Product Manual

Productmanual

ProductName:light box

Itemnumber:NH369

I.overview

The controller adopts advanced computer control chip, was controlled by the

433MHzwirelesssignalisusedto control the various LED as a light source,suchas

point light, soft light, wall lamp, glass curtain wall lamp and so on; with the

advantages of low price, convenient connection, easy to use, easy to operate;

according to the actual needs of customers can be realized gradient, dimmed,

jumping, flashing, flashing lights and a variety of static color effect, has the

advantagesofportability,easytouse.

Twotechnicalparameters

●Operatingtemperature:‐20‐60DEGC

●

Powersupplyvoltage:DC 3V

●Output:3loop

●Theconnectionmode:commonanode



RemoteFrequency:433.82MHZ

●Remotecontrolsize:L43.5*W12.9*H5.2mm

●Packingbagsize:L155*W120mm

PAGE 1
Product manual Product Name: light box Item number: NH369 I.
PAGE 2
●Net weight: 35g ●Gross weight: 40g ●Static power dissipation: <0.5W ●Output current: <2A (per loop) Three.
PAGE 3
In any state, press can turn t on an nd off thee controlller. Auto plaay key, press the keey in any state s of boot, b each dynamic mode m will automattically ruun three times t in turn t In dynamic mode, m press this key y to switcch to the static mo ode, andd change the t staticc color too the forw ward / revverse one at a time. In dynamic mode, m presss this ke ey to switch to the static mo ode. Each brightnness is inncreased / reduced by a leveel of 5.
PAGE 4
Five. The function of encoding and decoding: When the code is pressed at the same time, the "COLOR" key and "BRIGHT" key will flash, that is, "one to one" pairing. Once the code is successful, only the remote controller can control the reception. Decoding long press white keys will flash, that is, clear code success, it becomes any one remote control can control the receiver into a pass code.
PAGE 5
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.