TT-CL025 (instructions) 1.
.Basic parameters of remote control Name LED Stand Light Remote control Model TT-CL025 Device name TAOTRONICS Selfie Compatible system IOS/Android Weight 50g Bluetooth communication 4.2 Bluetooth frequency 2.4G MHz PCB material FR4 Battery CR2032 Bluetooth transmitting power <0DB/M >6m Due to different phone models, the antenna design of the phone Bluetooth remote control distance is different, and the distance will be different if the environment is different.
.Bluetooth setting 1,Hold 3s to turn on bluetooth,the indicator light 250ms flashes rapidly and enters the pairing mode. After holding 3s, it enters standby mode. It will automatically turns off after 7 minutes in standby mode.The blue light will turn off after lighting 1s. If there is a trigger button in standby mode, then go back to the pairing mode and will restart the counting time again.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.