Table of Contents Chapter 1: Introduction Precautions ................................................................................................................................................................ 3 Product ................................................................................................................................................................... 3 Power and Plug ..........................................................................................................
Introduction Chapter 1 Keep the set away from direct sunlight. Precautions The set shall not be exposed to drips or splashes and no objects filled with liquids, such as vases, shall be placed on the set. Do not use the set in dusty environments. Read all of the instructions before operating the set. Keep these instructions well for future use.
Connections and Setup Chapter 2 Buttons on the TV 1. PR-/+ (PROGRAM DOWN/UP) button Scans down/up through the channel list. In the menu system, PROGRAM DOWN acts like the down direction button on the remote and adjusts menu; PROGRAM UP acts like the up direction buttons on the remote and adjusts menu controls. 2. VOL-/+ (VOLUME DOWN/UP) button Decreases/increases the volume.
Connections and Setup HDMI1 or HDMI2 or HDMI3 socket (input) The HDMI (High-Definition Multimedia Interface) socket can be used to connect a blu ray, PC with a compatible video card installed, certain DVD players or a high-definition compatible digital satellite decoder. This socket provides an uncompressed digital connection that carries both video and audio data by way of an integrated mini-plug cable.
Connections and Setup Remote control functions Most of your television's functions are available via the menus that appear on the screen. The remote control supplied Note: You are recommended to use the full screen mode. Do not use the display mode with black bars on both sides of the picture (such as 4:3) for a long time; otherwise the TV screen may be damaged permanently. 3D To toggle among the 3D input format options. TV Standby / quit standby. To access TV mode.
Connections and Setup Switching on Follow the instructions on this page on how to switch on your TV set and the remote control before going on to following pages describing how to use the channel set-up procedure. 1. Insert two AAA batteries in the remote control. Precautions on using batteries: - Only use the battery types specified. - Make sure you use the correct polarity. - Do not mix new and used batteries. - Do not use rechargeable batteries.
Menu Operation Chapter 3 Menu Display Initial setup Welcome Welcome to use the Wizard for Initial Setup !! Please press [OK] to start the wizard. PAP Picture Sound Timer Installation Figure 1 CEC Standard Version Info 60 Contrast 50 Audio delay Saturation 50 Wide Stereo 8 Normal OK Menu Exit Screen mode Back Auto format Exit Advanced settings 16:9 format On Menu ... Exit ...
Menu Operation Using Menu System Sound Menu This section explores the menus of your TV. Each menu is outlined and detailed to help you get the most from your TV. To access the menu system: Display the main menu by pressing the Menu button and select Sound, then press OK to confirm. The Sound menu appears with the following options(see figure 4): 1. Press Menu to display the main menu. 2. Press / / / to select the desired item, then press OK button to open the corresponding submenu. 3.
Menu Operation Note: press / to toggle the focus window. When the focus is on the TV window, digit keys and PROGRAM UP/DOWN work in TV mode. When the focus is on the other window, PROGRAM UP/DOWN switches available external sources. Installation 1. Select Installation > Automatic update menu 2. Press OK/ to start to update the channels. To stop the update process, press the Menu button. 3. When the search is completed, press Menu/ to return, or press OK to restart. Analogue Manual scan 1.
Menu Operation Input lock: this option allows you to lock a certain external source. Press OK/ to display Input lock menu, then press / to select a certain external source, and press OK to lock. To unlock, use the same same operation. Note: when the current input is locked, you can press OK and enter the password to enter. Front panel lock: press set's buttons.
Menu Operation Network update: press MENU, then select Options > Network update. Select On/Off to enable or disable the network update function. - When this function is on, the TV will automatically update channels if your DTV service provider updates their DTV network. - When this function is off, you need to run the channel Search again to get new channels or remove unavailable channels if your DTV service provider adds or removes channels from their DTV network.
Chapter 4 Advanced Functions Network connection You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection. Connecting to a wired network You can attach your TV to your LAN using cable in three ways: - You can attach your TV to your LAN by connecting the LAN port on your TV to an external modem using a Cat 5 cable.
Advanced Functions control to directly enter Channel list selection. Enabling DLNA function Select Setup > Network >Applications > DLNA, and set it to On. Follow the steps in turn specified hereafter, then you can enjoy recorded video, image and music saved on your PC. Adding media from your PC for sharing Install a DLNA media server on your PC. The simple and familiar server you may install is Microsoft Windows Media Player 11 and 11 above.
Advanced Functions T-Link Use this function to search for CEC devices connected to the HDMI sockets in your TV and enable one-touch play and one-touch standby between CEC devices. Enable or disable T-Link 1. Press MENU on the remote control, then select Options > T-Link. 2. Press / to select On or Off, if this function is turned on, T-Link option will be available in the Quick access menu which you enter by pressing the Option button on the remote control.
Advanced Functions Video Use this function to watch videos, if available. 1. Select Smart TV > Media > Video, then press OK to enter the main file content browser. 2. Use / / / to select a video in either main or sub file content browser in the same way as in photo display function, press MENU to display The video menu in folder mode. - Sort: Sort folders and videos by Type, modification Date or Name. - Edit: Copy, paste or delete a selected video.
Advanced Functions Notes: - Feature available only for digital non encrypted channels. Even when CICAM (CI or CI+) is inserted, feature is not available on encrypted channels. - Before you connect the USB drive to the set, make sure you have backed up the data in the drive to avoid the loss of your important data due to unforeseen malfunction - The bigger the USB drive free memory for the PVR function, the bigger the recording length.
Other Information Chapter 5 Troubleshooting Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. 1. Adjust the position and orientation of the indoor/outdoor antenna. 2. Check the connection of antenna. 3. Fine tune the channel. 4. Try another channel. Broadcasting failure may happen. No picture, no sound 1. Check if the fuse or circuit breaker is working. 2. Plug another electrical device into the outlet to make sure it is working or turned on. 3.
72-MMT51A-EAUAB