METRIC Catalogue 1654742 Rast 5 Dimensions are millimetres over inches Revised 5-04 Table of Contents AMP multifitting Mark II Introduction ……………………………………………………………………………2002 Direct and Indirect Connection 5.
AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Dimensions are millimetres over inches Revised 5-04 Introduction Product Features ■ Direct Mating Connectors for PC Boards, 2–8 Positions, up to 6 A Current Carrying Capacity ■ Indirect Mating Connectors, 1–8 Positions, up to 16 A Current Carrying Capacity ■ Variable Keying ■ Double Wire Termination possible Tyco Electronics’ newly designed AMP multifitting Mark II Connector System was developed according to the la
AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Dimensions are millimetres over inches Revised 5-04 Direct and Indirect Mating Connection, 5.0 mm Centerline Direct Mating Connection, 5.0 mm Centerline 4 3 1 Double Wire Exit 2 Wire Exit 90° 2 3 Wire Exit 180° Rast 5 4 Cover 5 Exterior Locking Latch 6 Keying 5 1 7 Polarisation 2 7 Indirect Mating Connection, 5.
AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Derating Curves Direct Mating Connector System I /A 7 6 Connector: 8 positions Current 5 Material: Brass, tin plated 4 3 2 Wire: 0.5 mm2 1 PC Board: FR4, 2 x 0.
AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Keying Plan and Cable Exit Keying Plan from Mating Direction, Fully-Keyed Version 3 c 3 Polarisation Rib –5– –4– –3– 2 Keying Rib 2 d 1 Locking Latch –2– a – 1 –b 4 Rast 5 4 Cavity Number 1 2 –5– –4– –3– c d This final keying version will be produced on the Application Tooling Equipment.
AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Dimensions are millimetres over inches Revised 5-04 Technical Features Technical Data Centerline: 5.0 mm Housing Material: Polyamide, PA 6.6 and PA 6 Standard Colour: Natural Current Voltage: 250 V ~ Air and Creepage Distance: >3.2 mm Flammability Rating: UL 94 V-2 Approvals: VDE, UL Direct Mating Connectors Indirect Mating Connectors No.
AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Direct Mating Connector System Technical Data Wire Size Range: 0.35–1.0 mm2 Current Carrying Capacity (max.): 6A Part Numbers with Exterior Locking PA 6.6 PA 6 * 1-1241172-2 1-1534075-2 Package Quantity Part Numbers with Interior Locking PA 6.
AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Direct Mating Connector System (continued) Technical Data Wire Size Range: 0.35–1.0 mm2 Current Carrying Capacity (max.
AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Indirect Mating Connector System Technical Data Wire Size Range: 0.35–1.0 mm2 Part Numbers with Exterior Locking –3– –5– –5– –4– –4– –4– –4– –3– –3– –3– –3– –2– –2– –2– 1-1241170-5 –2– 1-1241170-4 –1– 1-1241170-4 –1– –1– 1-1241170-3 –1– 1-1241170-3 –3– –2– 1-1241170-2 –2– 1-1534072-1 –2– 1-1241170-1 –1– PA 6 * –1– PA 6.
AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Indirect Mating Connector System (continued) Technical Data Wire Size Range: 0.35–1.0 mm2 Current Carrying Capacity (max.
AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Indirect Mating Connector System (continued) Technical Data Wire Size Range: 1.0–1.5 mm2 Current Carrying Capacity (max.): 16 A Part Numbers with Exterior Locking RAST 5 Version PA 6 * 1-1241171-1 1-1534073-1 1-1241171-2 PA 6.
AMP multifitting Mark II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches PC Board Frame Latching Hole Keying PC Board Frame PC Board B A No. of Positions 2 4 5 Dimensions (mm) A B 5 10.1 15 20 20.1 25.1 6 25 30.1 7 30 35.1 8 35 40.1 122 55 60.1 Keying Latching Polarisation Additional Board Lock Part Number PC Board Frame, PA 6.
AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Dimensions are millimetres over inches Revised 5-04 Introduction AMP MONO-SHAPE Connectors in In-Line Mating Technology AMP MONO-SHAPE connectors represent a valid solution to the ever-increasing requirements for production and application flexibility. They are high productivity, great flexibility, quality, minimum applied cost. 2 Rast 5 AMP MONO-SHAPE productline includes a full range of 5.
AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Dimensions are millimetres over inches Revised 5-04 AMP MONO-SHAPE Connector Versions Same Shape Different Applications With the same outside shape four connector versions are available, which are to handle with the same application tooling. TAB Connectors 2–12 position 5.0 mm pitch connectors with insulation displacement contacts mateable with components according to RAST 5 and with tinned copper alloy tab 6.3 x 0.
AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches TAB Connector AMP MONO-SHAPE TAB Connector 1 6 1 Cover closed after Wire Insertion. Wire Direction 90°. 180° when locked in Cover Recess 2 2 Cavity Numbers Rast 5 2 3 Polarisation similar to the Keying (Located on the Back Side) 3 4 Keying 5 Interior Locking Latch 5 6 Colour Marking 4 Technical Features Centerline: 5.
AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Keying Plan Keying Plan from Mating Direction, 4 5 AMP MONO-SHAPE TAB Connector 1 –7– –6– –4– c c 5 Cavity Number –3– 4 Polarisation Rib –2– 3 Keying Rib d –1– a 2 Slanted Keying Rib – 5 –b 1 Locking Latch 2 3 2 Position RAST 5 Variations (Variable Keying)* Suitable for RAST 5 Version Colour Marking Part Numbers RAST 5 Version Packaging Unit On Ree
AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches AMP MONO-SHAPE TAB Connector 3 Position RAST 5 Variations (Variable Keying)* –3– Loose Piece On Reel 1-282003-1 2-282003-1 3-282003-1 1-284339-1 2-284339-1 — 1-282003-2 2-282003-2 3-282003-2 1-284339-2 2-284339-2 — 1-282003-3 2-282003-3 — 1-284339-3 2-284339-3 — 282233-2 282233-2 — 1-282003-4 2-282003-4 — 1-284339-4 2-284339-4 — 1-282003-5 2-2
AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches AMP MONO-SHAPE TAB Connector 4 Position RAST 5 Variations (Variable Keying)* Suitable for RAST 5 Version Colour Marking Part Numbers On Reel On Reel Loose Piece On Reel 1-282004-1 2-282004-1 3-282004-1 2.120 2.000 18.750 1-282004-2 2-282004-2 3-282004-2 2.120 2.000 18.750 1-282004-3 2-282004-3 — 2.120 2.
AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches AMP MONO-SHAPE TAB Connector 6 Position RAST 5 Variations (Variable Keying)* Suitable for RAST 5 Version Colour Marking Part Numbers RAST 5 Version Packaging Unit Loose Piece On Reel On Reel Loose Piece On Reel Violet 1-282006-1 2-282006-2 3-282006-2 2.080 1.200 13.500 — 1-282006-3 2-282006-3 3-282006-3 2.080 1.200 13.500 Red 1-284745-1 — — 2.
AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches AMP MONO-SHAPE TAB Connector 8 Position RAST 5 Variations (Variable Keying)* Suitable for RAST 5 Version Colour Marking Packaging Unit On Tray Loose Piece On Reel On Reel Loose Piece On Reel 1.560 900 — 1.
AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches AMP MONO-SHAPE Single Way Connector Single Way Connector 1 2 1 All Single Way Connectors are supplied in “stick-form” by 6 single ways each. They will be cut from the Application Tooling Machines 2 Rast 5 2 Cover closed after Wire Insertion. Wire Direction 90°.
AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Keying Plan from Mating Direction Keying Plan 2 a 1 Keying Rib c 3 Cavity Number 3 d –1– 2 Polarisation Rib 1 AMP MONO-SHAPE Single Way Connector 1 Position (Variable Keying)* Suitable for RAST 5 Version Colour Marking Part Numbers RAST 5 Version Packaging Unit On Reel On Tray On Reel — 1-282086-1 1.024 10.500 — 1-282086-2 1.024 — — 1-282086-3 1.
AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches AMP MONO-SHAPE PCB (Printed Circuit Board) Connector PCB Connector 1 1 Cover closed after Wire Insertion. Wire Direction 90°. 180° when locked in Cover Recess 2 2 Cavity Numbers Rast 5 2 3 Keying Slot in PC Board 5 4 Locking Hole in PC Board 5 Colour Marking 4 3 Technical Features Centerline: 5.0 mm Configurations: 2-12 positions Housing Material: Plastic PA 6.
AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches AMP MONO-SHAPE PCB (Printed Circuit Board) Connector PCB Connector Wire Exit 1 1 2 5,0 1 PC Board 2 First Circuit Path 3 3 MONO-SHAPE Connector 4 Wire 23,0 15,0 4 14,0 Notes Concerning the PC Board Layout 4 1 1 First circuit path 2 2 Slot for keying rib in front of first cavity (according to the connector 4.0 mm or 7.
AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches AMP MONO-SHAPE PCB (Printed Circuit Board) Connector Centerline 5.0 mm No. of Positions Colour Marking Part Numbers PC Board Cut-Out Packaging Unit Loose Piece On Reel On Reel Loose Piece On Reel 1-282042-1 2-282042-1 — 5.980 3.500 — 1-282042-2 2-282042-2 3-282042-2 5.980 3.500 28.500 1-282042-3 2-282042-3 3-282042-3 5.980 3.500 28.
AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches AMP MONO-SHAPE PCB (Printed Circuit Board) Connector Centerline 5.0 mm (continued) No. of Positions Colour Marking Part Numbers PC Board Cut-Out Packaging Unit On Tray Loose Piece On Reel On Reel Loose Piece On Reel 1-282045-1 2-282045-1 3-282045-1 2.600 1.500 18.750 1-282045-2 2-282045-2 3-282045-2 2.600 1.500 18.
AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches AMP MONO-SHAPE PCB (Printed Circuit Board) Connector Centerline 5.0 mm (continued) No. of Positions Colour Marking Part Numbers PC Board Cut-Out Packaging Unit Loose Piece On Reel On Reel Loose Piece On Reel 1-284401-1 — — 1.300 — — 284575-1 — — 1.300 — — 1-282051-1 2-282051-1 3-282051-1 1.040 700 10.500 1-282052-1 2-282052-1 3-282052-1 1.
AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Dimensions are millimetres over inches Revised 5-04 AMP MONO-SHAPE Satellite Connector Satellite Connector 1 1 Cover closed after Wire Insertion. Wire Direction 90°. 180° when locked in Cover Recess 2 2 Bridge between Contacts to have Short Circuit 3 Cavity Numbers 4 For Satellite version, the cavity 1 only accept TAB contact, other cavities are clogged 3 4 Technical Features Centerline: 5.
AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Keying Plan from Mating Direction 4 Cavity Number – 5 –b 2 c –4– c 3 Polarisation Rib –3– 2 Keying Rib –2– a –1– 1 Locking Latch –7– 3 4 –6– Keying Plan Rast 5 2 1 AMP MONO-SHAPE - 3 Position Satellite Connector (Variable Keying)* –3– Packaging Unit On Tray Loose Piece On Reel On Reel Loose Piece On Reel 1-282099-1 — — 4.
AMP MONO-SHAPE Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Keying Plan from Mating Direction AMP MONO-SHAPE Bridge Connector - 3 Position RAST 5 Variation (Variable Keying)* Bridge between Contacts. Cavity Numbers 1-2-3 to have Short Circuit –3– Packaging Unit On Tray Loose Piece On Reel On Reel Loose Piece On Reel — 284289-1 — — 2.
AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Dimensions are millimetres over inches Revised 5-04 Introduction AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology MONO-SHAPE Mark II Connector System was developed according to the newest level of knowledge and standard.
AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Dimensions are millimetres over inches Revised 5-04 Technical Data Centerline: 5.0mm Current Voltage: 250 V~ Housing Material: Polyamide, PA 6.6 and PA 6 Air and Creepage Distance: >3.2mm Approvals: VDE, UL CSA applied Flammability Rating: According UL 94 V-2 Standard Colour: Natural TAB Connectors 1-10 position 5.
AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Keying Plan and Cable Exit Keying Plan from Mating Direction, Fully Keyed Version 3 4 1 Locking Latch 2 2 Keying Rib 3 Polarisation Rib Rast 5 4 Cavity Number 5 Motor Mount Special Keying 1 2 5 Example of Keyed Version: 05-C This final keying version will be produced on the Application Tooling Equipment Cable Exit 3 1 Double Wire Exit 9 4 2 Wire Exit 9
AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches TAB Connector System AMP MONO-SHAPE MARK II TAB Connector System No. of Positions: 1 to 10 positions Insulation Diameter: 3.0mm max. Product Specification: 108-20213 Contact Material: CuNi2Si Insulation Resistance: >10 MΩ Application Specification: 114-20104 Contact Finish: Tin Plated Wire Size Range: 0.35-1.
AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches TAB Connector System (continued) AMP MONO-SHAPE MARK II TAB Connector System 2 Colour Marking as Shipped Rast 5 Part Numbers No.
AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches TAB-BRIDGE Connector System - Short Circuit AMP MONO-SHAPE MARK II TAB-BRIDGE Connector System - Short Circuit No.
AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches PCB Connector System No. of Positions: 2 to 12 positions Insulation Diameter: 2.8mm max. Product Specification: 108-20214 Contact Material: Brass Insulation Resistance: >10 MΩ Application Specification: 114-20104 Contact Finish: Tin Plated Wire Size Range: 0.35-0.75mm2 Current Rating: 6 A max.
AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches PCB Connector System (continued) AMP MONO-SHAPE MARK II PCB Connector System Part Numbers No.
AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches PCB Connector System (continued) AMP MONO-SHAPE MARK II PCB Connector System Part Numbers No.
AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches PCB Connector System (continued) AMP MONO-SHAPE MARK II PCB Connector System Part Numbers No.
AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches PCB Connector System (continued) AMP MONO-SHAPE MARK II PCB Connector System Part Numbers No.
AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Application Tooling Entry Level Semi-Automatic IDC Bench Machines SIM 500P Part No. 528376-2 In the Entry Level concept, the application process is shared by two different semi-automatic machines. The SIM 500P prepares the AMP multifitting Mark II bandoliered IDC connectors. The machine removes the connector from the chain and cuts the keying ribs.
AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Application Tooling (continued) IDC Workstation – SIM 50 This semi-automatic machine was designed for the sequential processing of AMP multifitting Mark II IDC connector system and its variations such as direct and indirect mating connector with interior or exterior locking.
AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Application Tooling (continued) Flexible Harness Maker – FHM The FHM is a fully-automatic machine featuring modular set up. It is built to manufacture harnesses by processing both IDC connectors and crimp terminals.
AMP MONO-SHAPE MARK II Connectors in In-Line Mating Technology METRIC Catalogue 1654742 Revised 5-04 Dimensions are millimetres over inches Application Tooling (continued) IDC Harness Maker – IHM Mark III The new IHM Mark III is a very high performance, fullyautomatic machine designed to manufacture parallel jumper harnesses using IDC technology. 2 Rast 5 The simultaneous feeding of up to 21 wires guarantees high productivity and flexibility and a choice of 2.5 mm or 5.0 mm pitch IDC systems.
AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Introduction AMP Standard Timer Connectors in In-Line Mating Technology AMP Standard Timer connectors according to RAST 5.0 mm standard have been developed to connect RAST 5 components (like motors, leach pumps, water level regulators, relays and push-button switches) in the Household Appliances Industry.
AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Interior and Exterior Locking Interior Locking Mating Direction Connection to the Components according RAST 5 Standard 1 1 Connected Timer Contact 2 Standard Timer Housing with Interior Locking 2 6 Rast 5 3 Keying 4 Polarisation 5 Locking Latch 3 6 Cover (Secondary Locking) 4 7 RAST 5 Tab Array 5 2 7 Exterior Locking Connection to the Components according RAST 5 Standard Mating Direction 1 1 Connect
AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Keying Plan and Housings 6 4 Slanted Keying Rib –7– – 5 –b –4– c c 3 Keying Rib between Cavity –3– 2 Keying Rib d –1– 1 Locking Latch –2– a 5 –6– Keying Plan from Mating Direction 5 Polarisation Rib 6 Cavity Number 1 2 4 3 AMP Standard Timer Housings 2 Position Rast 5 Variations Keying Version Colour Part Numbers 2-928344-2 0-928247-2 2.500 / 3.000 3-964951-2 8-928247-2 2.500 / 2.
AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 2 Position Rast 5 Variations (continued) Keying Version Colour Part Numbers RAST 5 Version 4-928247-2 2.500 – 2 –b 0-928343-2 — 3.000 –2– — 3-964983-2 2.500 –2– a –2– — 0-964951-2 2-928247-2 2.500 / 2.500 — 7-928247-2 2.500 4-928344-2 — 2.
AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 3 Position Rast 5 Variations Keying Version Colour Part Numbers RAST 5 Version –3– — 3.000 – 3 –b — 0-964983-3 2.500 — 3-928247-3 2.500 2-928247-3 2.500 4-928247-3 2.500 2-964983-3 2.
AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 3 Position Special Variations Colour Part Numbers Version with Exterior Locking –3– –2– –3– –2– –1– Grey 02-928343-3 — 3.000 –3– – 2 –b –1– Yellow 3.000 3-928343-3 — 3.000 – 3 –b –2– –1– Grey — — 0-928247-3 2.000 — 2.500 5-928247-3 2.
AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 4 Position Rast 5 Variations Keying Version Colour Part Numbers RAST 5 Version –4– 5-928247-4 1.250 0-928247-4 2.000 / 1.250 — 2-928247-4 1.250 — 3-928247-4 1.250 d 2.000 / 1.
AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 5 Position Rast 5 Variations Keying Version Colour Part Numbers RAST 5 Version –5– 2-928247-5 1.000 –5– –4– — — 3-928247-5 1.
AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 6 Position Rast 5 Variations Keying Version Colour Part Numbers RAST 5 Version 964983-6 2.500 928247-6 1.000 2-928247-6 1.000 3-928247-6 1.
AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 6 Position Special Variations Colour Part Numbers Version –1– –2– –3– –4– –5– – 6 –b – 1 –b –2– –3– –4– –5– –6– –1– –2– –3– –4– –5– –6– 928151-6 – 1 –b –2– –4– –5– –6– — – 1 –b –2– –4– –5– –6– — –1– –2– –4– –5– –6– — – 1 –b –2– –3– –4– –5– –6– — –3– –4– –5– –6– 2-928344-6 – 5 –b –6– 3-928344-6 Beige Yellow Brown Natural N
AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 7 Position Rast 5 Variations Keying Version Colour Part Numbers RAST 5 Version –6– –6– with Exterior Locking 928151-7 — 1.
AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 8 Position Rast 5 Variations Keying Version Colour Part Numbers RAST 5 Version –8– –7– –6– — 928247-8 800 2 d c –5– –4– –3– –2– with Exterior Locking Rast 5 Blue d c 08-D –1– with Interior Locking Packaging Unit AMP Standard Timer Housings 8 Position Special Variations Colour Part Numbers Version –5– –6– –7– –4– –5– –6– –7– –4– –5– –6– –7– –4–
AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 9 Position Rast 5 Variations Keying Version Colour Part Numbers RAST 5 Version –9– –8– –7– with Exterior Locking — 2-928247-9 600 d –6– – 5 –b –4– –3– d Blue –2– 09-D –1– with Interior Locking Packaging Unit AMP Standard Timer Housings 9 Position Special Variations Colour Part Numbers Version –6– –7– –8– –9– –6– –7– –8– – 9 –b –6– –7– –8– –9– –
AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Housings AMP Standard Timer Housings 10 Position Special Variations Keying Version Colour Part Numbers RAST 5 Version –6– –7– –8– –9– –6– –7– –8– –9– – 10 – –5– –5– — 1-928247-0 1.
AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Standard Timer Connector and Contacts Technical Data Derating Curve I/A 20 Material: Brass, Tin Plated 18 5 16 Mating Part: 6.3 Tab 6 Standard Power Timer Current Rating 14 Wire: FLK 0.5/0.75 and 1.5mm2 Current Carrying Capacity to 6A: 1 = Wire 0.50mm2, 11pos. housing 2 = Wire 0.75mm2, 11pos. housing 3 = Wire 0.50mm2, 2pos. housing 4 = Wire 0.75mm2, 2pos.
AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Engineering Notes 2 Rast 5 2061 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.
AMP Standard Timer Connectors in In-Line Mating Technology Catalogue 1654742 Revised 5-04 Engineering Notes 2062 Products for Industrial & Commercial Applications Dimensions are shown for reference purposes only. Conversion Rate: 25.4mm = 1 inch Dimensions are in inches and millimetres unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. www.tycoelectronics.