User's Manual

ManualsBrandsTatung ManualsElectronicsBench Top PC With 802.11 b/g WLAN

Quick Start Guide

Version 2: Online/Node

COVER:

Integrated Marketing Solutions

DS15- Node

Planar Logo/Tag: Display Innovation You Depend On

Quick Start Guide

1. Connect E-net cable

2. Connect power

3. Turn system on

INSIDE:

Quick Start Guide

Step 1: Connecting the System.

Connect the mounting bracket

1. A 75mm VESA KOK Mounting pattern is located on the back of the

monitorsystem

.. Attach left and right adjustable mounting bracket (not

included) with four (4) screws provided.

2. If necessary, clean the front surface of the display using clean, compressed air or

by using only a clean, dry, soft cloth.

3. Mount the (product name) to the wall using your hardware. Detailed mechanical

drawings, including mounting hole patterns, may be found at

www.planar.com/support

4. Securely tighten all mounting hardware.

2. Turning on power

1. Connect the cord attached to the power adapter to the back-bottom of your

system. Attach the power cord to the power adapter, and then plug the cord into

an active wall outlet, located approximately 1.5 meters from the unit.

Summary of content (5 pages)

PAGE 1
Quick Start Guide Version 2: Online/Node COVER: Integrated Marketing Solutions DS15- Node Planar Logo/Tag: Display Innovation You Depend On Quick Start Guide 1. Connect E-net cable 2. Connect power 3. Turn system on INSIDE: Quick Start Guide Step 1: Connecting the System. Connect the mounting bracket 1. A 75mm VESA KOK Mounting pattern is located on the back of the Attach left and right adjustable mounting bracket (not monitorsystem.. included) with four (4) screws provided. 2.
PAGE 2
. Attach Ethernet CAT5 cable. (Cable not provided). 3. Push “on” switch located on back of DS15- Node at top of unit. 4. Series of logos will appear on screen, as well as a “set local time” screen. your finger, set the time. Using 5. System is set to DHCPIP address 192.168.1.xxx. If DHCP server is on netware IP address will be assignedThe IP address can be changed via the Administrative Panel. The Administrative Panel is access by..
PAGE 3
DC in x 1 Line out Jack x 1 Internal covered connectors: USB2.0 non standard type x 4 for Expansion USB2.0 Type A x 1 for touch screen Expansion: USB type card reader USB type printer USB type Microscan Optical driver: Slim & slot in type optical driver User Indicators: Power On/Off HDD Access AC Power Adapter: 18.
PAGE 4
• • Pull on the power cord or power adapter, or damage the power cord insulation. Operate the product under the following conditions: o Extremely hot cold or humid environment. (See operating specifications) o Areas susceptible to excessive dust and dirt. o Near any appliance generating a strong magnetic field. o In direct sunlight. o In water Suggestion: DS15 is for business not for personal use. Operating Specifications: Electrical Rating: AC 100V-240V, DC 18.5V, 3.
PAGE 5
RF: EN 301 489-17:2002 EN:300 328-2:2001 FCC Warning statement: 15.105 Federal Communications Commission (FCC) Requirements, Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.