User's Manual

User Manual for Film core drum

1. Introduction

Model: JC-SE-R-001 FCC ID:2APN9JC-SE-R-001

This system is a unit that acquires the type of wrapping paper.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

FCC CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

-Model: JC-SE-R-001

-This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

-Takazono America

Address: 3555 Voyager St. Suite 102 Torrance, CA 90503 U.S.A.

Phone : +1-310-542-8850

PAGE 1
User Manual for Film core drum 1. Introduction Model: JC-SE-R-001 FCC ID:2APN9JC-SE-R-001 This system is a unit that acquires the type of wrapping paper. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 2
. System Description (JC-SE-R-001) Power Supply 5V TOUT/RIN Host device RS232C Film core RFID Reader /Writer RS232C Transceiver RFID tag Power and Communication connector This system equipped with an RFID reader / writer and determines the type of packaging paper based on the contents of the set “RFID tag” (mounted on “film core). The type of “RFID tag” corresponds to the international standard ISO15693, and the conformity tags are YTBP01-129 (by YRSC).
PAGE 3
4. Operating ・Supply to “Power and Communication connector” DC5V. ・Send the following commands from the “Host device”. 5. Command List The behavior is determined by a state machine capable to perform a certain set of commands. By writing a command-code to the command register the command is executed. Arguments and/or data necessary to process a command, are exchanged via the FIFO buffer.