Specification Sheet

ManualsBrandsTascam ManualsAccessoriesSERIES 8p Dyna 8 Channel Microphone Preamplifier with Analog Compressor

SERIES 8p Dyna

0102b -1-

Nov, 2019

Product Spec Sheet

MICROPHONE PREAMP

SERIES 8p Dyna

■ Specifications

Ratings

・Sampling frequencies

44.1, 48, 88.2, 96, 176.4, 192 kHz

・Quantization bit depth

24-bit

・Input channels

8 channels

・Analog output channels

8 channels

・OPTICAL OUT (S/MUX) output channels

8 channels S/MUX (44.1/48 kHz)

A: Channels 1-8

B: Channels 1-8

8 channels S/MUX2 (88.2/96 kHz)

A: Channels 1-4

B: Channels 5-8

4 channels S/MUX4 (176.4/192 kHz)

A: Channels 1-2

B: Channels 3-4

Analog audio input ratings

・Mic inputs (balanced)

Front panel 1–2 input jacks

(when the input switch is set to MIC/LINE)

Rear panel MIC/LINE INPUT 3-8 jacks

Connectors: XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)

Input impedance: 2.2 kΩ

Rated input level: -58 dBu (0.001 Vrms, GAIN knob at maximum)

-6 dBu (0.388 Vrms, GAIN knob at minimum)

Maximum input level: +10 dBu (2.45 Vrms)

Gain range: 52 dB

Summary of content (4 pages)

PAGE 1
SERIES 8p Dyna Nov, 2019 Product Spec Sheet MICROPHONE PREAMP SERIES 8p Dyna ■ Specifications Ratings ・Sampling frequencies 44.1, 48, 88.2, 96, 176.4, 192 kHz ・Quantization bit depth 24-bit ・Input channels 8 channels ・Analog output channels 8 channels ・OPTICAL OUT (S/MUX) output channels 8 channels S/MUX (44.1/48 kHz) A: Channels 1-8 B: Channels 1-8 8 channels S/MUX2 (88.2/96 kHz) A: Channels 1-4 B: Channels 5-8 4 channels S/MUX4 (176.
PAGE 2
SERIES 8p Dyna ・Instrument inputs (unbalanced) Front panel 1–2 input jacks (when the input switch is set Connectors: Input impedance: Rated input level: to INST) 6.3 mm (1/4”) standard TS jacks (Tip: HOT, Sleeve: GND) 900 kΩor higher -58 dBV (0.0012 Vrms, GAIN knob at maximum) -6 dBV (0.501 Vrms, GAIN knob at minimum) +10 dBV (3.
PAGE 3
SERIES 8p Dyna Terminal on/off switch ・WORD OUT connector Connector: Output voltage: Output impedance: Sampling frequencies: OUT/THRU switch BNC 2.0 Vpp (into 75 Ω) 75 Ω±10% 44.1, 48, 88.2, 96, 176.4 and 192 kHz Audio performance ・Mic amp EIN (equivalent input noise) -127 dBu or lower ・Analog input and output Frequency response MIC/LINE → LINE OUT 20 Hz - 40 kHz: ±0.5 dB (JEITA), 40 kHz - 80 kHz: ±5 dB (JEITA) S/N ratio 116 dB (MIC/LINE/INST to LINE OUT, GAIN knob at minimum, JEITA) Distortion 0.
PAGE 4
SERIES 8p Dyna ■ Dimensional drawings ____________________________________________________________________________________________________________________________________________________ ※TASCAM is trademark of TEAC CORPORATION, registered in the U.S. and other countries. ※Other company names, product names and logos are the trademarks or registered trademarks of their owners. ※Specifications and appearance are subject to change without notice.