User's Manual

(Confidentiality)
Model:AKB45
Brand name: 
Establishing the Connection:iPad,iPhone&allTabletPC
New Bluetooth Keyboard: Never paired with iPad, iPhone & all Tablet PC before
1. Switch on the Bluetooth keyboard. (Turn on the power by pushing the On/Off Switch to the right.), and the Blue LED
continue to blinking for 3 minutes, searching for device (ex. iPad, iPhone & all Tablet PC Air) into the auto pairing
mode
2. Start your iPad, iPhone & all Tablet PC’s Bluetooth set up function to search for this Bluetooth keyboard and enter
password.
Note: There won’t be any prompt, just click “ENTER” after you have entered password on the iPad, iPhone & all
Tablet PC.
4. The Bluetooth keyboard is now connected to your iPad, iPhone & all Tablet PC.
5. Auto pairing mode will keep 3 minutes, if unable to finish the pairing action within 3 minutes, Bluetooth keyboard will
into sleeping mold.
6. Two ways to weak up Bluetooth keyboard into pairing mold again:
A. Re-switch on Bluetooth keyboard.
B. Press “FN” + “Cap” two keys at the same time more than 3 second.
Bluetooth Keyboard paired already: Lost the connection with iPad, iPhone & all Tablet PC / Re-pairing with
another iPad, iPhone & all Tablet PC
Lost the connection with iPad, iPhone & all Tablet PC
1. Switch on the Bluetooth keyboard. (Turn on the power by pushing the On/Off Switch to the right.) , Bluetooth
keyboard into auto searching for previous iPad, iPhone & all Tablet PC for next 20 seconds.
2. If fail, Bluetooth keyboard will into sleeping mold.
4. Press any key to weak up Bluetooth keyboard into pairing mold, Blue LED will light all the time for 10 seconds.
Re-pairing with another iPad, iPhone & all Tablet PC
1. Press “FN” + “Caps” to re-pairing another iPad, iPhone & all Tablet PC
Charging the Bluetooth Keyboard
The Bluetooth Keyboard requires charging when the low battery Red LED keeps flashing.
1. Connect the keyboard with the USB charging cable, plug the other end into a power outlet.
2. The charging Red LED will remain lit until charging is finished.
3. Fully charged and under normal conditions, the keyboard provides 150 hours of battery life
Trouble Shooting Guide
• Make sure the bluetooth keyboard is fully charged.
• If the red LED starts blinking while the keyboard is in use, it is indicating a battery low status and it is time for