Table des tigresses 1 General Description 2 User mode. 2.1 Advertisement .. 2.2 Scan Response.. 23 Services 2.3.1 Vibration sensor service. 2.3.2 Battery SERVICE 11 2:3:3 Device name service .. 2:34 Custom data service... . 24 BATTERY sins sass stasis sss ssa st sss ssa sod sss sass sod sss sass sot assassin 12 241 SAFTLS17330.
4 GENERAL DESCRIPTION The 8531RY operates aa a smart device. If offers sensing, processing, and wire's communication capabilities. The solution consists of sensitive elements such as accelerator and temperature sensors combined with embedded microprocessor. The device acquires rew data and then i transmits #5 over Bluetooth at the programmable infernal. When the device ls powered on, a yellow LED blinks to confirm the proper battery Insertion. 4.
The 8531JC comes with different modes of operation which are sited barrow: Cer ee Top Erna Favorably Mods used by manufacturing, it allows sensor calibration and offer Factory rely dedicated test-mads functionalities for RF testing, calibration, and current consumption measurements. User User mods. Mona DEL Mods used during FW update. OTA upscale 2 USER MODE 2% Advertisement INTERVALS When the battery is inserted, a yellow LED will light for 500ms to confirm proper battery insertion.
After 20 seconds, the device will advertise at 10s Interval till the next measurement. During, this phase, the connection could be Impossible.
Connection Is possible after each measurement Configurable period between minutes to 24 hours. Aid Sl Available characteristics can be read/ Ldn Disconnection This sensor is compatible with BLE 6 and older versions. If a connection occurs, the user will have the opportunity to update manufacturer specific SIDS or retrieve last measurement data through the vibration sensor services and its Catalog commands.
MANUFACTURER SPECIFIC DATA cl (LSB FIRST) cl 2 Bytes TE Connectivity Company Identifier Unsigned integer Constant value: (x08DE CST 10 Bytes Custom Data Unsigned integer Default value: CNT 4 Bytes Number of measures done since the sensor start-up or last reset.
DATA CHARACTERISTIC BYTES FIELDS Data Is composed of a minimum of 2 parts: 1 header + X measures Header for gate axis measurement (minimum size is 32 Myles fields): MAGIC PINPOINT FREQUENCY | FIRSTBORN (LSB FIRST) MAGIC 4 Bytes Integrity Indicator Unsigned integer Constant value: OXAAABBAAA TEMP 4 Bytes Temperature value (°C) Signed integer Temperature = TEMP / 100 Resolution: 0.
+ {ne block for the header. it Indicated Count = 2, Axis Several boss (ph block) for the fete for als X + Efe.
SOMATOSENSORY 1 Byte Sensor status Unsigned integer 0x00 => Sensor OK 0x01 => Sensor ERROR Battery service yun B614C000-B14A-40A6-B63F-0188F7868E13 AVAILABLE CHARACTERISTICS NAME uuD YES READ / Wi NOTIFIED Data B614C001-B14A-40A6-B63F-0166F7868E13 4 Read YES Battery change B614C002-B14A-40A6-B63F-0166F7868E13 1 Writs NO DATA CHARACTERISTIC BYTES FIELDS BATTLEFIELD BATTLEFIELD 4 Bytes Battery Level Float (IEEE-754) Range vagus = [0 100] ATE version will use a specific battery which will be implemented BATTER
SRE Custom delve service bub B614CD00-B14A-40A6-B63F-0166F7868E13 AVAILABLE CHARACTERISTICS Custom Advertisement Data B614CD01-B14A-40A6-B63F-0166F7868E13 Custom Advertisement Data Is a 10 bytes field. This characteristic allows to change the data sent in the CST field of the advertisement frame. 24 BATTERY | BART L835 The 8311EX Ia deliverable with a 3.6V battery.
UJ Two different functions are available depending on the wer action: Function: User action LED i J One short blink. If user holds the magnet close to Activates BLE for another one hour plus rigs a new the switch for a longer duration, the LED will blink measurement. Short tap faster. Remove the magnet to only Initiate a transmission. Else it going to initiate a sensor reset. Wait for at least 10 seconds, to see the very fast Resets the sensor. Hold the net blink.
& REGULATION 1 FOC This device complies with part 15 of the FCC Rules. Operation Is subject to the following two conditions: (1) This device may not cause harmful Interference, and (2) This device must accept any Interference received, including interference that may cause undesired operation. NOTE: The grantee Is not responsible for any changes or modifications not expressly approved by the party responsible Jor compliance.