Quick Start Guide

GO GUITAR

Portable Guitar Interface for Mobile Devices

Plug the attached cable into your device’s

headphone input or lightning adapter.

Plug a pair of headphones into the

headphone input.

Connect a guitar or bass via an instrument

cable with a ¼" TS plug.

Connect an amplier to the amp output via an

instrument cable with a ¼” TS connector.

Move the THRU/FX switch to the FX position to

hear the processed guitar or bass sound from

the app in your mobile device.

While playing your guitar or bass, turn up the

GAIN wheel until you get the optimum input level

for the app in your mobile device.

Download your favorite TC Helicon app to

begin experimenting with guitar and bass eects.

Left

Right

Ground

Mic

Quick Start Guide

Getting started

PAGE 1
Quick Start Guide GO GUITAR Portable Guitar Interface for Mobile Devices Getting started Plug the attached cable into your device’s headphone input or lightning adapter. Plug a pair of headphones into the headphone input. Move the THRU/FX switch to the FX position to hear the processed guitar or bass sound from the app in your mobile device. Connect a guitar or bass via an instrument cable with a 1/4" TS plug.
PAGE 2
Specifications Analog Connections Guitar 1 x 1/4" TS mono, unbalanced Impedance 400 kΩ Headphones 1 x 1/8" TRS stereo Amplifier out 1 x 1/4" TS mono, unbalanced FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION TC Helicon GO GUITAR Controls Gain 0 to +16 dB, adjustable Routing Thru / FX, switchable System Frequency response 20 Hz to 20 kHz, +0/-2 dB Dynamic range > 100 dB S/N ratio > 88 dB Dimensions / Weight Dimensions (H x W x D) 92 x 45 x 27 mm (3.6 x 1.8 x 1.