User Guide
Targus Multimedia Presentation Remote Introduction Thank you for your purchase of the Targus Multimedia Presentation Remote. This combination remote, with laser pointer and cursor control, works with both Microsoft PowerPoint® and Apple Keynote®. This cordless remote also offers true plug-n-play capability with no need for software drivers, whilst the long range 2.4 GHz technology allows for effective presentations up to 50 feet (15 m).
Targus Multimedia Presentation Remote Setting Up Your Remote Installing the Batteries Press the battery cover release button to open the battery cover and carefully lift the cover as shown. Battery Cover Battery cover release button Insert the supplied batteries, making sure the positive (+) and negative (-) ends of the batteries match the polarity indicators inside the battery compartment.
Targus Multimedia Presentation Remote NOTE: THE SPARE BATTERY COMPARTMENT PROVIDES CONVENIENT STORAGE FOR A SEPARATE BATTERY (INCLUDED) WHICH CAN BE USED FOR EMERGENCY POWER. Remove the mini USB receiver stored inside the center compartment. Slide the battery cover back into position until it “clicks” firmly into place.
Targus Multimedia Presentation Remote Using Your Remote Before using the remote, please select your computer type and preferred presentation software. Locate the switch inside the battery compartment as shown. PC PowerPoint® Mac KeyNote® Mac PowerPoint® NOTE: SELECT “PC POWERPOINT” IF YOU USE A COMPUTER MADE BY: HP/ COMPAQ, DELL, TOSHIBA, GATEWAY, PANASONIC, FUJITSU, SONY, IBM/ LENOVO, ACER, ASUS, ETC. This remote is a plug-n-play device.
Targus Multimedia Presentation Remote Turn on the remote by pressing and holding the on/off power button for 3 seconds.
Targus Multimedia Presentation Remote Keys and Functions This device can function as a presenter or a wireless mouse by using the mode switch (12). 12. 3. 2. 4. 5. 1. 8. 7. 6. 9. 10. 11. 1 Press and hold for 3 seconds to turn on the remote. LED ring will turn green. Power button Press and hold for 3 seconds to turn off the remote. LED ring will shut off.
Targus Multimedia Presentation Remote Using the device - Presenter mode 2 Blank screen button 3 Slide show 4 Page Forward/Next slide Press once to go to next slide. 5 Page Backward/Previous slide Press once to go back one slide. 6 Laser pointer 7 LED ring The screen will become blank/dark. Start - Press once to begin. 8 Stop - Press and hold for 2 seconds to stop the slide show. Laser light is emitted from the opening. Power and KeyLockTM indicator. Press once to enable KeyLock function.
Targus Multimedia Presentation Remote Using the device - Mouse mode 4 Right mouse click 5 Left mouse click 6 Joystick Moves the mouse cursor. 7 LED ring Power indicator. 8 KeyLock button 9 Joystick Right mouse click. Left mouse click. Disabled in mouse mode. Pressing the joystick resembles left mouse click. 10 Volume up button Press to increase the volume. 11 Volume down button Press to decrease the volume.
Targus Multimedia Presentation Remote Safety Measures • To avoid possible eye damage, never point the remote’s laser at people, especially their faces, or look directly into the remote’s laser beam. • Avoid pointing the remote’s laser beam at a mirror or other highly-reflective surface. • Keep the remote away from young children. • Never view the remote’s laser beam using telescopic devices, such as a microscope or binoculars.
Targus Multimedia Presentation Remote Technical Support For technical questions, please visit: US Australia New Zealand Internet: www.targus.com/support.asp Internet: www.targus.com/au Email: infoaust@targus.com Telephone: 1800-641-645 Telephone: 0800-633-222 Product Registration Targus recommends that you register your Targus accessory shortly after purchasing it. Go to: http://www.targus.com/registration.
Targus Multimedia Presentation Remote FCC Statement Tested to Comply This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Targus Multimedia Presentation Remote AVOID EXPOSURE--HAZARDOUS ELECTROMAGNETIC RADIATION EMITTED FROM THIS APERTURE. LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS 2 LASER PRODUCT. NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY, AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES.
410-1680-001A / AMP09US 1 YEAR LIMITED WARRANTY: We pride ourselves on the quality of our products. For complete warranty details and a list of our worldwide offices, please visit www.targus.com. Features and specifications are subject to change without notice. All trademarks and registered trademarks are the property of their respective owners. All rights reserved. ©2009 Manufactured or imported by Targus Group International, Inc. (for U.S.