Basic Equipment IOT-3352 Gateway 2.
(Hardware Specification) Product Name A+ Processor AM3352 32-bit RISC, 600 MHz Memory and Storage Communication SDRAM Memory Flash Memory Wi-Fi Bluetooth (BT 4.0 BLE) 512M Bytes Samsung K4B4G1646E-BCK0 NAND Flash : 512M Bytes (MLC) MT29F4G08ABADAWP:D IEEE 802.
Software Specification Software specification Communication External I/O Firmware Wi-Fi IEEE 802.11 b/g/n (support AP / station mode ) Button Total 2 buttons: GPIO Software configurable LED Indicator Total 3LED indicators: 2 for blue color LED ; 1 for dual color – Red/ Blue (GPIO Software configurable ) USB USB 2.0 standard driver (USB1: Host port ; USB2: Device port) RJ45 Ethernet PHY Bluetooth (BT 4.
Outlook Wi-Fi indicator Power indicator Alert indicator Wi-Fi Reset Gateway Reset Dimension: 6.97”/177mm(W) x 1.46”/37mm(H) x 4.
按鍵與燈號(Button & LED Indicator): 按鍵與燈號 Button Function Gateway Reset Button Reset gateway Wi-Fi Reset Button Reset Wireless LED indicator Function Power Indicator (mono) Blue LED stays on after startup is complete Wi-Fi indicator (mono) Blue LED stays on after Wi-Fi is in AP and station mode Alert Indicator (dual) Gateway Alert: Red LED blink at 1Hz Wi-Fi alert: RED LED blink at 5Hz Function state: Blue LED stays on Tatung Confidential 5
Installation Connect the power adapter to the receptor on the rear panel of the DAP-1353 and then plug the other end of the power adapter to a wall outlet or power strip. The power LED will turn ON to indicate proper operation.
Appendix FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
