3T TABLET QUICK START GUIDE BC CJB1NL0LZAAA CJB1NLOLZAAA
Device Overview....................................................... 1 SIM Card.................................................................... 3 Battery........................................................................ 4 Power......................................................................... 5 Home Screen............................................................ 6 Applications.............................................................. 7 Accessing Files...............................
Software updates...................................................15 Firmware Versions.................................................16 Additional Information ..........................................16 Disclaimer...............................................................
Device Overview Micro USB Headset Connector Microphone Infrared Front Camera 1
Rear Camera Power Key Volume Keys SIM/SD slot Speaker 2
SIM Card The SIM (Subscriber Identity Module) card identifies your device to the wireless network. A SIM card or Wi-Fi connection is required to browse the Internet. You don't need to power off your device before inserting or removing the SIM card. Note: Your device only supports MicroSIM cards. To avoid damage to your device, do not attempt to insert other SIM types, such as Standard and Nano SIM cards. Insert/Remove the MicroSIM and MicroSD Cards 1. Open the slot. 2.
Note: MicroSD Cards are sold separately Battery To optimize battery performance, be sure to fully charge your device before using it for the first time. • The back cover and battery are not removable. Disassembling the device may damage your battery. Charging the device 1. Insert the small end of the charging cable into the charge port as shown. 2. Connect charger to power outlet Note: Please use the cable that came with your device.
Adjusting brightness level: Lowering your screen brightness level can optimize your battery level. To adjust the brightness level, from the Home screen, touch > Settings > Display > Brightness level. To lower the brightness level, move the wheel to the left. 2. Power Saving Mode: Power Saving mode minimizes battery usage to extend battery life. To turn on your Power Saving mode, from the Home screen, touch > Settings > Battery. Then, turn on the Standby intelligent power saving and the Battery saver. 1.
folders and widgets) you love or use most frequently to your Home screen for quick access. Touch the Home key to get instant access to the Home screen. Status bar • Touch and drag down to open the notifications panel. Search bar • Touch to enter text search screen. • Touch to enter voice search screen. Favorite applications tray • T ouch to enter the applications. • Touch and hold to move or change applications.
Icon Status Bluetooth® active Wi-Fi® active Network (full signal) Network (roaming) 4G LTE data service 3G data service Airplane mode Alarm set Battery (charging) Battery (fully charged) New SMS message Applications App List Press the Application access the App list.
Add/Remove Application 1. Add: You can touch and hold a folder, an application, or a widget to activate the Move mode and drag the item to any Home screen you prefer. 2. Reposition: Touch and hold the item to be repositioned to activate the Move mode, drag the item to the desired position and then release. You can move items both on the Home screen and the Favorite tray. Hold the icon on the left or right edge of the screen to drag the item to another Home screen. 3.
items (shortcuts or applications) on the Home screen, you can create a folder by stacking one app on top of another. To rename a folder, open it and touch the folder’s title bar to input the new name. 5. Wallpaper customization: se either of these methods to change your U wallpaper: 1. Touch and hold an empty area on the Home screen and then select WALLPAPERS from bottom options.
2. If you use MTP or PTP, your device will be automatically connected. Note: Before using MTP, make sure that the driver (Windows Media Player 11 or higher version) has been installed. To locate data you have transferred or downloaded to your microSD card/internal storage: • Touch to open the applications list. • Touch Files Go . All data you have downloaded is stored in Files Go. Here you can view media files (videos, images, audio and others), install applications to your device, etc.
Volume & sound Adjust Sound and Volume From the Home screen, press Application and select Settings, then select Sound. 2. Position the slider to adjust volume for Media, Alarm, or Notification, separately. 3. Set sound for Device, Notification and Alarm separately. 4. Touch a named switch to turn its sound on or off 1. Contacts Create a New Contact From the Home screen, touch Application , and select Contacts . 2. Touch to create a new contact. 3. Enter contact’s name and other contact information. 4.
Messaging Use the messaging feature to send and receive text (SMS) and multimedia (MMS) messages. Create and Send a Message 1. From the Home screen, touch > Messaging to enter . 2. Touch to write text messages. 3. Enter the phone number of the recipient in the bar at the top of the page or touch to add recipients. 4. Press the Type message bar to enter the text of the message. 5. Press to send text messages. An SMS message of more than 160 characters will be charged as several SMS.
attached or subject or email addresses are added. To send a multimedia message, enter the recipient’s phone number in the To bar and touch the Type message bar to enter the text of the message. Touch to attach a picture, video, audio, and so on. When finished, touch message. to send the multimedia Note: Data must be turned on to successfully send MMS messages. Web Browser From the Home screen, touch > Chrome . A web browser with which you can surf the Internet.
2. Touch the switch for Bluetooth to activate this function. 4. The device will automatically search for compatible devices within range. 5. Select the desired Bluetooth device to pair with your device. Help Protect Your Device To help prevent others from using your device without your permission, activate the following security options: From the Home screen, touch > Settings > Security & location > Device security 1. Screen lock • None: Touch to disable screen unlock security.
3. Encrypt tablet This function can encrypt your accounts, settings, downloaded apps and their data and other files. After you encrypt your tablet, you need to unlock the screen to decrypt the tablet every time you power it on. Note: Encrypting tablet will take a while to complete. If you interrupt it, you may lose some or all of your data. Software updates To access Software Updates, follow these steps: 1. Connect your device to a Wi-Fi network and make sure it has a strong data connection 2.
Firmware Versions This device will only operate with firmware versions that have been approved for use by the device manufacturer. If unauthorized firmware is placed on the device, it will not function. Additional Information Use of some content or features may require qualifying service, or access to a Wi-Fi connection. Mobile HotSpot: Qualifying service required. Plan data allotment applies. Roaming and on-network data allotments differ; see your selected service for details.
Disclaimer There may be certain differences between the user manual description and the device’s operation, depending on the software release of your device or specific operator services. This device may contain materials, including applications and software in executable or source code form, which is submitted by third parties for inclusion in this device (“Third Party Materials”).
18
