Copyright 2022 TAQT SAS – All Rights Reserved.
Product presentation Front panel of the terminal E-ink screen Battery level 2 Front panel Error code For more information see page 5 Buttons Notch Badging Serial number Casing Screw Accessories NFC Tag x1 Back of the terminal Magnet Tag x1 Allen key 2.5 x1 Your package includes 1 NFC tag, 1 magnet tag and 1 Allen key. Variant of the terminal Targeted scoring Standard scoring 2 Copyright 2022 TAQT SAS – All Rights Reserved.
Installation 1 Meet at the place of installation We recommend to install the terminal : Close to the entrance of the building Close to a window or opening R O RI TE EX It is not recommended to install the terminal : In a blind, windowless room In basements, wardrobes In a building with very thick walls or metal sheet R IO R TE EX Once you are in the room that meets these conditions, move on to the next step.
Installation 3 Connectivity test Erreur reseau : Redemarrez la borne Network error : Reboot the device The screen displays an error message, proceed to restart the terminal see page 5. If the error message persists after the reboot restart, contact support. Enter the DC and S/N number in the paper table (at the end of the manual), written on the label, and its position in the building. This will be used to activate your terminals online.
Maintenance & Use Error code 1 Monday 20 april - 11:08 Monday 20 april - 09:33 Friday 17 april - 18:04 Friday 17 april - 12:15 Friday 17 april - 09:54 Thursday 16 april - 17:12 Error Code Legend : 1 - SIM error: Contact support 2 - Network error: Restart the terminal 3 - Clock error: Restart the terminal 4 - Server error: Restart the terminal Contact our support if the problem persists: +33 (0)1 80 91 98 67.
Standard tag Standard tag To record a check-in, push the button at the bottom left. Then place the NFC tag to the right of the button. The screen refreshes and displays the current date and time. Targeted tag Targeted tag To record a check-in, push the button corresponding to the intervention. E.g.: in, out, consumables, cleanliness etc. Then place the NFC tag directly on the the location indicated at the bottom of the terminal.
Maintenance: Changing the batteries and the front panel 1 2 ! K! AC CL Use the Allen key to remove the front panel of the terminal by inserting it into the notch above the screw. Pull the front panel down to remove it. To change the batteries or the front panel of the terminal, unscrew the screw at the bottom of the terminal using the 2.5 Allen key provided. 3 4 AA BATTERY ORDER The terminal contains 6 batteries in total, 3 on each side. The only reference accepted are "Energizer Ultimate" AA 1.
Different use cases in video Want to know more about our solutions ? Discover the different versions of the Taqt One and much more on video : Go to the link below : Scan me 8 Copyright 2022 TAQT SAS – All Rights Reserved. taqt.
Your terminals Enter your installed termninals in this table, to facilitate their registration on the Taqt platform. TAQT SAS with a capital of 24 724€ | N°CEE FR 54 534 232 558 Le Britannia - 20 Bd Eugène Deruelle, 69432 Lyon Cedex | | SIRET 534 232 558 00062 +33 (0)1 80 91 98 67 | contact@taqt.com Copyright 2022 TAQT SAS – All Rights Reserved.
Legal information The "TaqtOne" or "Taqt One" product concerned by this document is an information collection and display device installed indoors. The product is used in a non-exhaustive manner to achieve digital traceability by badge, to collect on-site intervention requirements, and to collect satisfaction opinions on a question indicated on the product. Please refer to the commercial documentation to find out the extent of the product's functionality.
6- POWER SUPPLY The TaqtOne must only be powered by 6x "ENERGIZER ULTIMATE" AA 1.5 Volt FR6 Lithium (Li-FeS2) batteries." Any other power source, other brand or battery reference will immediately terminate the manufacturer's warranty on the product. TAQT disclaims all liability following the use of a power source not recommended by TAQT which may cause damage to the product and its environment. TAQT does not provide any guarantee regarding the life of the batteries used in its products.
support@taqt.com during the Warranty Period and provide a description of the defect found, and (b) comply with TAQT's instructions regarding the sending of the return package. TAQT shall have no warranty obligation with respect to a returned Product if it determines, at its sole discretion and within the limits of reasonableness, after examination of the returned Product, that the latter is an Ineligible Product (definition below).
