MTR2018 Instruction Certification Document Title MTR2018 Instruction Certification Version N/A Author Bruce.
MTR2018 User Manual Document Title MTR2018 User Manual Version V1.00 Date 2019-05-21 Status Release Document Control ID QSZACCDR100UM0005 General Notes Targa Telematics offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Targa Telematics. The information provided is based upon requirements specifically provided to Targa Telematics by the customers.
MTR2018 User Manual Contents Contents ............................................................................................................................................ 3 Revision History ................................................................................................................................. 4 General Description .......................................................................................................................... 5 Product Specification .............
MTR2018 User Manual Revision History Revision Date Author Description of change 1.00 2016-12-01 Kevin Xiang Initial 1.
MTR2018 User Manual General Description MTR2018 adopts NXP Semiconductors MIFARE standard. Through RS232 communication, it can work along with other Queclink GVxxx Series products as an accessary. The red LED is for power supply indication and the green LED is for successful card reading indication. There is also a buzzer and it will alarm for each successful card reading. Moreover, MTR2018 can also be used as an accessary of other third-party devices so long as these devices support MIFARE standard.
MTR2018 User Manual 1.2 1.3 Electronic Condition NO TYPE SPECIFICATION Unit 1 Power Voltage（Vin） 8-32 V(DC) 2 Standby Current（Ista） 5 mA Vin=12VDC 3 Sleep Current（Isleep） 3 mA Vin=12VDC Enviroment Condition NO 1 1.4 TYPE SPECIFICATION Storage Temperature -20~+50 TYPE 1 Frequency 2 RF Output Power 3 Supported RF Standards and Transponders ℃ SPECIFICATION 13.56MHz /125kHz 13.56MHz:84.27dBμV/m@3m 125kHz:98.
MTR2018 User Manual 1.7 4Pin Input Interface MTR2018 02 Input Interface Connect To GVXXX Series Devices MTR2018 Input PIN PWR Colour Red Interface Description Connect to GV300N 8-32V input，Can be connected to the vehicle PIN11 PWR battery directly GND Black Ground PIN6 GND TXD_232 Blue RS232 level, receiver data, connect to TXD PIN5 TXD of GVXXX Devices RXD_232 Green RS232 level, Transmit data, connect to RXD PIN4 RXD of GVXXX Devices 1.
MTR2018 User Manual Interface Description PIN‐3.0mm Connector Interface PIN NO. PIN name Function Description 1 Serial TXD Used for configuration and firmware update 2 Serial RXD Used for configuration and firmware update 3 GND GND 4 PWR Primary Power 8‐32V FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
