User Guide
Targus Laser Presentation Remote Introduction Thank you for your purchase of the Targus Laser Presentation Remote. This combination remote with laser pointer, controls both Microsoft PowerPoint® and Apple Keynote®. This cordless remote also offers true plug-n-play capability with no need for software drivers, whilst long range 2.4 GHz technology allows for effective presentations up to 50 feet (15 m).
Targus Laser Presentation Remote Setting Up Your Remote Installing the Batteries Press the battery cover release button to open the battery cover and carefully lift the cover as shown. Battery Cover Battery cover release button Insert the supplied batteries, making sure the positive (+) and negative (-) ends of the batteries match the polarity indicators inside the battery compartment.
Targus Laser Presentation Remote NOTE: THE SPARE BATTERY COMPARTMENT PROVIDES CONVENIENT STORAGE FOR A SEPARATE BATTERY (INCLUDED) WHICH CAN BE USED FOR EMERGENCY POWER. Remove the mini USB receiver stored inside the center compartment. Slide the battery cover back into position until it “clicks” firmly into place.
Targus Laser Presentation Remote Using your remote Before using the remote, please select your computer type and preferred presentation software. Locate the switch inside the battery compartment as shown. PC PowerPoint® Mac KeyNote® Mac PowerPoint® NOTE: SELECT “PC POWERPOINT” IF YOU USE A COMPUTER MADE BY: HP/ COMPAQ, DELL, TOSHIBA, GATEWAY, PANASONIC, FUJITSU, SONY, IBM/ LENOVO, ACER, ASUS, ETC.
Targus Laser Presentation Remote This remote is a plug-n-play device. It will automatically operate when the USB receiver is connected to the computer. Plug the mini USB receiver into any available USB port on your computer. Turn on the remote by pressing and holding the on/off power button for 3 seconds.
Targus Laser Presentation Remote Keys and Functions 3. 2. 4. 5. 1. 8. 6. 7. 9. 10. 11.
Targus Laser Presentation Remote Press and hold for 3 seconds to turn on the remote.LED ring will turn green. 1 Power button 2 Blank screen button 3 Slide show 4 Page Forward/Next slide Press once to go to next slide. 5 Page Backward/Previous slide Press once to go back one slide. Press and hold for 3 seconds to turn off the remote.LED ring will shut off. The screen will become blank/dark. Start - Press once to begin. Stop - Press and hold for 2 seconds to stop the slide show.
Targus Laser Presentation Remote Safety Measures • To avoid possible eye damage, never point the remote’s laser at people, especially their faces, or look directly into the remote’s laser beam. • Avoid pointing the remote’s laser beam at a mirror or other highly-reflective surface. • Keep the remote away from young children. • Never view the remote’s laser beam using telescopic devices, such as a microscope or binoculars.
Targus Laser Presentation Remote Technical Support For technical questions, please visit: US Australia New Zealand Internet: www.targus.com/support.asp Internet: www.targus.com/au Email: infoaust@targus.com Telephone: 1800-641-645 Telephone: 0800-633-222 Product Registration Targus recommends that you register your Targus accessory shortly after purchasing it. Go to: http://www.targus.com/registration.
Targus Laser Presentation Remote AVOID EXPOSURE--HAZARDOUS ELECTROMAGNETIC RADIATION EMITTED FROM THIS APERTURE. LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS 2 LASER PRODUCT. NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY, AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES.
410-1681-001A / AMP13US 1 YEAR LIMITED WARRANTY: We pride ourselves on the quality of our products. For complete warranty details and a list of our worldwide offices, please visit www.targus.com. Features and specifications are subject to change without notice. All trademarks and registered trademarks are the property of their respective owners. All rights reserved. ©2009 Manufactured or imported by Targus Group International, Inc. (for U.S.