ANPR MOBILE Series Automatic Number Plate Recognition Original Instructions for Installation Document number: RMM_00029 Rev.09 Tattile srl - Via Gaetano Donizetti, 1 - 25030 Mairano (BS) Italy - Tel. +39 030 97000 - Fax. +39 030 97001 - info@tattile.
Table of Contents Contact: Tattile S.r.l. Via Donizetti 1 25030 Mairano– Brescia, Italy Ph. +39 030 97 000 Fax +39 030 97 001 http://www.tattile.com infotraffic@tattile.com http://www.tattile.com This publication is copyright protected Copyright © 2020 Tattile S.r.l.
Table of Contents Table of Contents 1 2 3 About this Document ........................................................................................................................... 6 1.1 Scope of this Document ................................................................................................................ 6 1.2 Who this Document is for.............................................................................................................. 6 1.3 Typographic Conventions ....
Table of Contents 5.7.3 6 7 8 9 F01696 Long distance reading ‐ patrolling ................................................................... 30 Troubleshooting and Support ............................................................................................................ 31 6.1 Troubleshooting .......................................................................................................................... 31 6.2 Support .............................................................
Table of Figures Table of Figures Figure 1: Figure 2: Figure 3: Figure 4: Figure 5: Figure 6: Figure 7: Figure 8: Figure 9: Figure 10: Figure 11: Figure 12: Figure 13: Figure 14: Figure 15: Figure 16: Figure 17: Figure 18: Figure 19: Figure 20: Figure 21: Figure 22: Figure 23: Figure 24: Figure 25: Figure 26: Hazard Distance evaluation.................................................................................................... 10 Tattile ANPR Mobile dimensions ......................................
1 About this Document 1 About this Document 1.1 Scope of this Document This document shows the user how to correctly install and set up the Automatic Number Plate Reader MOBILE Series. 1.2 Who this Document is for Table 1 summarizes the groups this document is aimed at, with a brief description of the type of information the manual must supply to help them understand the product. Readership group Description Aim Installer Technician responsible for product installation in the traffic application.
1 About this Document DANGER! Type and source of danger! (indicates an hazardous situation, that if not avoided, will result in death or serious injury)! Possible consequences (optional). Preventive measure. NOTICE! Type and source of danger! (used to address practices not related to physical injury)! Possible consequences (optional). Preventive measure. Useful suggestion or additional information. Preventive measure.
2 Precautions / Safety Instructions 2 Precautions / Safety Instructions 2.1 Safety Instructions Read and understand this manual prior to use the product. Misuse of the product may result in damages. Tattile is not responsible for any damage due to negligence in reading this manual. Mount the device on a mechanically stable structure. The camera shall be reachable only by maintenance operator.
2 Precautions / Safety Instructions Illuminator risk group and hazard distance evaluation F01710, F01845 IR illuminator lens 36° (wavelength 860nm, ±15nm spectral bandwidth @ 50% of max intensity) Ultraviolet hazard Retinal blue light hazard Retinal blue Cornea/lens Retinal thermal light or thermal infrared hazard hazard, weak hazard visual stimulus 200 ‐ 400 nm (Es/Euva) 300 ‐ 400 nm (Lb) 400 ‐ 780 nm (Lr) 780 ‐ 3000 nm (Eir) 780 ‐ 1400 nm (Lir) Risk Group Exempt Group Exempt Group Exempt Group
2 Precautions / Safety Instructions Figure 1: Hazard Distance evaluation 2.2 Intended Use of the Product The product is designed for automatic number plate recognition for the following applications: ‐ Police enforcement ‐ Crime prevention 2.3 Known or Foreseeable Misuse of the Product All other uses not included in the intended use of the product are considered as an improper use of the product.
3 General Characteristics 3 General Characteristics 3.1 Features Tattile ANPR Mobile is an embedded camera produced by Tattile for automatic license plate reading. ANPR Mobile is suitable for Police enforcement, crime prevention, patrol enforcement and everywhere a portable solution is required. It is equipped with Megapixel sensor, able to read license plate in all light conditions.
3 General Characteristics 3.2 Dimensions 3.2.1 Product Dimensions Figure 2 shows the overall view of the Tattile device, dimensions in millimeters.
3 General Characteristics 3.3 Physical Interface 3.3.
3 General Characteristics 3.3.2 Power Supply, Ethernet and strobe Connector The type of the power supply connector is: M16 8 Pole Male. Mating part included in the package.
3 General Characteristics Strobe Output Feature Description Type Optoisolated open collector Channels 1 Max voltage 24 Vdc + 10% Min voltage 3.
3 General Characteristics 3.4 Technical Sheet / Specifications General ANPR MOBILE Range Short Mono Medium Mono Long Mono Part Number F01710 F01845 F01696 Storage microSD card up to 32 GB Strobe Output 1 LAN Fast Ethernet 10/100 Wi‐Fi 802.
3 General Characteristics Electrical Characteristics Power supply Voltage Nominal 12 Vdc (Min. 8,4 ÷ Max. 16,8) *Minimum operating voltage for integrated illuminator is 10,5 Vdc Power consumption 15 W (@12 Vdc) Starting current 5A (max) Mechanical Dimension 178 x 141 x 76 mm (LxWxH) Camera weight 1,650 kg Housing Color Anodized Aluminum and Plastic Vibration ISO 16750‐3, test IV, Equipment mounted on vehicle body (at steady temp.
3 General Characteristics 3.
3 General Characteristics 3.6 Conformity – Compliance Tattile declares under sole responsibility that the products described in this manual are in conformity with the essential requirements of the following EU directives and standards: Compliance Description 2014/53/EU, RED Directive (1) The objectives and protection requirements of the Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU are applied under Directive 2014/53/EU, Article 3.1. Art 3.1a Safety specifications Art 3.
3 General Characteristics Compliance FCC Table 8: Description Tattile herewith declares that this product is in compliance with the following US Federal Regulation: FCC 47CFR part 15 US Federal Regulations, emission limit Class B Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device contains FCC ID: 2AULGT17950 This device complies with Part 15 of the FCC Rules.
4 Preparation and Installation 4 Preparation and Installation 4.1 Package Content The following products are included in the package: ANPR MOBILE Device. Mating parts kit, cod: T17493 For more information on the purchased device model refer to the Technical Specifications. 4.2 Building the Connector Cables Good equipment operation is guaranteed only by respecting the instructions contained in this manual.
4 Preparation and Installation 4.2.1 Cabling the Power Supply This chapter shows how to correctly build the cables for the power supply connector. This procedure is useful to cable the device to the power supply, look at the following design description. Figure 8: Assembly Connector instructions Ref Description 1 Assemble sealing rings (3x) 2 Bead cable parts 3 Dismantle cable and shielding braid. 4 Push single wires through housing.
4 Preparation and Installation 4.3 Mounting the Product NOTICE! Electromagnetic interference (EMI) and Electrostatic discharge (ESD) An installation environment with EMI and ESD can affect the quality of the data transmitted by the camera, or even cause the interruption of data transfer. Do not position cables parallel to wires carrying high‐current, switching voltages (e.g., electrical devices that employ switching technology).
5 Use 5 Use 5.1 Searching the Device This function allows the user to search for a device connected to the network. Tattile recommends the use of the freeware software tool Tattile Pathfinder to correctly search for a device into a network. The freeware software tool Tattile Pathfinder can be downloaded from Tattile website. For details, see chapter 5.2. This function is useful, for example, when the default IP address of the device has changed and the new IP address is no longer available.
5 Use 5.3 Modifying the IP Address of the Device This operation must be performed using the freeware software tool Tattile Pathfinder. This function allows the user to modify the IP address of the device. The function is useful, for example, when the host address of the device differs from the host of the Net interface. Tattile Pathfinder software tool is correctly installed. The device is correctly cabled to the network. 1. Turn on the device.
5 Use 5.5 What to Do When Starting the Device for the First Time First of all, fix the system in a secure way. Remove the transparent adhesive film from the device front. Now connect electrical cables and data cables, you can see par. 3.3.2 for schematics. To connect to the system you can have 2 options: wired network and wireless network. If you have a wired network system the default IP address is 192.168.0.21, while if you have a wireless network the IP address is 192.168.150.1. The subnet mask is 255.
5 Use Figure 10: Frame grabber setting If a license plate is in the camera field of view, and the plate distance is in accordance with the camera specifications, the license plate is automatically read. 5.6 Updating the Firmware Before updating the firmware of your device, contact your sales representative. The camera can be fully upgraded by uploading a package file. The Package file extensions for Tattile software upgrades is “gpg”.
5 Use 5.7 Types of use for Camera models Follow the instructions for your case. 5.7.1 F01710 Short distance reading - parallel parking Short distance devices are designed to read license plate everywhere the plate is very closed to the ANPR device. The typical application is the enforcement of parallel parking while driving in the lane aside the parked vehicles. Please refer to the drawing below to understand the application.
5 Use 5.7.2 F01845 Medium distance reading - curb side parking The typical application for medium distance devices is the enforcement of curb side parking or diagonal parking. The possible working conditions are: Minimum reading distance: 3 m Maximum reading distance: 7 m Install the ANPR system on the patrol car roof. The height (H) should be between 1,2m and 1,8m. Adjust the ANPR camera for having the license plate in the middle of the images when approximately at half range of reading interval.
5 Use 5.7.3 F01696 Long distance reading - patrolling The typical application for long distance devices is the enforcement over free roads and highways. The possible working conditions are: Minimum reading distance: 8 m Maximum reading distance: 15 m Others range of distances can be operated with proper lens selection. Install the ANPR system on the patrol car roof. The height (H) should be between 1,2m and 1,8m.
6 Troubleshooting and Support 6 Troubleshooting and Support 6.
7 Maintenance 7 Maintenance This chapter describes the required maintenance for the ANPR Mobile devices. If you install new electronic devices near the system, be careful the power cable of the system Will be away of any cable of the new electronic devices DANGER! IR radiation damage! The device emits invisible IR radiations. Never look directly into the infrared illuminator. NOTICE! Product malfunction! Never perform maintenance activity when the product is plugged to the power supply.
7 Maintenance Check the presence of humidity or water drops inside the connectors. In case of humidity or water drops, replace the seals. Clean the connectors. If necessary, build new connector cables.
8 Accessories 8 Accessories 8.1 Mating Parts Kit Order Code Description T17493 Mating parts kit (included in the package) 8.2 Magnetic Base Order Code Description T18481 MAGNETIC BASE FOR ANPR MOBILE Figure 14: Magnetic Base with safety belt (included in the package) Prior to purchasing the Magnetic Base, carefully read the instructions below 8.2.1 Important safety warnings The magnetic Magnetic Base must strictly be fitted only onto the rooftop’s flat surface area.
8 Accessories Before starting off on each trip, check to see that magnet positioning is steady and stable. The grip strength of the Magnetic Base is decisively strong, meaning that even when endeavouring to tug the Magnetic Base off the rooftop at full strength, it should neither budge nor detach in the slightest. Be sure to always test the grip firmness before every use and do not use the Magnetic Base when in doubt of its condition or performance.
8 Accessories 8.2.
8 Accessories In the event of protruding relief profiles, grooves or other non‐flat rooftop features, a Magnetic Base fitting trial must be conducted to ensure that the entire Magnetic Base surface perfectly grips onto the rooftop surface. Figure 188: Verify mounting roof Has the vehicles rooftop varnish finish be touched up (due to damage caused by hail, transport, etc.)? This may be possible even if your car is new! Use of repair filler materials (e.g.
8 Accessories Carry out the perfect grip test: if it is not possible to slip a sheet of paper in under the magnetic plate, the plate is assembled on correctly. Figure 200: Paper sheet test For safety reasons, the magnetic device must be fixed onto the car rooftop by means of the appropriate safety belt, as shown (per EC Directive 79/488). Slip the safety belt internally to the car and position the plastic stop device so that the buckle is as close up as possible to the car door.
8 Accessories 8.2.4 Disassembly You will note the magnetic plate has a disassembly knob. Figure 233: Dismantling of the Magnetic Base 8.2.5 Carefully lift the plate off by manually prising up its higher rise area. Clean as instructed in the “Maintenance Tips” section then store the Magnetic base adequate place so that it will not be damaged. Additional Directions Assemble the Magnetic Base only onto car rooftops.
8 Accessories The magnetic plate can damage magnet‐sensible elements, units or devices such as credit cards, wristwatches, electronic data books, discs, magnetic computer bands, video and audio devices. Leaving it assembled on will avoid dirt and snow deposits and the formation of ice and frost on the car roof surface. If the weather conditions were suddenly to change, the formation of frost and/or snow, twilight setting in, etc. might make reassembly of the Magnetic Base more difficult.
8 Accessories 8.2.7 Maintenance Directions Notwithstanding the implementation of rust prevention and antirust protection measures as well as synthetic weatherproof materials, the Magnetic Base do happen to be affected by winter use. For safety and maintenance of your Magnetic Base, clean at regular intervals only by hand, using car detergent diluted in warm water.
9 Revision History 9 Revision History Rev. Date Description 00 2014‐04‐04 First Release. S. Gustinelli I. Paderno P. Forti 01 2014‐10‐03 General updated of the document. Added reference to the code F01653 S. Gustinelli I. Paderno P. Forti 02 2015‐03‐18 Added codes F01622 and F01675 S. Gustinelli I. Paderno P. Forti 03 2016‐09‐13 Added codes F01696 and F01710 and “Angle of View” table F. Conti I. Paderno 04 2016‐12‐13 Housing table (pag.