Datasheet

10-2014, Rev. 1014
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
SCHRACK
General Purpose Relays
PCB Relays
Slimline PCB Relay SNR
n
1 pole 6A, 1 form C (CO), 1 form A (NO)
n
Only 5mm wide
n
Flat pack version available
n
Sensitive coil 170mW
n
Reinforced insulation (protection classII)
n
Strong coil pins for DIN-rail socket
n
Allows high function- / packaging density
n
Cadmium-free contacts, AgNi 90/10 for AC-loads
Typical applications
Interface technology, PLC’s, timers, centralized and decentralized heating
control
Approvals
VDE Cert. No. 40010063, UL E214025
Technical data of approved types on request
Contact Data
Contact arrangement 1 form C (CO) or 1 form A (NO)
Rated voltage 250VAC
Max. switching voltage 400VAC
Rated current 6A
Limiting making current, max 4s, df 10% 10A
Breaking capacity max. 1500VA
Contact material AgSnO
2
, AgSnO
2
AgNi 90/10 gold plated
Min. recommended contact load 100mA, 12V 50mW
Frequency of operation, with/without load 6/1200min
-1
Operate/release time max. 12/5ms
Bounce time max., form A/form B 3/8ms
Contact ratings
Type Contact Load Cycles
EC 61810
V23092-*****-A301, -A801 C (CO) 6A, 250VAC, cosφ=1, 85°C 5x10
3
UL 508
V23092-*****-A301, -A801 A/B 6A, 250VAC,
general purpose, 85°C 6x10
3
V23092-*****-A301, -A801 A/B (NO) B300, 85°C 6x10
3
V23092-*****-A301, -A801 A/B R300, 85°C 6x10
3
EN60730-1
V23092-*****-A302 A (NO) 3A (1.5A), 250VAC, 85°C 100x10
3
V23092-*****-A302, -A802 A (NO) 5A (1.5A), 250VAC, 85°C 10x10
3
Mechanical endurance, DC coil 10x10
6
operations
Coil Data
Coil voltage range 5 to 60VDC
Operative range, IEC 61810 2
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10%
1)
mW
005 5 3.5 0.25 147 170
012 12 8.4 0.6 848 170
024 24 16.8 1.2 3390 170
048 48 33.6 2.4 10600
1)
217
060 60 42.0 3.0 20500
1)
176
1) Coil resistance ±15%.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Insulation Data
Initial dielectric strength
between open contacts 1000V
rms
between contact and coil 4000V
rms
Clearance/creepage
between contact and coil ≥6/8mm
Material group of insulation parts IIIa
Tracking index of relay base PTI250
F0140-D
Z