Datasheet
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
OEG
General Purpose Relays
PCB Relays
n
10A contact rating
n
UL TV-5 rating
n
1 form A contact arrangement
n
Flux proof, wash tight version avaialable
Typical applications
Appliances, HVAC, cable TV, monitor, emergency lighting
Approvals
UL E58304, TUV R50137358, CQC03001002917
Technical data of approved types on request
Contact Data
Contact arrangement 1 Form A (NO)
Rated voltage 250VAC, 24VDC
Max. switching voltage 250VAC, 24VDC
Rated current 10A
Contact material AgSnOInO
Min. recommended contact load 100mA at 5VDC
Frequency of operation 800 ops./h
Operate/release time max. 15/8ms
Electrical endurance
10A 250VAC/24VDC resistive, -30°C to +60°C 100x10
3
ops.
TV-5 120VAC, 25x10
3
ops.
Mechanical endurance, DC coil 10x10
6
operations
Coil Data
Coil voltage range 3 to 48VDC
Operative range, IEC 61810 1
Coil insulation system according UL Class E
Coil Data (continued)
Coil versions, DC coil, D type
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
003 3 2.25 0.30 16.7 540
005 5 3.75 0.50 46.3 540
006 6 4.50 0.60 66.7 540
009 9 6.75 0.90 150 540
012 12 9.00 1.20 267 540
018 18 13.50 1.80 600 540
024 24 18.00 2.40 1067 540
048 48 36.00 4.80 4267 540
All figures are given for coil without pre-energization, at ambient temperature +23°C
Insulation Data
Initial dielectric strength
between open contacts 900V
rms
between contact and coil 4000V
rms
Clearance/creepage
between contact and coil >1.6/3.2mm
Miniature PCB Relay SDT
475
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03
Reference Data
Wiring Diagram (Bottom View)Outline Dimensions
Operating Voltage Operate Time Life Expectancy
PC Board Layout (Bottom View)
Ordering Information
Typical Part Number B SDT -SS -1 12 D M ,000
1. Basic Series:
SDT = Miniature Power PC board relay.
2. Enclosure:
SS = Vented (Flux-tight) * plastic cover.
SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input:
D = Standard
6. Contact Arrangement:
M = 1 Form A, SPST-NO
7. Suffix:
,000 = Standard model Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
12
10
8
6
4
2
0.2
0.4
0.6 0.8 1.0 1.2 1.4
Coil Power (W)
Time (msec)
Release Time
Operate Time
-40 -20
Ambient Temp. (°C)
20
% of Supplying Voltage to Coil
0
20 40 60 80 100
40
60
80
100
120
140
160
0
180
120
140
Operating
Votage Range
Pick-Up Voltage
Cool Coil
Hot Coil Applied
Maximum
Allowable
Coil Voltage
5A
1A
1A
5A
100
1
Contact Current (A)
Operation (x 10
4
)
10
1
2
3
4
5
6
0
250VAC, 30VDC
Resistive
7
Note: This data is based on the max. allowable
temperature for E type insulation coil (115°C).
.409 ± .02
(10.4 ± .5)
.031
(.8)
.96 ± .02
(24.4 ± .5)
.018
(.45)
.984 ± .02
(25.0 ± .5)
.012
(.3)
.100
(2.55)
.018
(.4)
.031
(.8)
.646 ± .012
(16.4 ± .3)
.295 ± .010
(7.5 ± .25)
.38 ± .008
(3.5 ± .2)
.646 – .004
(16.4 – .1)
.295 – .004
(7.5 – .1)
4 — .05 DIA
(1.3)
.38 – .004
(3.5 – .1)
None at present.
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
Coil operative rangeOperate time
475
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03
Reference Data
Wiring Diagram (Bottom View)Outline Dimensions
Operating Voltage Operate Time Life Expectancy
PC Board Layout (Bottom View)
Ordering Information
Typical Part Number B SDT -SS -1 12 D M ,000
1. Basic Series:
SDT = Miniature Power PC board relay.
2. Enclosure:
SS = Vented (Flux-tight) * plastic cover.
SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input:
D = Standard
6. Contact Arrangement:
M = 1 Form A, SPST-NO
7. Suffix:
,000 = Standard model Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
12
10
8
6
4
2
0.2
0.4
0.6 0.8 1.0 1.2 1.4
Coil Power (W)
Time (msec)
Release Time
Operate Time
-40 -20
Ambient Temp. (°C)
20
% of Supplying Voltage to Coil
0
20 40 60 80 100
40
60
80
100
120
140
160
0
180
120
140
Operating
Votage Range
Pick-Up Voltage
Cool Coil
Hot Coil Applied
Maximum
Allowable
Coil Voltage
5A
1A
1A
5A
100
1
Contact Current (A)
Operation (x 10
4
)
10
1
2
3
4
5
6
0
250VAC, 30VDC
Resistive
7
Note: This data is based on the max. allowable
temperature for E type insulation coil (115°C).
.409 ± .02
(10.4 ± .5)
.031
(.8)
.96 ± .02
(24.4 ± .5)
.018
(.45)
.984 ± .02
(25.0 ± .5)
.012
(.3)
.100
(2.55)
.018
(.4)
.031
(.8)
.646 ± .012
(16.4 ± .3)
.295 ± .010
(7.5 ± .25)
.38 ± .008
(3.5 ± .2)
.646 – .004
(16.4 – .1)
.295 – .004
(7.5 – .1)
4 — .05 DIA
(1.3)
.38 – .004
(3.5 – .1)
None at present.
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
475
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03
Reference Data
Wiring Diagram (Bottom View)Outline Dimensions
Operating Voltage Operate Time Life Expectancy
PC Board Layout (Bottom View)
Ordering Information
Typical Part Number B SDT -SS -1 12 D M ,000
1. Basic Series:
SDT = Miniature Power PC board relay.
2. Enclosure:
SS = Vented (Flux-tight) * plastic cover.
SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input:
D = Standard
6. Contact Arrangement:
M = 1 Form A, SPST-NO
7. Suffix:
,000 = Standard model Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
12
10
8
6
4
2
0.2
0.4
0.6 0.8 1.0 1.2 1.4
Coil Power (W)
Time (msec)
Release Time
Operate Time
-40 -20
Ambient Temp. (°C)
20
% of Supplying Voltage to Coil
0
20 40 60 80 100
40
60
80
100
120
140
160
0
180
120
140
Operating
Votage Range
Pick-Up Voltage
Cool Coil
Hot Coil Applied
Maximum
Allowable
Coil Voltage
5A
1A
1A
5A
100
1
Contact Current (A)
Operation (x 10
4
)
10
1
2
3
4
5
6
0
250VAC, 30VDC
Resistive
7
Note: This data is based on the max. allowable
temperature for E type insulation coil (115°C).
.409 ± .02
(10.4 ± .5)
.031
(.8)
.96 ± .02
(24.4 ± .5)
.018
(.45)
.984 ± .02
(25.0 ± .5)
.012
(.3)
.100
(2.55)
.018
(.4)
.031
(.8)
.646 ± .012
(16.4 ± .3)
.295 ± .010
(7.5 ± .25)
.38 ± .008
(3.5 ± .2)
.646 – .004
(16.4 – .1)
.295 – .004
(7.5 – .1)
4 — .05 DIA
(1.3)
.38 – .004
(3.5 – .1)
None at present.
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
Electrical endurance
Z
t