User’s Manual TR3XM-SD01 TR3XM-SU01 TR3XM-SN01 TR3XM-SN02 Manual No.
Introduction Thank you for purchasing a TR3XM-SD01／SU01／SN01 ／SN02RFID READER/WRITER. Be sure to read this manual before using the product. After reading it, store the manual in a convenient place for future reference. Manual No.
Regulations and Standards FCC This product is conform to the FCC standards. FCC Rules (Federal Communications Commission) This product complies with Part 15 Subpart B and C of the FCC Rules. FCC ID : MK4TR3XM-SX01 FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Safety Precautions The following symbols are used in this manual to indicate precautions that must be observed to ensure safe use of this product. The precautions provided here contain important safety information. Be sure to observe these precautions. The following signal words are used in this manual. Failure to comply with a WARNING may result in serious injury or death. Failure to comply with a CAUTION may result in injury to the operator, or damage to the items involved.
Contents 1 Product Overview ................................................................ ................................................................................................ ...................................................................... ...................................... 1 1.1 2 Names of Parts and Functions ................................................................ ..................................................................................... .....................
1 Product Overview 1.1 Features 1 Product Overview 1.1 Features This product uses the 13.56MHz frequency. This product is the electromagnetic induction type non-contact IC can read and write RFID tag data. This Product is the desktop reader choice to support various contactless applications such as electronic ID, payment & public transportation schemes and to interact with NFC-enabled devices.
1 Product Overview 1.1 Features ■ Conform to international standards ISO/IEC15693 and ISO/IEC18000-3(Mode1, 3) ISO/IEC14443 TypeA ISO/IEC14443 TypeB ISO/IEC18052(Passive Mode), FeliCa ■ Software TR3-series common communication protocol Software Development Kit ■ Useful Continuous inventory mode UID of the tag automatically sends Host Device. RDLoop mode UID or User Data of the tag automatically sends Host Device. For more information please refer to the TR3-PROTOCOL manual.
2 Names of Parts and Functions 2.1 TR3XM-SD01 2 Names of Parts and Functions 2.1 TR3XM-SD01 ④ ③ ⑧ ⑨ ② ⑤ ⑦ ⑥ ① No ① ② Name RFID sticker FCC ID sticker Description Specify that the RFID radio waves are radiated. Production numbers, will be 8-digit serial number. Model Name Serial number：＊＊＊＊＊＊＊＊(F) ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ Connector DC Jack Rubber leg Buzzer LED Cable hook Screw holes Manual No.TDR-MNL-SX01-EN-101 Connect the RS-232C cable. DC +5V input. 4pcs Sounds according to settings.
2 Names of Parts and Functions 2.2 TR3XM-SU01 2.2 TR3XM-SU01 ③ ⑦ ② ④ ⑥ ⑤ ① No ① ② Name RFID sticker FCC ID sticker Description Specify that the RFID radio waves are radiated. Production numbers, will be 8-digit serial number. Model Name Serial number：＊＊＊＊＊＊＊＊(F) ③ ④ ⑤ ⑥ ⑦ Connector Rubber leg Buzzer LED Screw holes Manual No.TDR-MNL-SX01-EN-101 Connect the USB cable. 4pcs Sounds according to settings. Displays the status of this product.
2 Names of Parts and Functions 2.3 TR3XM-SN01 2.3 TR3XM-SN01 ⑪ ④ ⑩ ⑧ ③ ② ⑨ ⑤ ⑦ ⑥ ① No ① ② Name RFID sticker FCC ID sticker Description Specify that the RFID radio waves are radiated. Production numbers, will be 8-digit serial number. Model Name Serial number：＊＊＊＊＊＊＊＊(F) ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ Connector DC Jack Rubber leg Buzzer LED Cable hook Screw holes Reset switch State switch Manual No.TDR-MNL-SX01-EN-101 Connect the TCP/IP cable. DC +5V input. 4pcs Sounds according to settings.
2 Names of Parts and Functions 2.4 TR3XM-SN02 2.4 TR3XM-SN02 ⑩ ④ ⑧ ③ ② ⑨ ⑤ ⑦ ⑥ ① No ① ② Name RFID sticker FCC ID sticker Description Specify that the RFID radio waves are radiated. Production numbers, will be 8-digit serial number. Model Name Serial number：＊＊＊＊＊＊＊＊ ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ Connector DC Jack Rubber leg Buzzer LED Cable hook Screw holes Connection LED Manual No.TDR-MNL-SX01-EN-101 Connect the TCP/IP cable. DC +5V input. 4pcs Sounds according to settings.
3 Setting and connection 3.1 Setting 3 Setting and connection 3.1 Setting 3.1.1 DeskTop 3.1.2 Wall Installation M4 Screw Wall Manual No.
3 Setting and connection 3.2 Connection 3.2 Connection This product connects with Host Device with the cable. 3.2.1 Attaching the Cable Model Name TR3XM-SD01 TR3XM-SU01 TR3XM-SN01 TR3XM-SN02 Manual No.
4 Specifications 4.1 TR3XM-SD01 4 Specifications 4.1 TR3XM-SD01 Specifications Item Applicable Japan Radio Law Standards FCC Parameter ARIB STD-T82 FCC Part 15 Subpart B,C FCC ID : MK4TR3XM-SX01 EU RoHS(2002/95/EC) Supports 13.56MHz ±50ppm(Ta=25℃) or less 13.56MHz ±40kHz(Ta=25℃) RoHS Carrier frequency Antenna Resonant frequency Transmit power or 10～200mW ± 20%(Ta=25℃, VCC=5.
4 Specifications Item Communication distance Specifications 4.1 TR3XM-SD01 Parameter Standards Communication distance ISO/IEC 15693 10cm ISO/ISC 18000-3 (Mode1) ISO/ISC 18000-3 8cm (Mode3) ISO/ISC 14443A 5.5cm ISO/ISC 14444B 1cm ISO/ISC 18092 3cm (Passive Mode) (Communication distance depends on the environment.
4 Specifications Item Mechanical Dimensions data (W x D x H) Weight Installation Electrical data Power Ambient Conditions Temperature Operating range Humidity Operating range Temperature Storage range Humidity Storage range AC Adaptor Accessories Parameter 140 x 110 x 38.5mm (Protrusions except) approx. 270g M4 Screw Screw is not included. Supply Voltage Current consumption Carrier off Power down mode Consumption 0 to 40 degree ：5V±10% ：approx. 170mA ：approx. 53mA ：approx. 44mA ：max 1.
4 Specifications 4.2 TR3XM-SU01 4.2 TR3XM-SU01 Specifications Item Applicable Japan Radio Law Standards FCC Parameter ARIB STD-T82 FCC Part 15 Subpart B,C FCC ID : MK4TR3XM-SX01 EU RoHS(2002/95/EC) Supports 13.56MHz ±50ppm(Ta=25℃) or less 13.56MHz ±40kHz(Ta=25℃) RoHS Carrier frequency Antenna Resonant frequency Transmit power or 10～200mW ± 20%(Ta=25℃, VCC=5.
4 Specifications Item Communication distance Specifications 4.2 TR3XM-SU01 Parameter Standards Communication distance ISO/IEC 15693 10cm ISO/ISC 18000-3 (Mode1) ISO/ISC 18000-3 8cm (Mode3) ISO/ISC 14443A 5.5cm ISO/ISC 14444B 1cm ISO/ISC 18092 3cm (Passive Mode) (Communication distance depends on the environment.
4 Specifications Item Mechanical Dimensions data (W x D x H) Weight Installation Electrical data Power Ambient Conditions Temperature Operating range Humidity Operating range Temperature Storage range Humidity Storage range USB cable Accessories Parameter 140 x 110 x 38.5mm (Protrusions except) approx. 270g M4 Screw Screw is not included. Supply Voltage Current consumption Carrier off Power down mode Consumption 0 to 55 degree ：5V±10% ：approx. 180mA ：approx. 61mA ：approx. 70mA ：max 1.
4 Specifications 4.3 TR3XM-SN01 4.3 TR3XM-SN01 Specifications Item Applicable Japan Radio Law Standards FCC Parameter ARIB STD-T82 FCC Part 15 Subpart B,C FCC ID : MK4TR3XM-SX01 EU RoHS(2002/95/EC) Supports 13.56MHz ±50ppm(Ta=25℃) or less 13.56MHz ±40kHz(Ta=25℃) RoHS Carrier frequency Antenna Resonant frequency Transmit power or 10～200mW ± 20%(Ta=25℃, VCC=5.
4 Specifications Item Communication distance Specifications 4.3 TR3XM-SN01 Parameter Standards Communication distance ISO/IEC 15693 10cm ISO/ISC 18000-3 (Mode1) ISO/ISC 18000-3 8cm (Mode3) ISO/ISC 14443A 5.5cm ISO/ISC 14444B 1cm ISO/ISC 18092 3cm (Passive Mode) (Communication distance depends on the environment.
4 Specifications Item Mechanical Dimensions data (W x D x H) Weight Installation Electrical data Power Ambient Conditions Temperature Operating range Humidity Operating range Temperature Storage range Humidity Storage range AC Adaptor Accessories Parameter 140 x 110 x 38.5mm (Protrusions except) approx. 270g M4 Screw Screw is not included. Supply Voltage Current consumption Carrier off Power down mode Consumption 0 to 40 degree ：5V±10% ：approx. 380mA ：approx. 240mA ：approx. 230mA ：max 2.
4 Specifications 4.4 TR3XM-SN02 4.4 TR3XM-SN02 Specifications Item Applicable Japan Radio Law Standards FCC Parameter ARIB STD-T82 FCC Part 15 Subpart B,C FCC ID : MK4TR3XM-SX01 EU RoHS(2002/95/EC) Supports 13.56MHz ±50ppm(Ta=25℃) or less 13.56MHz ±40kHz(Ta=25℃) RoHS Carrier frequency Antenna Resonant frequency Transmit power or 10～200mW ± 20%(Ta=25℃, VCC=5.
4 Specifications Item Communication distance Specifications 4.4 TR3XM-SN02 Parameter Standards Communication distance ISO/IEC 15693 10cm ISO/ISC 18000-3 (Mode1) ISO/ISC 18000-3 8cm (Mode3) ISO/ISC 14443A 5.5cm ISO/ISC 14444B 1cm ISO/ISC 18092 3cm (Passive Mode) (Communication distance depends on the environment.
4 Specifications Item Mechanical Dimensions data (W x D x H) Weight Installation Electrical data Power Ambient Conditions Temperature Operating range Humidity Operating range Temperature Storage range Humidity Storage range AC Adaptor Accessories Parameter 140 x 110 x 38.5mm (Protrusions except) approx. 270g M4 Screw Screw is not included. Supply Voltage Current consumption Carrier off Power down mode Consumption 0 to 40 degree ：5V±10% ：approx. 400mA ：approx. 290mA ：approx. 280mA ：max 2.
5.1 5 Accessories AC Adapter(TR3-PWR-5V-1) 5 Accessories 5.
5.2 5 Accessories RS232C Cross-cable(CB-232C-2) 5.2 RS232C Cross-cable(CB-232C-2) ■ Specifications Specifications RoHS Connector screw Cable length Connection Parameter EU RoHS(2002/95/EC) Support D-sub 9Pin Inch screw approx. 1.8m Cross-cable ■ Dimension (1800) Unit：mm ( )is Recommended Dimension Manual No.
5.3 5 Accessories USB Cable(GH-USB20/1.8M) 5.3 USB Cable(GH-USB20/1.8M) ■ Specifications Specifications RoHS Connector Cable length Parameter EU RoHS(2002/95/EC) Support USB(A)-USB(B) approx. 1.8m ■ Dimension (1800) Unit：mm ( )is Recommended Dimension Manual No.
5.4 5 Accessories RFID Sticker (SEL41400L) 5.4 RFID Sticker (SEL41400L) φ18mm 本ステッカは、医療機器装着 者に対し、RFID の電波が出 ていることを明示するため のものです。 アンテナが装置等に組み込 まれる場合、RFID 機器の本 体外部からよく見える位置 （アンテナ付近）に貼り付け ることを推奨しています。 Manual No.
6 Maintenance This product is mainly used in electronic components and semiconductors. Therefore, the long-term stable operation, the environment and conditions are expected to defect, as shown below. • Device degradation due to overvoltage and overcurrent. • Device degradation due to high temperature and long-term stress. • Poor contact of the connector and cause deterioration of insulation by moisture or dust. • Connector corrosion by corrosive gases.
Revision History Revision code 1.00 1.01 Date 2012/03/08 2014/06/04 Manual No.
[URL] [Mail] http://www.takaya.co.jp/ rfid@takaya.co.
