Datasheet

ManualsBrandsTE Connectivity ManualsPower RelaysPCB Power Relay V23148, 1CO, DC, 48V, 1.75kOhm

10-2018, Rev. 1018

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

SCHRACK

General Purpose Relays

PCB Relays

1 pole 7A, mono or bistable

1 form C (CO) or 1 form A (NO) or 1 form B (NC contact)

Bistable and DC version

Wash tight version

Version for 10A on request

Typical applications

Heating control, installation, battery powered equipment

Approvals

UL E214024

Technical data of approved types on request

Contact Data Standard Bistable Sensitive

Contact arrangement 1 form C (CO) or

1 form A (NO) or

1 form B (NC)

Rated voltage 250VAC

Max. switching voltage 400VAC

Rated current 7A 7A 5A

Limiting making current,

max 4 s, duty factor 10% 12A 12A 12A

Breaking capacity max. 1750VA 1750VA 1250VA

Contact material AgNI 90/10 AgNI 90/10 AgNI 90/10

Frequency of operation,

with/without load 600/18000h

-1

Operate/release time typ. 5/3ms - 7/3 ms

Set/reset time typ. - 5/3 ms -

Bounce time typ., form A/form B 2/10 ms 2/10 ms 2/10 ms

Mechanical endurance >20x10

operations

Contact ratings

Type Contact Load Cycles

UL508

U/UB C/A/B (CO/NO/NC) 7A, 250VAC,general purpose, 40°C 6.000

Coil Data Standard Bistable Sensitive

Coil voltage range 5 to 48 VDC 3 to 48 VDC 5 to 48 VDC

Operative range IEC 61810 2 2 2

Reset voltage min.,

% of rated coil voltage - 25% -

Reset voltage max.,

% of rated coil voltage - 45% -

Rated operate power - 900 to 1300mW/20ms -

Coil versions, DC coil

Coil Rated Operate Release Coil Rated coil

code voltage voltage voltage resistance power

VDC VDC VDC Ω±10% mW

Standard coil

002 5 3.5 0.5 56 446

003 6 4.2 0.6 80 450

005 12 8.4 1.2 320 450

007 24 16.8 2.4 1280 450

008 48 33.6 4.8 3800 606

Sensitive coil

102 5 3.7 0.5 80 313

103 6 4.4 0.6 110 327

105 12 8.8 1.2 440 327

107 24 17.5 2.4 1780 324

108 48 35.0 4.8 4000 576

All ﬁgures are given for coil without pre-energization, at ambient temperature +23°C.

Other coil voltages on request.

Power PCB Relay U/UB (V23148)

Summary of content (3 pages)

PAGE 1
General Purpose Relays PCB Relays SCHRACK Power PCB Relay U/UB (V23148) n n n n n 1 pole 7A, mono or bistable 1 form C (CO) or 1 form A (NO) or 1 form B (NC contact) Bistable and DC version Wash tight version Version for 10A on request Typical applications Heating control, installation, battery powered equipment Z Approvals UL E214024 Technical data of approved types on request Contact Data Standard Bistable Sensitive Contact arrangement 1 form C (CO) or 1 form A (NO) or 1 for
PAGE 2
General Purpose Relays PCB Relays SCHRACK Power PCB Relay U/UB (V23148) (Continued) Coil versions, bistable 1 coil Coil Rated Set code voltage voltage VDC VDC 001 3 2.3 002 5 3.9 003 6 4.7 005 12 9.4 007 24 18.7 008 48 37.4 Reset voltage VDC 0.75 1.25 1.5 3.0 6.0 12.
PAGE 3
General Purpose Relays PCB Relays SCHRACK Power PCB Relay U/UB (V23148) (Continued) Product code structure Typical product code V23148 -A 0 0 07 -A 101 Type V23148 Power PCB Relay U/UB Version A Monostable (Miniature power relay U) B Bistable (Miniature power relay UB, remanence version) Dielectric strength coil-contact 0 2kVrms 1 Version Monostable 0 Standard 1 Sensitive 4KVrms Bistable Standard 0 Coil Coil code: please refer to coil versions table Contact configuration A 1 form C contact (