Datasheet

1
09-2018, Rev. 0918
www.te.com
© 2012 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
SCHRACK
General Purpose
Low Power PCB Relays
Miniature PCB Relay ORWH
n
Compact relay with 1 form A and 1 form C contact arrangement
n
10A switching capacity
n
Flux proof or sealed type available
n
6kV dielectric strength type available
Typical applications
Appliances, HVAC, emergency lighting.
Approvals
UL E82292, TUV R50138967
Technical data of approved types on request.
Contact Data
Contact arrangement 1 form A, 1 NO
1 form C, 1 CO
Rated voltage 28VDC, 277VAC
Max. switching voltage 28VDC, 277VAC
Rated current 10A
Contact material AgZnO, AgCdO, AgNi
Min. recommended contact load 100mA, 5VDC
Frequency of operation 600 ops./h
Operate/release time max. 10ms/5ms
Electrical endurance
AgZnO: form A, 10A, 250VAC, res., +85°C, Class B or F only 100x10
3
ops.
AgCdO: form A, 10A, 250VAC, res., +85°C, Class B or F only 50x10
3
ops.
AgNi: form A, 10A, 250VAC, res., +85°C, Class B or F only 50x10
3
ops.
Contact ratings, form A/form B 10A/6A 250VAC resistive
10A/6A 28VDC resistive
Mechanical endurance, DC coil 10x10
6
operations
Coil Data
Coil voltage range 3 to 48VDC
Operative range, IEC 61810 2
Coil insulation system according UL Class A, B, F
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10 % mW
003 3 2.1 0.3 25 360
005 5 3.5 0.5 70.0 360
006 6 4.2 0.6 100 360
009 9 6.3 0.9 225 360
012 12 8.4 1.2 400 360
024 24 16.8 2.4 1600 360
048 48 33.6 4.8 6400 360
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Insulation Data
Initial dielectric strength
between open contacts 750V
rms
between contact and coil 1500V
rms
Clearance/creepage
between open contacts >1.6mm
between contact and coil >3.2mm
Clearance/creepage
between open contacts, standard type >1.6mm
for 6kV dielectrial strength type >4mm
between contact and coil, standard type >3.2mm
for 6kV dielectrial strength type >4mm
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -30°C to +70°C
Category of environmental protection
IEC 61810 RTII - flux proof
RTIII - wash tight
Weight 9.5g
Resistance to soldering heat THT
IEC 60068-2-20 RTII: 270°C/10s
RTIII: 260°C/5s
Packaging/unit tube/25, carton box/1000
Accessories
Product Code Description
27E1064 Socket, rated 10A at 300VAC. UL Recognized for US
and Canada. Designed to fit same suggested board
layout as relay.
Z
t