5 [ .098] Typ. 3.3 [ .130] Dia. (for No. 4 Screw) 5 [ .197] Typ. 15 [ .591] Typ. 7.8 [ .307] Typ. 5 [ .197] Typ. 1.6 [ .063] Dia.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Square Grid Socket Header Specifications 4 and 6 Position Headers 5 [ .197]Typ. 5 [ .197] Typ. Socket No. 1 C Dia.* 14.35 [.565] 2.54 [.100] B A Max. 1 [.039] Dia. Post 4.6 [.181] Ref. 15.5 [.610] B 2.5 [.098] Typ. 5 [.197] Typ. E C Dia.* 1.6 [.063] Dia. 5 [.197] Typ. D Typ. 9, 12 and 18 Position Headers 5 [ .197]Typ. 5 [ .197] Typ. Square Grid Connectors Recommended PC Board Layout Socket No. 1 C Dia.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Square Grid Pin Header Specifications (Continued) 24 and 36 Position Headers 5 [ .197]Typ. 5 [ .197] Typ. Socket No. 1 3.3 [ .130] Dia. (for No. 4 Screw) B A Max. 14.35 [.565] Square Grid Connectors 2.54 [.100] 1 [.039] Dia. Post 25.55 [1.006] 4.6 [.181] Ref. B 5 [.197] Typ. C 3.3 [ .130] Dia. (for No. 4 Screw) 15 [.591] Typ. 7.8 [.307] Typ. 5 [.197] Typ. 1.6 [.063] Dia. 2.5 [.098] Typ.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors In-Line Connectors, 5 [.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors In-Line Connector Specifications, 5 [.197] Centerline Single Position Hermaphroditic Housings 6, 10 and 16 Position Housings Plug (for Sockets) 34.42 [1.355] Max. 5 Typ. [.197] 5.46 [.215] 15.1 [.594] Max. Cavity No. 1 27.5 [1.083] Positive Latch 9.6 [.378] 7.85 [.310] Max. 5.46 [.215] 34.67±0.51 [ 1.365±.020] A 1 2 3 4 Serrations in this area are optional.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors In-Line Connectors, 5 [.197] Centerline PC Board Mount Headers Plug Straight-Thru Pin Header Locking Latch (Shown to illustrate mating connector) Material and Finish Housing - Red thermoplastic, 94V-0 rated Pin Contacts - Copper alloy, plated tin or gold duplex Socket Contacts - Phosphor bronze, plated tin or gold duplex Right-Angle Pin Header Related Product Data Serrated Release Pin Header Part No. No.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors In-Line Pin Header Specifications, 5 [.197] Centerline Straight-Thru Right-Angle 3 Position Header 3 Position Header 5 [.197] Typ. 1 [.039] Dia. Post C Dia.* 4.72 [.186] Ref. Pin No. 1 C Dia.* B A Max. 4.88 [.192]Ref. 12.7 [.500] Max. 12.7 [.500] Max. In-Line Connectors C Dia.* D Recommended PC Board Layout 1.6 5 [.063] Dia. [.197] Typ. 10.8 [.425] Typ. 3.8 [.150] Ref. 17.5 [.689] B D C Dia.* 1.6 [.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors In-Line Socket Header, 5 [.197] Centerline Straight-Thru Right-Angle 3 Position Header 3 Position Header 5 [ .197] Typ. 1 [ .039] Dia. Post C Dia.* 4.72 [ .186] Ref. B A Max. C Dia.* Socket No. 1 B A Max. 4.6 [ .181] Ref. 11 [ .433] Max. 11 [ .433] Max. 2.54 [ .100] 19.5 [ .768] Socket No. 1 2.54 [ .100] B C Dia.* D Recommended PC Board Layout 5 [ .197] Typ. 10.8 [ .425] Typ. 5 [ .197] Typ.
AMP Metrimate Pin and Socket Connectors NOTE: All part numbers are RoHS Compliant In-Line Connectors, 5.08 [.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors In-Line Connector Specifications, 5.08 [.200] Centerline 6 Position Plug Housing 10 Position Plug Housing (for Sockets) (for Sockets) B A 5.08 [.200] Typ. 5.08 [.200] Typ. 9.14 [.360] 28.2 [1.110] C 9.14 [.360] 28.2 [1.110] 43.18 [1.700] 1 2 3 4 5 63.5 [2.500] 6 1 2 3 4 5 6 7 8 9 10 In-Line Connectors Raised Ring (Cavity No. 1 Only) Raised Ring (Cavity No.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors In-Line Right-Angle Pin Header Specifications, 5.08 [.200] Centerline 6 Position Header 7.75 [.305] Ref. 23.88 [.940] 3.23 [.127] Dia. 41.91 [1.650] 5.08 [.200] Typ. Pin No. 1 3.05 [.120] Ref. 13.97 [.550] 48.26 [1.900] 1.02 [.040] Dia. Pin 41.91 [1.650] 5.08 [.200] Typ. 25.4 [1.000] In-Line Connectors 8.26 [.325] Typ. 5.08 [.200] Typ. 3.23 [.127] Dia. 1.6 [.063] Dia.
AMP Metrimate Pin and Socket Connectors NOTE: All part numbers are RoHS Compliant In-Line Right-Angle Pin Header Specifications, 5.08 [.200] Centerline (Continued) 19 Position Header 17.91 Ref. [.705] 28.96 [1.140] 3.23 [.127] Dia. 72.39 [2.850] Pin No. 1 3.18 [.125] Typ. 6.35 [.250] Typ. 2.54 [.100] Typ. 19.05 [.750] 5.08 [.200] 78.74 [3.100] 3.05 [.120] Ref. 72.39 [2.850] 5.08 [.200] 1.02 [.040] Dia. Pin 57.15 [2.250] 10.16 [.400] Ref. 3.23 [.127] Dia. 6.35 [.250] Typ.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors In-Line Coaxial Socket Headers, Straight-Thru (PC Board Mount) 3 Circuit Assembly Part No. 208708-1 Material and Finish (Coaxial Contacts) Center Conductor - Copper Alloy plated 0.00127 [.000050] gold over 0.00076 [.000030] nickel Outer Shell - Copper alloy, plated 0.00038 [.000015] gold over 0.00127 [.000050] nickel Mounting Holes (for No. 2 Screws) 11.0 Max. [.433] 31.6 [1.244] 36.55 Max. [1.439] 5.21 Ref. [.205] 19.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors In-Line Coaxial Socket Headers, Straight-Thru (PC Board Mount) (Continued) 10 Position Circuit Assemblies Mounting Holes (See chart below.) 11.0 Max. [.433] Material and Finish 4.72 [.186] Ref. Coaxial Contacts Center Conductor - Copper Alloy plated 0.00127 [.000050] gold over 0.00076 [.000030] nickel Outer Shell - Copper alloy, plated 0.00038 [.000015] gold over 0.00127 [.000050] nickel B A Max.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors In-Line Coaxial Socket Headers, Straight-Thru (PC Board Mount) 3 Circuit Assembly Part No. 208222-2 Material and Finish Mounting Holes (for No. 2 Screws) 19.5 [.768] Coaxial Contacts Center Conductor - Copper Alloy plated 0.00127 [.000050] gold over 0.00076 [.000030] nickel Outer Shell - Copper alloy, plated 0.00038 [.000015] gold over 0.00127 [.000050] nickel 31.6 [1.244] 36.55 Max. [1.439] 2.54 [.100] 11.0 Max. [.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors In-Line Coaxial Socket Headers, Straight-Thru (PC Board Mount) (Continued) 6 Circuit Assembly Part No. 208212-3 Material and Finish 19.5 [.768] Mounting Holes (See chart below.) Coaxial Contacts Center Conductor - Copper alloy plated 0.00127 [.000050] gold over 0.00076 [.000030] nickel Outer Shell - Copper alloy, plated 0.00038 [.000015] gold over 0.00127 [.000050] nickel 46.6 [1.834] 51.59 Max. [2.031] 11.0 Max. [.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Rectangular Connectors 62 Position Rectangular Connector (Panel Mount) 5 Ref. [ .197 ] 5 Ref. [ .197] 5 Ref. [ .197 ] 5 [ .197 ] Ref. Material 40.18 [1.582] 40.18 [1.582] Black thermoplastic, 94V-0 rated 98.3 [ 3.870] 75 [ 2.952 ] 79.88 [ 3.145] 3.8 [.150 ] 39.34 [1.549] 31.06 [1.223 ] 11.3 [.445] 11.3 [.445] 75 [ 2.952 ] 3.8 [.150 ] 98.3 [ 3.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Rectangular Connectors (Continued) 62 Position PC Pin Headers (Mates with Plug Part No. 208334-4) 5 [ .197] Typ. 79.88 [ 3.145] 98.30 [ 3.870] 40.18 [1.582] Material Black thermoplastic, 94V-0 rated 3.56 [ .140] Dia. 39.34 [ 1.549 ] 11.30 [ .445] 5 [ .197]Typ. Related Product Data Mateable Plug - Page 52 5 98.30 [ .197] [ 3.870] Performance Characteristics Typ.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Commoning Connectors Product Facts • 36-circuit commoning system • Choice of bussing configurations: full bus and split bus of 8-8-8-8-4. Other arrangements are available, consult Tyco Electronics. • Compact design: 95.1 [3.744] x 33 [1.300] • Mounts onto machine frame and other panel areas 95.1 [3.744] 5.1 [.200] 84.9 [3.344] 6.35 [.250] 20.3 [.800] 4.3 Dia. [.169] Copper Bus Plates (See Note 1.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Power Distribution Connectors Product Facts • 36-circuit power distribution system • High current capability • Compact design: 95.1 [3.744] x 33 [1.300] • Accommodates one or two voltages (with split bus) 95.1 [3.744] 5.1 [.200] 84.9 [3.344] 6.35 [.250] Copper Bus 20.3 [.800] 4.3 Dia. [.169] Split Bus (See Note 1.) Bus Contact Connector Configuration Plating Part No.
AMP Metrimate Pin and Socket Connectors NOTE: All part numbers are RoHS Compliant Application Tooling Mechanical Hand Tools SDE (Standard Die for Interchangeable Die Envelope) Die Sets Sets SDE die sets provide costeffective flexibility, through many options for a common die-set outline. The SDE die sets can be adapted for use with CERTI-CRIMP hand tools, PRO-CRIMPER III hand tools, the SDE Terminator and the 626 Pneumatic Tool System. For more information, request Catalog 1654003.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Application Tooling (Continued) Pneumatic Hand Tool for Interchangeable Die Sets 6-26 Pneumatic Tool System Battery-Powered Crimp Tool Kits Effortless crimping for a broad range of terminals, either bench-mounted or hand-held for working in cramped quarters. • Lightweight tool eliminates physical force required by hand tools • Hand- or foot-switch operation • Termination wire range from 26-6 AWG [0.12-13.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Application Tooling (Continued) Crimp Quality Monitor (CQM) Part No. 1320420-2 The unique system provides 100% on-the-fly crimp inspection. It measures the crimp height of each termination, and evaluates the quality of each crimp. If a crimp is questionable, the monitor alerts the operator with both visual and audible alarms. It also provides ports for printing and networking.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Application Tooling (Continued) LEAD MAKERS APPLICATORS Komax gamma 333 PC Lead-Making Machine This fully-automatic, PCcontrolled leadmaker can be equipped with up to three processing stations enabling the crimping of both ends of the wire, double-crimp connections with three different contacts, singleended seal applications, tinning or ink-jet marking.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Application Tooling (Continued) Stripper-Crimper Applicators (coded SCA) 89827 Interchangeable applicators for crimping products in AMP-O-MATIC StripperCrimper Machines. Consist of separate ram and lower tooling assemblies. Similar dial-in settings for different wire sizes and insulation diameters as HDM applicators. Available with sensors for use with the Crimp Quality Monitor.
AMP Metrimate Pin and Socket Connectors NOTE: All part numbers are RoHS Compliant Technical Documents The following is a list of technical documents covering the application, performance and maintenance of Metrimate Connectors. Product Specifications describe technical performance characteristics and verification tests. They are intended for the Design, Component and Quality Engineer.
NOTE: All part numbers are RoHS Compliant AMP Metrimate Pin and Socket Connectors Part Number Index Note: This numerical index lists all cataloged part numbers by base number only. Complete part numbers (with prefixes and/or suffixes) are shown on the page indicated. Part No.
AMP Metrimate Pin and Socket Connectors NOTE: All part numbers are RoHS Compliant Engineering Notes Engineering Notes 63 Catalog 82045 Revised 06-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are equivalent U.S. Customary Units. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C.
Tyco Electronics Corporation Harrisburg, PA 82045 - Rev.
