BM63SPKA1MGA BM63SPKA1MGA Bluetooth 3.0 Digital Audio Output Module 5F, No.5, Industry E. Rd. VII, Hsinchu Science Park, Hsinchu city 30077, Taiwan, R.O.C Phone: 886-3-577-8385 Fax: 886-3-577-8501 Version:1.
BM63SPKA1MGA Product Description The ISSC BM63SPKA1MGA is a highly integrated Bluetooth 3.0 digital audio output module, designed for high data rate, short-range wireless communication in the 2.4 GHz ISM band. With the built-in ISSC Bluetooth stack, profiles and digital audio interface, the ISSC BM63SPKA1MGA can combine the external DSP and codec to provide high performance Bluetooth audio. Features Main Chip: ISSC IS2063GM(Flash version) Bluetooth 3.0 compliant Max.
BM63SPKA1MGA Module Pin Out Diagram BM63SPKA1MGA DR0 RFS0 SCLK0 DT0 AOHPR AOHPM AOHPL MICN1 MICP1 MICBIAS AIR AIL P12 P13 RST_N P01 P24 P04 P15 GND P05 P30 P27 P20 P02 P31 P33 P36 DP DM EAN P03 P00 P35 P37 GND LED1 LED2 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 20 21 22 23 24 25 26 27 28 29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 ANT1 ANT2 ANT3 HCI_RXD HCI_TXD CODEC_VO VDD_IO ADAP_IN BAT_IN AMB_DET SYS_PWR PWR(MFB) LED3 49 50 51 ISSC Confidential (Version: 1.
BM63SPKA1MGA Pin Definition for Flash module Pin No. Pin type Name Description 1 I DR0 I2S interface: Digital Left/Right Data from ADC 2 O RFS0 I2S interface: DAC Left/Right Clock 3 O SCLK0 4 O DT0 5 O AOHPR R-channel analog headphone output 6 O AOHPM Headphone common mode output/sense input.
BM63SPKA1MGA Pin No.
BM63SPKA1MGA Pin No. Pin type Name Description 47 I/O P05 48 P GND Line-in Detector GPIO, default pull-high input Charger Status Ground Pin 49 P ANT1 Antenna modification point 50 P ANT2 Antenna modification point 51 P ANT3 Antenna modification point Block Diagram BT 3.0 Transceiver BUS PMU BT 3.
BM63SPKA1MGA Digital Audio Interface Support I2S and PCM interface Sampling Rate : 8K, 16K, 44.1K, 48K, 88.2K, 96K Word Length: 16 bits, 24 bits 4 application modes ISSC Confidential (Version: 1.
BM63SPKA1MGA Mode 1: I2S Master BM63 External CODEC/DSP BCLK ADCLRC DACLRC ADCDAT ADC DACDAT Slave SCLK0 A2DP/SCO RFS0 SCO TFS0 DR0 LineIn ADC DT0 Master DAC 1/fs SCLK0 Left Channel RFS0 DR0/DT0 Bn-1 Bn-2 Right Channel B1 B0 Bn-1 Bn-2 B1 B0 Word Length or Solutions with mic and line-in analog input with I2S audio output Mic for Bluetooth SCO link Line-in for external audio playback(for high SNR requirement) External CODEC/DSP DAC LineIn BM63 BCLK ADCLRC DACLRC ADCDAT DACDAT SC
BM63SPKA1MGA Mode 2: I2S Slave BM63 External CODEC/DSP BCLK ADCLRC DACLRC ADCDAT ADC DACDAT Master SCLK0 A2DP/SCO RFS0 SCO TFS0 DR0 LineIn ADC DT0 Slave DAC 1/fs SCLK0 Left Channel RFS0 DR0/DT0 Bn-1 Bn-2 Right Channel B1 B0 Bn-1 Bn-2 B1 B0 Word Length or Solutions with mic and line-in analog input with I2S audio output Mic for Bluetooth SCO link Line-in for external audio playback(for high SNR requirement) External CODEC/DSP DAC LineIn BM63 BCLK ADCLRC DACLRC ADCDAT DACDAT SCL
BM63SPKA1MGA Mode 3: PCM master BM63 External CODEC/DSP BCLK ADCLRC DACLRC ADCDAT ADC DACDAT Slave SCLK0 A2DP/SCO RFS0 SCO TFS0 DR0 LineIn ADC DT0 Master DAC 1/fs SCLK0 RFS0 Left Channel DR0/DT0 Bn-1 Bn-2 Right Channel B1 B0 Bn-1 Bn-2 B1 B0 Word Length ISSC Confidential (Version: 1.
BM63SPKA1MGA Mode 4: PCM slave BM63 External CODEC/DSP BCLK ADCLRC DACLRC ADCDAT ADC DACDAT Master SCLK0 A2DP/SCO RFS0 SCO TFS0 DR0 LineIn ADC DT0 Slave DAC 1/fs SCLK0 RFS0 Left Channel DR0/DT0 Bn-1 Bn-2 Right Channel B1 B0 Bn-1 Bn-2 B1 B0 Word Length ISSC Confidential (Version: 1.
BM63SPKA1MGA Outline Dimension (Module Foot print) ISSC Confidential (Version: 1.
BM63SPKA1MGA ISSC Confidential (Version: 1.
BM63SPKA1MGA Electrical Characteristics Table 1: Absolute Maximum Voltages Min Max +85ºC ESD: Human Body Mode -40ºC ±2KV ESD: Machine Mode ±200V ESD: Charge Device Mode ±200V Core supply voltage VDD_CORE, AVDD_PLL 1.14V 1.26V RF supply voltage VCC_RF 1.22V 1.34V SAR supply voltage AVDD_SAR 1.62V 1.98V Codec supply voltage VDD_AUDIO 2.7V 3.0V I/O voltage VDD_IO 3.6V BK_VDD 4.5V 3V1_VIN 4.5V Storage Temperature Supply voltage BAT_IN 3.0 4.5V ADAP_IN 4.5 7.0V LED 5.
BM63SPKA1MGA Table 3: BUCK switching regulator Normal Operation Min Operation Temperature -40 Input Voltage (VIN) 3.0 Output Voltage (VOUT) (ILOAD=70mA, VIN=4V) 1.7 Typ Max 85 Unit ℃ 3.8 4.5 V 1.80 2.05 V Output Voltage Accuracy ±5 % Output Voltage Adjustable Step 50 mV/Step Output Adjustment Range -0.1 Output Ripple 10 Average Load Current (ILOAD) Settling Time (start-up time) Conversion efficiency @BAT=3.
BM63SPKA1MGA Table 4: Low Drop Regulation Min Operation Temperature -40 85 Unit ℃ Input Voltage (VIN) 3.0 4.5 V Output Voltage (VOUT) (1) VOUT_CODEC (2) VOUT_IO VOUT = 2.9V (2.4~3.4V) 2.9 VOUT = 1.8V (1.3~2.3V) 1.8 Max V Accuracy (VIN=3.7V, ILOAD=100mA, 27’C) Output Voltage Adjustable Step 67 Output Adjustment Range Start-up Inrush Current Typ ILOAD=10mA Settling Time (start-up time) EN or VIN to VOUT ±5 % 100 ±0.
BM63SPKA1MGA Table 5: Battery Charger Charging Mode (BAT_IN rising to 4.2V) Min Operation Temperature -40 Typ Max 85 Unit ℃ 5.0 7.0 V 3 4.5 mA Input Voltage (VIN) 4.5 Note: It needs more time to get battery fully charged when VIN=4.5V Supply current to charger only Battery trickle charge current 0.1C (BAT_IN < trickle charge voltage threshold) Maximum Battery Fast Charge Current Note: ENX2=0 Headroom > 0.7V (ADAP_IN=5V) Headroom = 0.3V (ADAP_IN=4.
BM63SPKA1MGA Table 6: Audio codec ADC Conditions Temperature Min Typ Max -40 25 85 Unit ℃ 16 Bits 48 KHz Resolution Input sample rate, Fsample 8KHz for MIC 44.1/48KHz for Line-in fin=1KHz Signal to Noise Ratio (SNR @MIC or Line-in mode) 8KHz B/W=20~20KHz (A-weighted) 44.1/ THD+N < 1% 48KHz 2.26Vpp input Digital Gain 8 90 92 dB 90 92 -54 Digital Gain Resolution 4.
BM63SPKA1MGA MIC Boost Gain and PGA Gain are controlled by DSP F/W AIL MICP1 MICN1 + + MIC AMP LINE AMP - - MIC Boost Gain 0dB or 20dB 1-bit SD ADC Digital Codec DSP Core ADC Digital Gain DSP Digital Gain -54 ~ 4.
BM63SPKA1MGA Table 7: Transmitter section for BDR (25℃) Typ Max Bluetooth specification Unit Maximum RF transmit power 2.0* 5.0 -6 to 4 dBm RF power variation over temperature range with compensation disabled ±2.0 Min RF power control range ≥16 18 RF power range control resolution ±0.
BM63SPKA1MGA Table 8 Transmitter section for EDR (25℃) Min Relative transmit power π/4 DQPSK max carrier frequency stability 8DPSK max carrier frequency stability Typ Max -1.2 Bluetooth specification Unit -4 to 1 dB |ωo| freq. error 2.5 5 ≤10 for all blocks KHz |ωi| initial freq. error 2.5 5 ≤75 for all blocks KHz 5 10 ≤75 for all blocks KHz |ωo| freq. error 2.5 5 ≤10 for all blocks KHz |ωi| initial freq. error 2.5 5 ≤75 for all blocks KHz 5 10 ≤75 for all blocks KHz 12.
BM63SPKA1MGA Table 9 Receiver section for BDR (25℃) Frequency (GHz) Sensitivity at 0.1% BER for all basic rate packet types Min Typ 2.402 -89 2.441 -89 2.480 -89 Max Bluetooth specification Unit ≤-70 dBm dBm Maximum received signal at 0.1% BER 0 ≥-20 Continuous power required to block Bluetooth reception (for input power of -67dBm with 0.1% BER) measured at the unbalanced port of the balun 0.030–2.000 -7 -10 2.000-2.400 -10 -27 2.500-3.000 -11 -27 dBm 3.000-12.
BM63SPKA1MGA Table 10: Receiver section for EDR (25℃) Sensitivity at 0.01% BER Frequency (GHz) Modulation 2.402 π/4 DQPSK -90 2.441 π/4 DQPSK -90 2.480 π/4 DQPSK -90 2.402 8DPSK -83 2.441 8DPSK -83 2.480 8DPSK -82 π/4 DQPSK -10 ≥-20 8DPSK -10 ≥-20 π/4 DQPSK 10 ≤13 dB 8DPSK 16 ≤21 dB π/4 DQPSK -11 ≤0 dB 8DPSK -5 ≤5 dB π/4 DQPSK -8 ≤0 dB 8DPSK -4 ≤5 dB π/4 DQPSK -38.5 ≤-30 dB 8DPSK -33.5 ≤-25 dB π/4 DQPSK -29 ≤-7 dB 8DPSK -25 ≤0 dB -32.
BM63SPKA1MGA Reflow profile ISSC Confidential (Version: 1.
BM63SPKA1MGA QR code label information Label Size:15±1.5 *6±1.5 mm Device Name: BM63SPKA1MGA MAC ID: xxxxxxxxxx Customer ID Name: Cxxxxx Date Code: 13xx Module Weight (Test condition: module with QR label) TBD ISSC Confidential (Version: 1.
BM63SPKA1MGA Storage standard 1. Calculated shelf life in sealed bag: 12 months at < 40 ℃ and <90% relative humidity (RH) 2. After bag is opened, devices that will be subjected to reflow solder or other high temperature process must be Mounted within 168 hours of factory conditions <30℃/60% RH ISSC Confidential (Version: 1.
BM63SPKA1MGA Ordering Information Module Device Size Shipment Method 32*15 mm2 Tray Order Number BM63SPKA1MGA Bluetooth 3.0 digital audio Module Note: Minimum Order Quantity is 630pcs Tray. ISSC Confidential (Version: 1.
BM63SPKA1MGA Packing Information Tray Dimensions Packing Method ISSC Confidential (Version: 1.
BM63SPKA1MGA Inner box: Q’ty (630 Pcs) Dimensions: 36*16*9.5 cm Bar Code Label P/N: Device name C/N: Customer name Lot No: Lot ID Q’ty: Box or Carton Module’s Q’ty Carton: Q’ty (3780 Pcs) Dimensions: 38*35*30 cm ISSC Confidential (Version: 1.
1. BM63 module contain PCB antenna 2. The gain of PCB antenna is 2.4dBi 1. Every module has 48 pin 2. Fix BT module on main board by its 8 pin 3. Every pin is fixed on the main board by tin 1.Main board plug in the plastic enclose inside.
FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. IC statement This device complies with Industry Canada licence-exempt RSS standard(s).