English Manual MP-76
Important safety instructions 1 EMC/EMI 2 Explanation of graphic symbols 2 About this manual 3 Introduction 3 Setup 4 Using MP-76 with … VoiceLive 3 6 VoiceLive Touch 2 7 VoiceSolo FX150 8 Play Series product 9 Technical specifications 10 Getting support 10 Product Product (firmware) version Document Document version / date MP-76 English Manual – 2015-01-20 MP-76 1.
Important safety instructions Important safety instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Explanation of graphic symbols EMC/EMI Electromagnetic compatibility/ Electromagnetic interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations.
Introduction About this manual Introduction This manual will teach you everything you need to know about your new MP-76 Modern Performance Microphone with Mic Control. Thank you for purchasing a TC-Helicon MP-76 multi-switch microphone! This manual is only available as a PDF download from the TC-Helicon website. We’re super excited to be able to bring you such amazing control over vocal presets, effects and looping.
Setup Setup Ready… Set… ►►Connect your MP-76 to the next device in the signal chain using an XLR cable. The MP-76 box should contain the following items: ►►You’re done! ►►1 MP-76 microphone ►►1 Microphone clip ►►1 Carrying case Cable recommendations Inspect all items for signs of transit damage. In the unlikely event of transit damage, inform the carrier and supplier. If damage has occurred, keep all packaging as it can be used as evidence of excessive handling force.
Setup Using Mic Control MP-76 LCD Mic Control™ is a patented technology invented by TC-Helicon. As a Mic Control-enabled microphone, MP-76 allows you to use and control TCHelicon’s studio quality vocal processing from anywhere on stage. On most supported products, the MP-76’s LCD will show the preset number currently selected on the device. Mic Control has to be enabled via a switch or menu item on your TC-Helicon product. The exact procedure depends on the product you have.
Using MP-76 with your VoiceLive 3 Using MP-76 with your VoiceLive 3 To select what your MP-76 buttons do: Make sure your VoiceLive 3 is running the newest firmware version. Use VoiceSupport software to update your device’s firmware. You can download VoiceSupport here: tc-helicon.com/products/voicesupport/ To enable Mic Control on VoiceLive 3 for your MP-76: ►►Press SETUP. ►►Navigate to the INPUT tab using the < or > arrow buttons. ►►Select the INPUT TYPE parameter using the Large Control Knob.
Using MP-76 with your VoiceLive Touch 2 Using MP-76 with your VoiceLive Touch 2 To select what your MP-76 buttons do: Make sure your VoiceLive Touch 2 is running the newest firmware version. Use VoiceSupport software to update your device’s firmware. You can download VoiceSupport here: tc-helicon.com/products/voicesupport/ To enable Mic Control on VoiceLive Touch 2 for your MP-76: ►►Press SETUP. ►►Navigate to the INPUT tab using the < or > arrow buttons on the SliderFX bar.
Using MP-76 with your VoiceSolo FX150 Using MP-76 with your VoiceSolo FX150 MP-76 LCD and VoiceSolo FX150 Make sure your VoiceSolo FX150 is running the newest firmware version. Use VoiceSupport software to update your device’s firmware. You can download VoiceSupport here: tc-helicon.com/products/voicesupport/ On most supported products, the MP-76’s LCD will show the preset number currently selected on the device. Since VoiceSolo FX150 has no presets, the display will shows the level of Channel 2 instead.
Using MP-76 with your Play Series product Using MP-76 with your Play Series product To select what your MP-76 buttons do: To enable Mic Control on your Play Acoustic, Play Electric or VoiceLive Play for your MP-76: ►►Press SETUP. ►►Navigate to the INPUT tab using the < or > arrow buttons. ►►Select the MIC TYPE parameter using the “soft button” next to it. ►►Change the INPUT TYPE to MP-76 using the Control Knob. ►►Press SETUP. ►►Navigate to the MIC CONTROL tab using the < or > arrow buttons.
Getting support Technical specifications Getting support ►►Element type: Dynamic ►►Pickup pattern: Super-cardioid ►►Impedance: 300 Ohms ►►Sensitivity: -54 dBV/Pa (1.99 mV) – 1 Pa If you still have questions about the product after reading this manual and the FAQ page, please get in touch with TC-Helicon Support: = 94 dB SPL measured @ 1 kHz tc-helicon.com/support/ ►►Frequency response: 50 Hz to 18 kHz ►►Weight: 0.63 lb. / 290 g ►►Dimensions ►►Height: 7.
MP-76 English Manual – 2015-01-20 11
