Datasheet

1
10-2017, Rev. 1017
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
AXICOM
Signal
Signal Relays
n
Standard DIL relay
n
Dimensions 20x10x11mm (.795x.394x.433”)
n
Switching and continous current 3A
n
2 form C contacts (2 CO, 2 changeover contacts)
n
Immersion cleanable
n
Four different coil sensitivities, 150mW, 200mW, 400mW, >500mW
n
Surge voltage resistance meets FCC Part 68 requirement: 1.5kV
(10/700μs) between coil and contacts
Typical applications
Communications equipment, office equipment, measurement and control
equipment, entertainment electronics, medical equipment, consumer
electronics.
Approvals
UL 508; UL/CSA 60950-1 File No. E 111441
Technical data of approved types on request
Contact Data
Contact arrangement 2 form C (CO)
Max. switching voltage 220VDC, 250VAC
Rated current 3A
Limiting continuous current, 85°C 3A
Contact material AgNi, gold-covered
Min. recommended contact load 10mA at 20mV
Minimum switching voltage 100μV
Initial contact resistance <100mΩ at 10mA, 20mV
Frequency of operation without load max. 50 operations/s
Operate / release time max. 6ms/4ms
Bounce time max. 5 ms
Electrical endurance
at 230VAC/0.5A typ. 3x10
5
operations
at 6VDC/0.1A typ. 2x10
6
operations
at 30VDC/1A typ. 5x10
5
operations
at 30VDC/2A typ. 1x10
5
operations
UL contact ratings 60 VDC, 0.3 A
30 VDC, 1 A
24 VDC, 1.25 A
42.4 V peak, 50/60 Hz, 0.5 A
42.4 V peak, 50/60 Hz, 1 A
(2 NO/NC contacts provided)
Mechanical endurance typ. 15x10
6
operations
Coil Data
Magnetic system neutral
Coil voltage range 3 to 48VDC
Max. coil temperature 85 °C
Thermal resistance < 85K/W
Coil versions, monostable
Coil Rated Operate Limiting Release Coil Rated coil
code voltage voltage Voltage voltage resistance power
VDC VDC
min.
VDC
max.
VDC
min.
Ω±10% mW
150mW coil power
001 5 4.0 11.7 0.25 167 150
002 6 4.8 14.0 0.30 240 150
006 9 7.2 21.0 0.45 540 150
003 12 9.6 28.0 0.60 960 150
005 24 19.2 56.0 1.20 3840 150
200mW coil power
308 3 2.1 6.1 0.15 45 200
301 5 3.5 10.1 0.25 125 200
302 6 4.2 12.2 0.30 180 200
306 9 6.3 18.2 0.45 405 200
303 12 8.4 24.3 0.60 720 200
305 24 16.8 48.6 1.20 2880 200
307 48 33.6 97.2 2.40 11520 200
400mW coil power
401 5 3.5 7.2 0.25 62 400
402 6 4.2 8.6 0.30 90 400
406 9 6.3 12.9 0.42 203 400
403 12 8.4 17.2 0.60 360 400
405 24 16.8 34.3 1.20 1440 400
407 48 33.6 68.6 2.40 5760 400
>500mW coil power
501 5 3.5 6.1 0.25 36 695
502 6 4.2 7.3 0.30 70 515
506 9 6.3 10.9 0.45 140 580
503 12 8.4 14.5 0.60 280 515
505 24 16.8 29.1 1.20 1050 550
507 48 33.6 58.1 2.40 4000 575
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
D2n* Relay V23105
Z