ROS 1000 (005-01004)
© COPYRIGHT 2006-2008 PRODEA SYSTEMS, INC. ALL RIGHTS RESERVED. PRODEA SYSTEMS CONFIDENTIAL INFORMATION AND TRADE SECRETS Contents Setup Hardware.............................................................................. 4 Standard DVD / Satellite Composite vDMA Setup............................. 8 High Definition Component vDMA Setup.......................................... 9 High Definition HDMI vDMA Setup................................................... 10 RHC LED Description......................
SETUP HARDWARE 1. Before you begin, make sure you have following equipment. IMPORTANT! If you have a modem - router combination, you need to turn on bridge mode. • Working high-speed Internet connection • Television • Activation code you received from your ROS service provider.
SETUP HARDWARE 2. Place for your ROS Home Center (ROS2000) next to your Internet modem (preferred location). Unplug power from your modem. Install your equipment in a clean, indoor environment where the temperature is between 32 and 104 degrees Fahrenheit (no attics or garages). Internet modem 3. Connect your ROS Home Center with your modem using the provided blue Ethernet cable and then supply power to your modem. Ethernet port 5. Using another Ethernet cable, connect your PC to the RHC. 4.
For Standard DVD or Cable / Satellite Boxes Composite Cables If your television or devices support only standard definition, complete the following steps to connect the ROS Set Top Box to your television using composite A/V cables. If your television supports high definition, see the following pages for installation instructions.
For High Defintion DVD and Cable / Satellite Boxes RHC LED DESCRIPTION HDMI Cables Connect your high definition devices to the ROS Set Top Box, and then the ROS Set Top Box to your TV using HDMI cables. High Definition Cable Box or DVD Player HDMI Cable RHC LED Description Color Red Description When first powered on, the LED is red during start up. If the LED is red after activation, check your Ethernet cabling. Amber (blinking) Indicates that the RHC is attempting activation.
vDMA LED DESCRIPTION Universal Remote Description vDMA LED Description Color Red Description The vDMA LED is red during start up; if it remains red, there is a service connectivity issue. Amber (flashing) vDMA is connected to the RHC but there is a service problem. Amber Attempting Wi-Fi Protected Setup (WPS). Green (flashing) vDMA is connecting to the RHC. Green vDMA is connected to the RHC and service is available. ROS Click to access your ROS Home Center. Widgets Access weather and more.
SAFETY AND NOTICES Important Safety Information FCC Regulatory Information Read and follow these instructions to use your products and services safely. • • • • • • • • • • • • • • • • • Read and keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Keep all devices, cabling, and accessories away from children.
SAFETY AND NOTICES The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance in order for you to make necessary modifications to maintain uninterrupted service. PÓLIZA DE GARANTÍA If trouble is experienced with this unit, for repair or warranty information, please contact customer service at the address and phone listed below.
WARRANTY This product is warranted by Prodea Systems against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from authorized Prodea Systems retailers. For complete warranty details and exclusions, see www.prodeasystems.com. © COPYRIGHT 2006-2008 PRODEA SYSTEMS, INC. ALL RIGHTS RESERVED. 6101 West Plano Parkway • Plano, TX 75093 • ProdeaSystems.com • 214.278.
