Manual / English passion
The mp3 player passion is a new generation of digital portable device, supporting multiple music formats including MP1, MP2, MP3, WMA ,WMV, ASF and WAV, etc. Its perfect sound quality, great reliability and exquisite appearance make it a masterpiece. Devoutly hope to bring you great enjoyment in this digital age Unique Features: 1. Exquisite Appearance Unique appearance designed and comfortable for handling. 2. Multi-Codec Player Supporting MP1, MP2, MP3, WMA ,WMV, ASF and WAV formats. 3.
Know about MP3 Appearance Display Battery The player is in 9-level battery monitoring system. Indicates that battery is 3.6v and the power in battery will become less than using Indicates low battery power, so please recharge power Basic Function Access to Menus Press Menu to access menus. Scrolling Scroll music, menus,Fast Forward .
List of Menus To access differebt menu functions form main menu Music Mode Setting Mode FM Mode Record Mode Vioce Mode USB Mode Entering Menu System Pressing Mode button may enter the menu system, including main menu (long press of mode key at Stop mode),submenu at Play mode (press to enter) and submenu at stop mode(press to enter). Browse operation Choose music name and singer name: press PREV to choose forward, press NEXT to choose backward.
Volume Control: • Press “VOL+” key for a short time, to increase volume. • Press “VOL-” key for a short time, to reduce volume. Turn On/Off: • When the player is in state of turn off , long press Play button, and then turn on • When the player is in state of turn on, long press Play button, and then turn off Press PLAY for a short time: • play/pause(Pause when recording): exit from sub menu.
Long Start recording Pause recording Enter main menu X Enter Record submenu X press Long Mode press Press FM Mode: Operation Play Mode Action FM status FM submenu Long press Turn off Turn off Saved station:next station; Exit menu Press Long press Enter main menu Enter main menu Press Enter sub menu Back to previous Increase 100KHZ gradually or Next one Push Next Press on Push Prev Press on Vol+ Vol- Without saved station:X stop search Increase 100KHZ search Move forward contin
EQ Mode: 1. Playing music status 2. Press Mode button to enter Play Submenu 3. Push Next switch to select Equalizer menu. 4. Press mode button to enter EQ selection Menu. 5. Push Next button to switch and press Mode button 6. EQ option) : to confirm (Natural) (Rock) (Pop) (Classical) (Soft) (Jazz) (DBB) Lyric Display (Kara-OK Function) This player supports “LRC” lyric files (user may download from http://www.511rc.com), and lyrics may be displayed isochronously while playing music.
The player may save 99 recording files under each directory. 1. enter main menu 2. push Next switch button to enter recording mode 3.Press Mode button for a short time to 4. Press Play button for a short time to start recording.
7. Press Play to start recording 8. Recording Type :High quality recording, “wav” format , high sound quality :High time recording, “act” format, ordinary sound quality :High quality sound control, “wav” format(volume recording stop recording when there is no sound :Long time sound control, “act” format. Play Recorder File 1. Enter main menu 2. Push Next to select “Voice mode" 3.Press Mode to enter Voice mode interface. 4.Press Play to start playing.
Besides the conversion from ACT to WAV , the accessory tool can also play WAV and MP3 files. How to use FM 1. Enter main menu 2. Push Next switch to select FM Mode. 3. Push Next switch to select FM Mode. 4. Push Prev/Next for about 2 seconds, and the player scans forward or backward per 100KHZ ,and stops at the scanned station. If you want to stop scanning, push Prev/Next switch to stop. 5. Adjust slightly: 6.
2. push Next to select “System setting”. 1. enter main menu 3. press Mode to enter “System setting” Parameters Introduction Record time Set the time and date when recorded files are saved Backlight Set a period time (sec.
It starts counting from the time no button is pressed and ends Shutting down the player to save power. Figure 0 indicates that this function is off. “Sleeping Mode” means: One can set such a time (minutes) that whatever mode the player is under, it starts counting from the time no button is pressed and ends shutting down the player. This function is designed for listening to music before going to sleep. Attention: Once “sleeping Mode” is set, it only works once and eliminates the set time automatically.
After connecting to a PC, there are three display modes for the player. 1. Standby status 3. Uploading 2. Downloading 4. USB Disconnecting New Folder The player can identify the 99 folders set up in the Movable U-disk. Firmware Upgrade The player supports firmware upgrading or maintenance through installing special tools on PC 1. enter menu 2. push Next to select “System Setting” 3. press Mode to System setting 4. push Next to select Firmware Upgrade: 5. press Mode to enter Firmware Upgrade 6.
8. Choose new firmware program (you may find it in accessory CD) 9. Press “Start” button , the system starts upgrading. 10. If upgrading successfully, LCD will display like: Firmware upgrade is an operation to promote and optimize the performance of the player. Even if the firmware works without upgrading, there is no any influence on the normal operation of the player. Incorrect operation of firmware upgrading may cause the player working abnormally.
1.at Stop interface.(Current example is 2.press Mode to enter Stop Submenu. at Music Mode, and folders can be selected at both Record and Voice Mode as well.) 3.press Mode again to enter Select 4. push Next or Last to select Folder Folder interface. interface. 5.Press Mode to confirm the folders selected. Note:Independent folders can be set at corresponding modes as Music Mode. Record Mode and Voice Mode ,i.e., three modes are not bound to correspond with the same folder.
(Folder) (Repeat Folder) (Repeat All) Play all the music files in a folder. Repeat all the music files in a folder. Repeat playing all the music files (SHUFFLE) Play all the music files in the current folder at random (Random) (INTRO) Play all the music files in the current folder for the first 10 (Intro) seconds in turn. Tempo Rate (Play Submenu) When playing music Only for MP3 formats) or recorded files, different tempo rate can be set (faster or slower) without changing the tone and sound.
Follow Read (This function does not exist at Voice Mode) 1.Replay between A-B 2.Press Next to enter Follow Read Mode 3.Replay icon “ ” Follow Read icon “ ” and record sound of users is recorded .The 4.After recording time,,the icon changes to “ ” original sound is played ,Push Next button to enter Comparison..。 recording time is as long as A-B Replay Mode. After this mode , pushing Prev may return to A-B Mode. Comparison (This function does not exist at Voice Mode.
see two driver letters on PC. But SP4 should be installed on operating system of Windows 2k , otherwise only one driver letter can be seen. Without such installation, users must choose “single ordinary disk” or “single encrypted disk” in “Online Mode” of “System setting” menu.) and one part can be encrypted as private space which needs password to access to.(If users do not encrypted both parts , USB memory may be treated as two disks.) Such is the great “Private Space” function 1. Connect the player to PC.
2. Partition finishes with hints as follows: Press “OK”, then PC may restart.。 3. Two disks may be displayed after restarting (only one driver letter may be displayed when under Windows 2k SP4).Click to access the encrypted disk (the second in the sequence), on which there are three files .2 of them are concealed files while another one is *.EXE files with disk space of 300k only.
4. Run the executable file “RdiskDecrypt.exe”, and input username and password in dialog box. If they are correct, disk can be accessed and file can be copied. 5. Username and password is required to access to the encrypted disk in every connection to PC. Note: Dividing one disk into two parts may erase the data in it. Please backup the data in disk before division .And merging two parts may also erase the data.