Voice Recording Presenter with Laser Pointer USER GUIDE Visit our Website at www.targus.com Features and specifications subject to change without notice. © 2006 Targus Group International, Inc. and Targus, Inc.
AVOID EXPOSURE--HAZARDOUS ELECTROMAGNETIC RADIATION EMITTED FROM THIS APERTURE. LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS 2 LASER PRODUCT. NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY, AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES. MOMENTARY EXPOSURE FROM A LASER POINTER, SUCH AS AN INADVERTENT SWEEP OF THE LIGHT ACROSS A PERSON'S EYES, MAY CAUSE TEMPORARY FLASH BLINDNESS SIMILAR TO THE EFFECT OF A CAMERA FLASH BULB.
TARGUS VOICE RECORDING PRESENTER WITH LASER POINTER Introduction Congratulations on your purchase of the Targus Voice Recording presenter with Laser Pointer. This user’s guide describes how to connect the presenter to your computer and its functions. This 2.4GHz presenter can work up to 50 ft (15m) of operating range and provides total control of your PowerPoint presentations with laser pointer, volume control, scroller wheel, dark screen button and application switch.
Targus Voice Recording presenter with Laser Pointer Using the presenter F A G H I J B C D K E L M O M P Q1 / Q2 N R A. Application Switch B. Next Page C. Laser Button D. Microphone (recording) E. Laser Pointer F. Targus Logo • Laser pointer indicator light: when light is on • Battery-low warning light: when LED flashes G. Dark Screen / Resume H. Slide Show / Esc I. Power Switch: L. Bulit-in SD Card Reader M. Connection Button N. USB Receiver O. Battery Compartment P.
Targus Voice Recording presenter with Laser Pointer Installing the Batteries • Before you start, please install the 2 AAA batteries (supplied). • Open the battery cover located on the back of the presenter and insert the batteries according to the correct polarities. • Replace the battery compartment cover. Note: It’s not recommended to use rechargeable batteries. For best performance use Alkaline batteries.
Targus Voice Recording presenter with Laser Pointer To Reconnect the Device and the Receiver 1. Position the Power Switch to “Presenter” mode to turn on the presenter. This presenter is a plug and play device and should work once the USB receiver is connected to and recognised by the computer. If the device is not working or you have recently replaced the batteries, you can try to reset the ID code between the receiver and the remote. To do this, do the following: 2.
Targus Voice Recording presenter with Laser Pointer Using the Voice recording function This presenter is equipped with a voice recording function. The recorded data is stored into the SD memory card. 1. Turn on the device. Press once and release the “voice record button” to start recording. The LED beneath the button will glow red when recording is in progress. 2. Press once and release the “voice record button” to end recording.
Targus Voice Recording presenter with Laser Pointer The voice data files are saved as .WAV format. You can copy the files to your computer or delete the files in the SD card. To retrieve or playback voice data file from the computer Once you have located the voice data file, the recorded data can be playback with audio programs that supports .WAV file format. (ie.
Targus Voice Recording presenter with Laser Pointer Technical Support For technical questions, please visit: US Australia New Zealand Internet: www.targus.com/support.asp Internet: www.targus.com.au Email: infoaust@targus.com Telephone: 1800-641-645 Telephone: 0800-633-222 Product Registration Targus recommends that you register your Targus accessory shortly after purchasing it. Go to: http://www.targus.com/registration.asp.
Targus Voice Recording presenter with Laser Pointer FCC Statement Tested to Comply This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.