Talk Electronics Tornado 3.1B Power Amp User Manual T ALK ELECTRONICS LTD. U NIT 3 IMAGE HOUSE 326 MOLESEY R OAD HERSHAM SURREY KT12 3PD ENGLAND TEL: +44 (0)1276 709966 FAX: +44 (0)1276 682843 E-MAIL: info@talkelectronics.com www.talkelectronics.
Talk Electronics Tornado User Manual INTRODUCTION well-being - do not allow it to come into contact with water. Keep it away from potted plants to avoid those all-too-common watering accidents! To clean the amplifier’s case disconnect it from the wall socket and wipe it with a barely damp, lint-free cloth or chamois leather. If you suspect that water has entered the casework, return the amplifier to your dealer so that he can examine it. Thank you for choosing a Talk Electronics Tornado power amplifier.
SIGNAL CONNECTIONS connection periodically to make sure that the wire is still tightly gripped. Better still, use high quality cables factory fitted with appropriate plugs! The Tornado Series was developed using high quality interconnects and speaker cables from Merlin Cables, these allow the amplifiers to operate as intended and deliver their optimum performance. We strongly recommend that you use these cables for all connections. You can obtain these from your dealer or distributor..
PROTECTION MODE When using a Tornado with our Hurricane preamplifier we recommend that you place the units side by side or arrange them on separate shelves of a system rack, separated by about 15cm. Keep your turntable, if you are using one, as far away as possible from the power amplifier.
GUARANTEE To extend your guarantee from 1 year to 3 years FREE of charge please complete and return this form T ALK ELECTRONICS LTD. UNIT 3 IMAGE HOUSE 326 MOLESEY R OAD HERSHAM SURREY KT12 3PD ENGLAND FOLD HERE Model: Tornado 3.
REAR PANEL LAYOUT