Medix 24 v2 All in One PC
Medix 24 v2 Table of Contents Table of Contents ............................................................................. 2 General Information ......................................................................... 3 Safety and Maintenance ................................................................. 4 Regulatory Information .................................................................. 7 Product Overview ............................................................................
Medix 24 v2 General Information Revision History Date 2021/8/20 Version 1.0 Updates First Release Trademark Recognition All product names and trademarks used in this user’s guide are properties of their respective owners. Intended Use Thank you for choosing the Medix 24 v2 product. This device is intended to serve as a computing unit in a healthcare institution for general use by healthcare personnel.
Medix 24 v2 Safety and Maintenance To avoid any damages caused by improper usage, please read the following information carefully before you start using your All in One PC. Electrical and Power Source Related Hazards ● Use only the power supply and power cord included with your device. ● Ensure your electrical outlet is the same voltage and frequency as shown on the power supply. If you are unsure of the outlet’s voltage and frequency, please consult the local power authority.
Medix 24 v2 ALLOWED TO REPLACE THE BATTERY. Other Hazards ● Do not block the ventilation openings on top of the device. ● Do not use the device if it has been dropped, power supply cord or plug have been damaged, liquid has been spilled on to the device, device has been exposed to rain or moisture, or any other physical damage has occurred. Caring for Your Device ● Turn off and unplug the power cord from the electrical outlet before cleaning the device.
Medix 24 v2 This device is intended only for OEM integrators under the following conditions: The module can be used to installation in other host. the transmitter module may not be colocated with any other transmit or antenna. The module shall be only used with the integral antenna(s) that has been originally tested and certified with this module. As long as 2 conditions above are met, further transmitter test will not be required.
Medix 24 v2 Regulatory Information Your All in One PC conforms to the following regulations and standards: ▪ ▪ ▪ ▪ ▪ ▪ UL 60601-1 3.1 Edition EN 60601-1-2 4th Edition IEC 60601-1-2 3.1 Edition FCC Class B CE Energy Star 8.
Medix 24 v2 Product Overview Package Contents Before using your All-In-One PC, ensure all of the following items are included in the package. If any of the items are missing or are damaged, please contact your dealer. Medix 24 v2 All-In-One PC White Medical Grade PSU White Power cord Features Device features include: ● Fanless all-in-one design ● With battery 7.5 kg/ 16.53 lbs , without 7.1 kg/ 15,65 lbs. ● IP65 at the front, IPX1 at the rear ● Up to Intel® Core™ i7 processor ● SSD M.
Medix 24 v2 Front View 1 1 2 1 12 1 1 1 2 2 2 a a s s 2 2 3 5 No. 1 Icon Item Description Webcam 2 Touchscreen 3 Touch cap : Brightness +/Touch cap : Power key RFID detection area 4 5 4 Use camera to capture images, record videos, or hold a video conference. 10 point projected capacitive multi-touch display with glove support. Brightness High and Low Control Power On (5 Seconds + 2 Seconds LCD Off) RFID reader supports RFID card tapping Top View 1 No.
Medix 24 v2 Bottom View 4 1 2 4 4 3 11 10 9 8 7 6 5 NOTE: The bottom view is displayed with the cable management cover removed. No. Icon Item Description 1 2 Speakers Reading Light Stereo audio output. Helps illuminate work areas. 3 Reading Light Switch Toggle reading light on/off. 4 Physical key Physical Button: On/Off only 5 6 (4) Serial Ports (RJ45) (4) USB 2.0 Ports RJ45 Type connector, Connect RS-232 compatible devices. Connect USB 2.0 compatible devices.
Medix 24 v2 Left and Right Views 43 3 2 3 1 7 4 6 2 ODD SKU No. Icon Item Non-ODD SKU Description Connect USB 2.0 compatible devices. 1 USB 2.0 Port 2 Label Cap 3 Optical Disc Drive 4 Eject pin hole NOTE: To use the USB port, open the port cover first. After using, replace the cover.
Medix 24 v2 Rear View 1 1 2 2 5 3 4 4 No. Icon Item Description Allows proper ventilation of the device. 1 Ventilation Slots 2 VESA mounting holes Cable Management Cover Cable Guide Service Door 3 4 5 WARNING! To prevent overheating, do not block ventilation slots. Used to lock on a mobile medical cart. Use for cable management. Use for securing the AC adapter cable. Use for battery and SSD board maintenance.
Medix 24 v2 Switching On the Device To start using your All-In-One PC, do the following: 1. Connect the power cord to the AC power adapter. 2. Remove the cable management cover. 3. Connect the AC adapter to the DC-in jack on the All-In-One PC’s bottom, and secure the cable to the cable guide as illustrated. 4. Connect the power cord to an electrical outlet. 5. Press the Power key of Touch cap button on the right side of the device. The Touch cap LED and Logo LED will be illuminated.
Medix 24 v2 Specifications The following table includes all the features and operational requirements regarding your panel PC. Item Description Size / Resolution 23.8” FHD dual LVDS 8 bit 250 nits 560.4 mm x 379.6 mm x 49.1 mm ● 22.1 in x 14.9 in x 1.9 in ● Dimension (W x H x L) Weight NOTE: Please refer to page 14. With battery ● 7.5 kg/ 16.53 lbs Without battery ● 7.
Medix 24 v2 RFID RFID reader supports RFID card tapping (optional) Optical Disc Drive 8X DVD RW SATA interface (optional) Adapter Input: 100-240V~1.5A 50/60Hz IP Rating IP65 front panel , IPX1 Top Thermal Solution Fanless housing VESA Wall Mount Output: 19V/4.7A, max.
Medix 24 v2 Dimensions 16
Medix 24 v2 Transport 1. Ambient Air Temperature: -10°C ~ +50°C. 2. Relative Humidity: 15% ~ 95%. 3. Ambient Pressure: 375 mmHg ~ 800 mmHg (500 hPa ~ 1060 hPa). About the All in One PC 1. Rotation angle: 90 degrees. 2. Can be fixed on the mobile device, and being able to be moved.
Medix 24 v2 3. RFID reader supports RFID card tapping. 4. Label tap for check master label information. . ** The barcord displayed at the red arrow is only for notification of the machine’s production serial number, not for the use of patients in diagnosis and treatment. 5.