Quick Start Guide

Quick Start Guide
SKYSURFER MINI REVERB
Studio-Quality Reverb with 3 Award-Winning TC Electronic Algorithms in a
Compact Footprint
V 1.0
(1)
(4) (6)
(7)
(9)
(5)
(2) (3)
(8)
1. OUT – Send the signal to other pedals or a guitar
amp via ¼" cable.
2. 9 V DC – Connect a standard 9 V power supply
(not included).
3. IN – Connect your guitar via ¼" cable.
4. REVERB – Adjusts the length of reverb decay.
5. LED – Lights when the pedal is engaged.
6. MIX – Adjusts the wet/dry mix such that turning
clockwise results in more reverb.
7. TYPE – Selects reverb model type – Spring, Plate
or Hall.
8. TONE – Adjusts the brightness of the reverb.
9. FOOTSWITCH – Press to engage or bypass
the pedal. True bypass leaves the guitar signal
completely unaected whenever the pedal is
not engaged.
Specications
Connectors
Input ¼" TS, unbalanced
Impedance >350 kΩ
Output ¼" TS, unbalanced
Power input
Standard 9 V DC, center neg,
100 mA
Physical
Dimensions
99 x 57 x 56 mm
(3.9 x 2.2 x 2.2")
Weight 0.29 kg (0.64 lbs)