AS-1 READER User Manual Rev.1.0 1/6 AS-1 READER User Manual Rev.1.0 TAKUMA SEIKO CO., LTD TEL +81-46-239-0755 FAX +81-46-239-0750 Rev.1.0 TAKUMA SEIKO CO.
AS-1 READER User Manual Rev.1.0 2 / 6 Contents 1 Introduction ........................................................................................................................................... 3 2 Appearance............................................................................................................................................. 3 3 Specification ..................................................................................................................................
AS-1 READER User Manual Rev.1.0 3 / 6 1 Introduction This address sensor unit (AS-1) is an RFID low-frequency (LF) 134.2kHz reader/writer unit for address tag for AGV (Automated Guided Vehicle) system with internal loop antenna. Address tags are used by the AGV to determine its position while driving. AS-1 has two types of the functions by factory default, AS-1 READER is an RFID reader function for use with AGV, AS-1 WRITER is an RFID writer function for writing an ID to a tag.
AS-1 READER User Manual Rev.1.0 4 / 6 4 Part names CN1 5 Interface CN1 (JST B12B-PH-K-S) Pin No. Pin Name Function Description 1 GND - 2 DC +12V Power 3 /Stop I RF output stop signal to sleep (L: Stop mode) 4 /Clock O Data enable signal (100msec) for Data 5 /D7 O Data bit 7 6 /D6 O Data bit 6 7 /D5 O Data bit 5 8 /D4 O Data bit 4 9 /D3 O Data bit 3 10 /D2 O Data bit 2 11 /D1 O Data bit 1 12 /D0 O Data bit 0 Ground Rev.1.0 TAKUMA SEIKO CO.
AS-1 READER User Manual Rev.1.0 5 / 6 6 Operation Normal operation: - Turn on the power. - AS-1 READER can be read ID value (D7-D0) from RFID tag with /Clock = L. - User system will be known an ID value by /Clock = L 100msec width. Stop mode: - AS-1 READER can be entered stop mode (low power consumption) by /Stop = L. - Recommendation: If the AGV is not moving, set Stop mode (/Stop = L). Rev.1.0 TAKUMA SEIKO CO.
AS-1 READER User Manual Rev.1.0 6 / 6 7 REGULATORY COMPLIANCE INFORMATION Product Name: Address sensor unit Model Name : AS-1 READER This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. TOMITA U.S.A INC. (HEADQUARTERS) 7801 Corporate Blvd. Ste. G, Plain City, OH. 43064 U.S.A.