You have purchased a product which uses the open source (http://opensource.org/) programs mtd, msdosfs, netfilter/iptables and initrd in object code and other open source programs licensed under the GNU General Public License and Apache License. We will provide you with a complete copy of the corresponding source codes upon request within a period of three years from the distribution of the product by TCT. You may download the source codes from http://sourceforge.net/projects/alcatel/files/.
Table of Contents 1. Your device ........................................................................................................................................ 3 1.1 Appearance illustration ....................................................................................................... 3 1.2 Home screen ...................................................................................................................... 5 1.3 Apps and widgets ................................................
Exercise caution when holding your device near your ear while the loudspeaker is in use.
1. Your device 1.1 Appearance illustration a. Micro USB connector/ Battery charge interface b. Front camera c. Earphone interface d. Micro phone e. Power key f. Volume Up/Down g. Rear camera h.
4
Note: Please charge before first use. Normally, long press the Power key will power the pad on and the Home Screen will show up, but a battery icon will show instead of the Home Screen when the pad is lack of power, that indicates you should charge before use. Use only charger recommended by TCT Mobile Limited and its affiliates. 1.2 Home screen Your device includes five pages of Home screen giving you more space to add your own favorite apps, folders, and widgets for one-touch access.
● Icons on your screen Icon Name Google search Description Touch it to access the Google search engine. All apps Use Voice Actions to watch a video, send email, set alarm, get directions, etc. Touch to show all apps list interface. Back Go back to previous menu or screen. Home Background program Wi-Fi Return to home screen. Voice actions Press to view background program list. Press to view Wi-Fi connection.
On the right of the screen bottom, there is a notification bar . A hidden menu will popup when you press the bar, which includes time, date, network connection and battery information, etc. For setting. further operation, you can press 1.3 Apps and widgets ● Apps The Applications (apps) list contains all pre-embedded and newly installed apps. To access the apps list, touch the all apps key from Home screen.
● Remove apps icon from desktop Touch and hold the icon you want to delete from the desktop, drag it right over the " appears right in the middle of the screen top. ", which ● Uninstall apps Press to enter all Apps, then touch and hold the Apps icon you want to uninstall, drag it over the , which appears top-left in the desktop. 1.4 Basic Operation ● Power on your device Long press the Power key until the pad powers on. It will take some seconds before the screen lights up. ● Power off your device 1.
Note: without operation, the product will enter stand-by mode automatically. Press Power key once to wake it up.
● Reset your device When your device is out of function, 1. You can press power button and volume up at the same time to enter Recovery screen to restart the device (Referring to Page 10). 2. Long press the Power key about 10 seconds to shut down your device. Then press the Power key to restart. ● Connect to a computer via USB When connecting your device to computer by USB, Select Setting\Storage\ \ , Turn on USB storage, you can transfer files between your device and the computer.
the screen (for Gallery images) or Set wallpaper; For another way is following the steps Settings > DEVICE > Display > Wallpaper. ● Wi-Fi To turn Wi-Fi on and connect to a wireless network • Touch Application tab from the Home screen. • Select Settings\Wireless & networks\Wi-Fi. • Mark/Unmark the checkbox to turn on/off Wi-Fi. • Touch Wi-Fi. The detailed information of any detected Wi-Fi networks are displayed in the Wi-Fi networks section. • Touch a Wi-Fi network to connect.
2. Settings 2.1 Device 2.1.1 Sound You can set Volumes, Touch sounds and Screen lock sound to your preference with the Volume up/down key, or touch Settings\DEVICE\Sound. 2.1.2 Display Touch settings> DEVICE >Display, you can see the items: Brightness: adjust your screen in a comfortable brightness Wallpaper: set your wallpaper Auto-rotate screen: mark the checkbox, to enable or disable auto-rotation Sleep: set Screensavers time Font size: select a suitable font size for your tablet 2.1.
2.2 Personal Language & input Touch Settings>PERSONAL>Language & input to view or set system language and input methods. Language: set the system language Keyboard & input methods: check and select all the input methods installed in the pad. 2.3 System 2.3.1 Date & time Touch Settings>SYSTEM>Date & time, to set date, time and format. 2.3.2 About tablet Touch Settings>SYSTEM>About tablet to check legal information, tablet status and software version, etc. 2.3.
Tips: please make sure that all the important data have been backed-up before you run factory data reset, for this function will erase all apps and data that user installed; and remaining the battery is more than 50%.
3.Recovery Recovery operation procedures 1) In power-off status, press and hold down the Vol+ key, then long press the Power key to enter the recovery mode. The system will show a screen containing a robot and a red triangle with an exclamation mark inside. 2) In Recovery mode, you can use Vol+/- key to scroll through the options, then press Power key to enter.
SATEFY INFORMATION We recommend that you read this chapter carefully before using your device. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use or use contrary to the instructions contained herein. ● TRAFFIC SAFETY Given that studies show that using a device while driving a vehicle constitutes a real risk, even when the hands-free kit is used (car kit, headset...), drivers are requested to refrain from using their device when the vehicle is not parked.
Switch the device off when you are near gas or flammable liquids. Strictly obey all signs and instructions posted in a fuel depot, petrol station, or chemical plant, or in any potentially explosive atmosphere. When the device is switched on, it should be kept at least 15 cm from any medical device such as a pacemaker, a hearing aid or insulin pump, etc. In particular when using the device, you should hold it against the ear on the opposite side to the device, if any.
Remember to make back-up copies or keep a written record of all important information stored in your device. Some people may suffer epileptic seizures or blackouts when exposed to flashing lights, or when playing video games. These seizures or blackouts may occur even if a person never had a previous seizure or blackout.
Please note that you must respect the laws and regulations in force in your jurisdiction or other jurisdiction(s) where you will use your device phone regarding taking photographs and recording sounds with your device. Pursuant to such laws and regulations, it may be strictly forbidden to take photographs and/or to record the voices of other people or any of their personal attributes, and duplicate or distribute them, as this may be considered to be an invasion of privacy.
These collection points are accessible free of charge. All products with this sign must be brought to these collection points.
In non-European Union jurisdictions: Items of equipment with this symbol are not to be thrown into ordinary bins if your jurisdiction or your region has suitable recycling and collection facilities; instead they are to be taken to collection points for them to be recycled. ● CHARGERS Mains powered chargers will operate within the temperature range of: 0°C to 40°C. The chargers designed for your device meet with the standard for safety of information technology equipment and office equipment use.
Maximum SAR for this model and conditions under which it was recorded: Wi-Fi + Blue Tooth version (Body-worn) 1.466W/Kg During use, the actual SAR values for this device are usually well below the values stated above. This is because, for purposes of system efficiency and to minimize interference on the network, the operating power of your device is automatically decreased when full power is not needed. The lower the power output of the device, the lower its SAR value.
against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
● LICENCES Micro SD Logo is a trademark. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. And any use of such marks by TCT Mobile Limited and its affiliates is under license. Other trademarks and trade names are those of their respective owners. ONETOUCH TAB 8HD Bluetooth QD ID B021123 TouchPalTM and CooTekTM are trademarks of Shanghai HanXiang (CooTek) Information Technology Co., Ltd. and/or its Affiliates. The Wi-Fi Logo is a certification mark of the Wi-Fi Alliance.
TruMedia, SRS and the symbol are trademarks of SRS Labs, Inc. TruMedia technology is incorporated under license from SRS Labs, Inc. SRS TruMedia™, a feature-rich audio solution tuned specifically for mobile devices, provides a cinema-like surround headphone performance with deep, rich bass.
General information Internet address: www.alcatelonetouch.com TCT Mobile Limited address: Room 1910-12A, Tower 3, China HK City, 33 Canton Road, Tsimshatsui, Kowloon, Hong Kong. Hot Line Number: see “TCT Mobile Services” leaflet or go to our website. On our website, you will find our FAQ (Frequently Asked Questions) section. You can also contact us by e-mail to ask any questions you may have.
This handset may contain materials, including applications and software in executable or source code form, which is submitted by third parties for inclusion in this handset (“Third Party Materials”).