User's Manual

Connection/Link to a Mobile Handset
When pairing is completed, the headset is in standby mode. Before you place or answer a call, if the headset ICON
is not displayed on the handset screen, please follow the simple steps to activate the Bluetooth connection/link
through your handset or headset until the headset ICON is on the screen.
(a) On Handset: Select “Alcatel OT-BM82” from the list of paired devices on your handset screen.
(b) On Headset: Short press the headset ON/OFF and select “Accept” on the handset screen to accept the
connection.
IMPORTANT:
Whenever the Bluetooth connection/link is removed and you cannot see the headset ICON on your mobile phone’s
screen, please follow the activate connection/link steps.
Disconnection to the Mobile Handset
You may connect your headset with another Bluetooth mobile handset. Please follow the simple steps to disconnect
your Bluetooth headset with the pre-paired handset.
(a) Power off the headset.
(b) Select “Disconnect” to remove the previous connection from your handset list.
Using the Headset
Once the pairing is completed and the battery is fully charged, you may access the following functions. Some of the
functions listed below are only accessible on handsets supporting a Hands-Free Profile.
(a) Answering a Call:
To answer a call, wait for the ringing tone from the headset, then short press the MFB on your Bluetooth headset
to accept the call, or answer the call via your mobile handset in the normal way.
(b) Ending a Call:
Short press the MFB, to end your call or end the call via your mobile handset in the normal way. You will hear a
beep from the headset when your call is completed.
(c) Reject a Call:
When you hear the ringing tone, press and hold the MFB on your Bluetooth headset for 3 seconds until you hear
a beep.
(d) Last Number Re-Dial:
In standby mode, short press the MFB button twice to redial the last number.
(e) Adjusting the Volume:
During conversation, press the volume buttons repeatedly until you reach the desired volume level.
(f) Mute & Un-mute:
(1)Mute the headset: Press the V- button for 3 seconds. The LED will flash blue.
(2)Un-mute the headset: Press the V- button for 3 seconds. The LED will flash blue.
(g) Call Inter-Changing:
(1)Headset to Handset: During conversation, press V+ button for 3 seconds.
(2)Handset to Headset: Press the V+ button for 3 seconds or MFB button, depending on the features available
on your phone model.
3/6