Tablet PC System TTAB910 User Guide
Tablet PC Desktop Start Button System Tray Taskbar Control Panel Views You can view the Control Panel in 2 views, Category and Classic. appropriate for you, follow the steps below. To select the view most 1 Ϥ Go to Start > Control Panel.
2 Ϥ Tablet PC Appearance To increase your Tablet PC visual friendliness, you may change its color scheme, and increase its font size and icon size. Follow the steps below.
Table of Contents Chapter 1 Introducing the Tablet PC Product Overview Safety Information Inventory Checklist Chapter 2 Seeing the Tablet PC Different types of Tablet Front View of the Tablet Back View of the Tablet Topside View of the Tablet Bottom Side View of the Tablet Right Side View of the Tablet Chapter 3 Setting up the Tablet PC Charging Tablet PC Battery Using Stylus Turning On/Off the Tablet Putting the Tablet in Standby Mode Changing New Battery (Hot Swap Time Process) Calibrating Screen for
Button Functions When Desktop Icons Appear Button Configuration Chapter 5 Protecting the Tablet PC Cleaning the Screen Chapter 6 Troubleshooting Useful Tutorials Help and Support Hardware Problems and Solutions Before Contacting COMPANY Contact COMPANY Appendix Safety Notices Limited Warranty Regulatory Compliance Copyright Notice
Chapter 1 Introducing the Tablet PC Product Overview Tablet PC combines the versatility of a pen and tablet with the functionality of a laptop to bring you a truly mobile tool for your work and personal use. This lightweight, page-size PC gives you easy access for retrieving and entering information using the latest Widows-based applications. Congratulations on your new purchase! Now, you may start enjoying a few of the vast amount of benefits Tablet PC has to offer you right away.
Safety Information Be aware of the following 2 symbols used in this user manual. Each symbol denotes important and helpful information that will benefit you while using the computer. Warning! This symbol informs you that improper use of equipment or failure to follow instructions may cause property damage or bodily injury. * Note! This symbol offers advice that helps you to take full advantage of the Tablet PC.
Warning! Avoid putting heavy objects on the screen and any PC wire parts. Warning! Avoid operating the PC in outdoor environments of extreme cold, dampness and wetness.
Inventory Checklist * Note! Your content items may vary depending on purchase.
Chapter 2 Seeing the Tablet PC Different Types of Tablet PC Section for briefly explain the different types of tablet pc & the important features of each type. Include a front view picture for each type.
Chapter 3 Setting up the Tablet PC Charging Tablet PC Battery Before you can use the Tablet PC for the 1st time, you need to charge its empty battery for at least 4 hours with the Power OFF to reach its maximum battery energy. The illustration below shows you the setup process. 1 Ϥ 2 Ϥ Begin with Tablet PC & its 4-cell Lithium Battery Pack unattached. Unlock battery switch by pushing it downward. At the same time, insert battery pack into the slot. 3 Ϥ Release battery switch to lock it.
The 4-cell Lithium Ion battery pack has 3.5 maximum hours of source life. battery life may vary depending on your Tablet PC usage. However, Your battery charging times differ depending on whether the power is ON/OFF and the current system state. See the table below for a list of battery charging times for different system states.
The scenario to the left appears when you initiate right-clicking function. * Note! You can customize pen actions. Settings > Pen Options. * Note! You can also access Tablet and Pen Settings in the system tray. Go to Start > Control Panel > Tablet and Pen Tap Turning On/Off the Tablet You can turn on the Tablet PC by pressing the power button located as shown below.
for more than 4 seconds with your stylus. 3 Ϥ Or you can set the Tablet to automatically display when pressing the power button once. This way you can easily make the selection on the screen. To change the power button setting, go to Start > Control Panel > Power Options > Advanced. Putting the Tablet in Standby Mode You have 2 methods to place the Tablet PC in standby mode. 1 Ϥ This is the default setting where you press the power button for less than 4 seconds.
Changing New Battery (Hot Swap Time Process) When the battery light starts flashing and you need to change the battery in order to save your work, follow the steps below. 1. 2. 3. 4. 5. Unplug everything from the system. (For example, unplug the VGA cable.) Place the system in standby mode. Take the battery off. Attach a new battery. Return the system to operating mode. Attach the new battery within 5 minutes or else any unsaved work will be lost.
Calibrating Screen for Stylus Accuracy You can make your Tablet PC screen respond better to your stylus. You need to select the type of screen orientation you wish to calibrate: Landscape or portrait. Go to Start > Control Panel > Tablet and Pen Settings > Settings. 1. Select the appropriate screen orientation to calibrate: Landscape or portrait. 2. Now, you are ready to calibrate the screen. Tap the Calibrate… box.
There are 2 methods to adjust the screen brightness. 1 Ϥ You can make the adjustment at Start > Control Panel > Tablet and Pen Settings > Display. Or you can simply double-tap (single-tap) on the Change Tablet and Pen Settings in the system tray to open up the Tablet and Pen Settings (Properties) window. Selecting Screen Orientation There are 4 different screen orientations.
You have 2 ways to select your screen orientation. 1 Ϥ Go to Start > Control Panel > Tablet and Pen Settings > Display 2 Ϥ You use your stylus to press the screen rotational button to alter you screen display. The default screen orientation sequence rotates in the clockwise order starting at Primary Landscape.
You can also set the sequence in which screen orientations change from one display to another in Tablet and Pen Settings > Display > Sequence…Change.
Projecting Materials on Screen During presentations or group meetings, you may need to project materials on a bigger screen for everyone to see easily. How do you do it? You can make the changes through either the Control Panel or Intel(R) Graphics Technology in the system tray. The system automatically sets the screen to display on Notebook, the PC screen itself.
Chapter 4 Defining the Tablet PC Function Keys Introducing PC Button Functions You have access to thirteen buttons all with different functions to make your computing life easier than ever. Some of these buttons even have secondary functions to save you the time you would take to look for them. You can even define four of these thirteen buttons to do additional tasks to meet your special needs. Working with the convenience of paper and digital pen together with the power of a PC is within your reach.
functions, you need to press the function Fn key first before pressing the button keys that have secondary functions. Button Functions in the Logon Process What is the Logon Process? It occurs when you first turn on the computer, before the desktop icons and the taskbar appear on the monitor. If you set password security, Login screen appears during this process asking for you to sign in for the security check.
Escape Key works as the backspace key. Enter Key functions as the spacebar. Up Arrow Key. As the icon indicates, it moves things upward. Down Arrow Key functions as the down arrow key on a keyboard. Button Functions When Desktop Icons Appear When do these functions occur? When the Logon process ends, the appearing of the desktop icons indicates the start of another set of functions differ from the ones described above as Logon Functions.
Enter Key functions as the enter key. Tablet PC Input Panel launches the Input Panel. Journal Key launches the Windows Journal application. Start Menu Key activates the Start Menu. Windows Security Key initiates the Windows Task Manager. It performs the same task as Ctrl + Alt +Del. * Note! You can also set the Power Button to put the PC in standby mode. “Putting the PC in Standby Mode” in Chapter 3.
Tablet PC Input Panel Key. Start Menu Key. * A user-definable button. A user-definable button. Note! User-definable button means you can assign a particular secondary function to it. How to Configure Buttons for Secondary Functions? You can only configure buttons in the system setting when the start task bar appears on the screen. You have one method to configure the four user-programmable buttons. These four buttons do not have secondary functions, only primary functions.
5. of the window Change Tablet Button Actions Select the desired secondary function from the Action scroll bar of 54 different choices. 6. Confirm your selection by tapping * Note! Hot1 Button stands for the Start Menu button. * Note! Of the 54 possible secondary functions you can select, Application 1 launches My Computer and Application 2 launches the Calculator. OK .
Chapter 5 Protecting the Tablet PC Cleaning the Screen You use the soft cleaning cloth for removing dusts and fingerprints on your Tablet PC screen.
Chapter 6 Troubleshooting Useful Tutorials For help with using the Microsoft Windows XP Tablet PC Edition, you can access its tutorials with your stylus designed especially to help you learn about the new features. See below for 2 methods of finding help to operate the Tablet PC software. 1 Ϥ This window appears on screen when system first turns on. It offers 4 types of tutorials to help you get familiarize with the system’s special features. 2 Ϥ Go to Start > All Programs.
You will learn the basics to start using the Tablet PC here. Help and Support You can learn more about your Tablet PC and seek answers to your questions from the Help and Support Center.
Before Contacting COMPANY Troubleshoot Your Tablet PC Before you contact COMPANY Technical Support regarding any technical issues, please first conduct the following initial checks: ϭʳ ϭʳ ϭʳ ϭʳ ϭʳ ϭʳ Remove all external devices Check the green light indicator on the AC Adapter to see if it’s lit Make sure all power cords are completely plugged into the power outlet and the PC Check the power light indicator to see if it’s on Tighten any loose cable connections Contact the product’s manufacturer first for p
You can find BIOS Rev and EC Rev information in the Setting Panel. To locate the Setting Panel, follow the steps below. PICTURE OF PC ILLUSTRATING STYLUS PRESSING THE POWER BUTTON 1. Turn on the Tablet PC. 2. Press the Esc key when COMPANY NAME logo appears on the screen. 3. Boot Menu appears on the screen. Use the arrow key to select the Setup Menu. 4. Locate and record BIOS & EC Rev information.
Appendix Safety Notices Battery Safety Notices i The battery pack is intended for use only with this device. i Do not disassemble the pack. i i Do not dispose of the battery pack in fire or water. To avoid risk of fire, burns, or damage to your battery pack, do not allow a metal object to touch the battery contacts. i Handle a damaged or leaking battery with extreme care. If you come in contact with the electrolyte, wash the exposed area with soap and water.
Regulatory Compliance Copyright Notice
Enjoy Freedom with Wireless Mini-PCI Module EM9-NB NeWeb’s WLAN line of 2.4Ghz 802.11b Wireless Networking Products include Wireless Access Points, Wireless USB Adapters and Wireless Compact Flash Type II Adapters for handheld PDAs and Pocket PCs. The WNC WLAN line also includes a full product set of integrated Access Points equipped with such features as built-in routing capabilities, fast Ethernet switching and print server functionality. IEEE 802.
Mini-PCI Module EM9-NB The Trendy Mobile Networking Solution Easy Integration into OEM Devices Made-to-Order Embedded Antenna Design Service Integration Support Software Compatibility Security Encryption Specifications Product name IEEE 802.11b mini-PCI wireless LAN Frequency range 2.4 ~ 2.4835GHz Modulation technique DSSS ( Direct Sequence Spread Spectrum) Host interface Mini-PCI spec. V1.
WISTRON / Mini PCI Module / EM9-NB IEE 802.
Regulatory Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Contents Regulatory Information ........................................................................................... 1 Table of Contents..................................................................................................................... 2 1. Quick Software Installation Guide ..................................................................................... 3 2. Step-by-Step Software Installation Guide .......................................................................
1. Quick Software Installation Guide If you are familiar with computer networking, this Quick Start Guide is the fastest way for you to establish your wireless network. If you need more information than this Quick Start Guide can provide, the following chapters will guide you through the necessary steps. The quick installation guide is based on Windows XP. 1. Insert the installation software CD into the computer. 2. Follow the displayed instructions to complete installation. 3.
4. Click Start>Settings>Network Connections, and double click the Wireless Network Connection of “802.11b Wireless LAN PCI Card”. From the available networks list, choose one network and enter the network key (if necessary). Click “Connect”. 5. From Windows System Tray, a dialog box pops up which shows you the Network name and the Signal Strength. 6. Double click on “Wireless Network Connection” icon from the Windows System Tray. 7. Click “Properties”.
8. Select “Wireless Networks” tab. 9. Click “Configure” button to view and edit the WEP settings. You may click “Learn about setting up wireless network configuration” on Wireless Networks tab to learn more about wireless network configuration.
2. Step-by-Step Software Installation Guide 2.1 Installation Under Windows XP 1. Insert the IEEE802.11b WLAN installation CD into your CD-ROM drive. The setup program will then automatically start. 2. Click ”Next”. 3. Click “Finish”.
2.2 Installation Under Windows 98SE/2000/ME 1. Insert the IEEE802.11b WLAN installation CD into your CD-ROM drive. The setup program will then automatically start. 2. Click ”Next”. 3. Click ”Next”. 4. Click “Yes” to create a shortcut.
5. Click “Yes” to auto start the IEEE802.11b MiniPCI Utility every time the computer starts. 6. The installation is complete. Click “Finish”. Restart your computer if necessary. 7. From the Windows System Tray, you can find a connection status icon. Three different colors indicate different connection status.
3. Software Uninstallation Guide 3.1 Uninstallation Under Windows XP 1. Close the IEEE802.11b MiniPCI Utility. 2. Click Start >Settings>Control Panel. 3. Select “Add or Remove Programs”.
4. Select “IEEE802.11b miniPCI Windows XP Driver”. “Change/Remove”. 5. Click “Yes”. 6. Click “OK”.
3.2 Uninstallation Under Windows 98SE/2000/ME 1. Close the IEEE802.11b MiniPCI Utility. 2. Click Start > Programs > IEEE802.11bMiniPCI Utility>Uninstall IEEE802.11b MiniPCI Driver & Utility. 3. Click “Yes”.
4. Configuration 4.1 Configuration Under Windows XP 1. Click “Start>Settings>Network Connections, and double click the Wireless Network Connection of “802.11b Wireless LAN PCI Card”. 2. From the available networks list, choose one network and enter the network key (if necessary). Click “Connect”. 3. From Windows System Tray, a dialog box pops up which shows you the Network name and the Signal Strength. 4. Double click on “Wireless Network Connection” icon from the Windows System Tray. 5.
In Wireless Network Properties, specify the wireless network key (Wired Equivalent Privacy) settings, or, if the network key is automatically provided for you (for example, the key is stored on the wireless network adapter given to you by your administrator), select the The key is provided for me automatically check box. If you are unsure about whether a network key is needed or which settings you need to enter, contact your network administrator or the wireless network adapter manufacturer.
7. To change the wireless network connection settings for a network that is listed in Preferred networks, click the wireless network for which you want to change settings, click Properties, and then change the settings as needed. 8. To remove a wireless network from the list of preferred networks, under Preferred networks, click the wireless network that you want to remove, and then click Remove. 9. To update the list of available networks that are within range of your computer, click Refresh. 10.
network to a position in the list that is higher than the position of an access point network. • To provide enhanced security for 802.11 wireless networks and for wired Ethernet networks, IEEE 802.1x authentication is enabled by default. For more information about how to set up 802.1x authentication, see Related Topics.
4.2 Configuration Under Windows 98SE/2000/ME 1. Click the connection status in Windows System Tray. Select “Site Survey” tab. 2. From the available network list, you can check the Signal Strength and then decide which network to join. 3. Select “Setting” tab. Enter the SSID and then choose the Network Type. Choose a channel if 802.11 AdHoc mode is selected. 4. Click “Advance” button to set Transmission Rate, Power Saving and WEP. Click “Apply”. 5. Click “Apply” to implement the modified settings.
Encryption Function You may enhance the security of your network by enabling the “Encryption” function. The WEP Required Mode enables you to define the encryption keys. ! Caution: Using “Encryption” function requires all computers of the network to enable the “Encryption” function. The WEP key needs to be the same for all IEEE802.11b stations. Follow the steps below to set your WEP Required Mode: (1) Select one mode by clicking the pull-down button in the WEP Required Mode frame.
A. ASCII 64 bits: This mode requires 5 ASCII characters range from 0~9 and a(A)~z(Z). B. ASCII 128 bits: This mode needs 13 ASCII characters range from 0~9 and a(A)~z(Z).
C. Hex 64 bits: This mode needs 10 hexadecimal numbers for use and will have the limit of 10 Hexadecimal value of 0~9 and a(A)~f(F). D. Hex 128 bits: This mode needs 26 hexadecimal value for use and will have the limit of 26 Hexadecimal number from range of 0~9 and a(A)~f(F).
5. Using IEEE802.11b WLAN Utility 5.1 LAN Status If you want to know the connecting status in Infrastructure Mode or 802.11Ad Hoc Mode, choose LAN Status tab in IEEE802.11b WLAN Utility window. 1. Infrastructure Mode: The columns of SSID and MAC of the Access Point, which your computer connects to, will appear in the screen if you choose the Infrastructure Mode.
5.2 Link Information The link information provides information of Current Channel, Current Transmission Rate, Own MAC Address, Current Connection State, Wireless Network Adapter IP Address, Wireless Network Adapter Subnet Mask, and Wireless Network Adapter Default Gateway. 5.3 Site Survey In this dialog box, you may get all the information of each Access Point within the communication range of your MiniPCI module.
5.4 Diagnostic To check if there are any errors in the hardware, firmware, and software of your PCI module, you may enter this dialog box and click the “Start Diagnostic” button. If there are any errors, please click the “View Error Details” and print it out to present to your dealer/ distributor. 5.5 About From this dialog box, you can get the details such as the version information of each Software component.
6. Networking Applications Available network applications are as follows: To Survey the network neighborhood To Share Your Folder with Your Network Member(s) To Share Your Printer with Your Network Member(s) To Access the Shared Folder(s)/File(s) of Your Network Members(s) To Use the Shared Printer(s) of Your Network Member(s) In fact, the network applications of IEEE802.11b MiniPCI are the same as they are in a wired network environment.
6.2 File Sharing You may share files between computers that are logged onto the same wireless network. For example, if you want to share your folder “My Documents“ with other computers of the wireless network, please highlight the folder “My Documents” and drag it to Shared Documents folder. Sharing files in the IEEE802.11b wireless network will be like sharing files on a wired LAN.
6.3 Using the Shared Folder If you would like to access a shared folder stored in other stations of the same network, please follow the process below: 1. Double-click the “My Network Places” icon, and then double-click the computer where the shared folder is located. 2. Double-click the folder you want to connect to. 3. Now you may open the needed file(s). Note: If a password is required, the Windows will prompt a password column to you.
