29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential & Tentative EYSFDCSXX Bluetooth® Module EYSFDCSXX (RF+Baseband (Class 2) USB) Data Report In case you adopt this module and design some appliance, please ask for the latest specifications from the local sales office. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license.
9-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential & Tentative EYSFDCSXX Document constituent list Control name General Items Absolute maximum ratings Electrical characteristics Electrical characteristics Circuit schematic Outline / Appearance Outline / Appearance Pin Layout Control No. HD-AG-A031272 HD-AM-A031272 HD-AE-A031272 HD-AE-C031272 HD-MC-A031272 HD-AD-A031272 HD-AD-B031272 HD-BA-A031272 Document Page 1/3 – 3/3 1/1 1/3- 3/3 1/1 1/1 1/2 - 2/2 1/1 1/2 - 2/2 Rev. record 24-Sep.-2004> Ver.0.
29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential & Tentative EYSFDCSXX Control No. Control name HD-AG-A031272 (1/3) General Items Scope This specification (“Specification”) applies to the hybrid IC “EYSFDCSXX” for use Bluetooth® module (“Product”) manufacture by TAIYO YUDEN Co., Ltd. (“TAIYO YUDEN”) 1.
29-Mar.-2005 TAIYO YUDEN Confidential & Tentative EYSFDCSXX Control No. HD-AG-A031272 Ver.1.1 (2/3) Control name General Items d. This Product mentioned in this Specification is manufactured for use in Note PCs, PDAs and Cellular Phones.
29-Mar.-2005 TAIYO YUDEN Confidential & Tentative EYSFDCSXX Control No. HD-AG-A031272 Ver.1.1 (3/3) Control name General Items n. Ability of lead free mounting at customer's assembly (Heat resistance of this Product) :Yes Containment of hazardous substance in this Product *Pb (Lead) : Non use *Additional RoHS regulation substance (Cd.Hg.Cr+6.PBB.PBDE) :Non use p.
29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential & Tentative EYSFDCSXX Control No. HD-AM-A 031272 Control name Absolute maximum ratings (1/1) Absolute maximum ratings Item Supply voltage Input voltage Symbol VDD_3.3V Min. -0.3 Vin -0.3 Typ. Rating Max. 3.6 Unit V VDD_3.3V+0.3 V Remark I/O terminals without USB interface Recommendation operating range Item Symbol Supply voltage Supply voltage ripple and spike noise Operation temperature range Storage temperature range VDD_3.3V Min. 3.
29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential & Tentative EYSFDCSXX Control No. HD-AE-A 031272 Electrical characteristic (1/3) Control name Electrical characteristics DC Specifications The Specification applies for Topr.= 25 degrees C, VDD_3.3V=3.3V No. Parameter 1 Operating Voltage 1 Condition Symbol VDD_3.3V Min. 3.15 Typ. 3.3 Max. 3.45 Unit V 2 Input Low Voltage1 /RESET, PIO_X VIL1 -0.3 0.
29-Mar.-2005 TAIYO YUDEN Confidential & Tentative EYSFDCSXX Control No. HD-AE-A 031272 Ver.1.1 (2/3) Control name Electrical characteristics Timing for Power Up/Down Sequence The Specification applies for Topr.= 25 degrees C, VDD_3.3V=3.3V No. Parameter Condition Symbol Min Typ Max Unit 2 ms 1 VDD_3.3V Rise Time from 0V to 3.15V t1 0 2 VDD_3.3V=3.
29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential & Tentative EYSFDCSXX Control No. HD-AE-A 031272 (3/3) VDD_3.3V Control name Electrical characteristics t2 t1 t7 High - Z High - Z /RESET t4 t5 t3 t8 USB_I/F Timing Diagram for Power Up Sequence VDD_3.
29-Mar.-2005 TAIYO YUDEN Confidential & Tentative EYSFDCSXX Control No. HD-AE-C 031272 Ver.1.1 (1/1) Control name Electrical characteristics Module Stack USB I/F HOST USB HCI Host Transport HCI Implementation Link Manager Link Controller Base Band Radio Note: The protocol stack in the module is compliant with the Specification of the Bluetooth® System V2.
29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential & Tentative EYSFDCSXX Control No. HD-MC-A 031272 (1/1) Control name Circuit Schematic Block Diagram CRYSTAL 16 MHz 8Mbit Flash ROM Antenna Baseband Balun filter RF Bluetooth Device Micro controller LDO Connector 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 VDD_3.
1-Dec.-2004 Ver.1.0 TAIYO YUDEN Confidential & Tentative EYSFDCSXX Control No. HD-AD-A031272 Control name Outline/Appearance (1/2) Unit: mm, Tolerances unless otherwise specified: +/-0.2mm 18.2+/-0.1 3.1+/-0.35 20 1 4.5+/-0.3 2.75 7.5+/-0.3 10.2+/-0.3 15.0 10 13.0+/-0.1 11 2.75 Φ2.5+/-0.1 15.2+/-0.3 28.5+/-0.3 31.0 max 3 Indication label Note: Outline/Appearance data is PRELIMINARY, not guaranteed and subject to change without notice.
1-Dec.-2004 Ver.1.0 TAIYO YUDEN Confidential & Tentative EYSFDCSXX Control No. HD-AD-A031272 Control name Outline/Appearance (2/2) Recommendation for Module Mouting 15.0 5.7 Mother Board Mother Board Module 2 .0 M in Note : a. We recommend cutting motherboard, on which Taiyo Yuden module will be mounted, as described in the followings in order to ensure antenna characteristics. b.
1-Dec.-2004 Ver.1.0 TAIYO YUDEN Confidential & Tentative EYSFDCSXX Control No. HD-AD-B031272 (1/1) Control name Outline/Appearance Indication label (dimension : mm) 5.45 5.2 00037A00A000 P/N : EYSFDCSXX R2.9 13.8 FCC ID : ************ RYYEYXFDC IC : ************* 4389A-EYXFDC Taiyo Yuden Co., Ltd. Made in Japan 29.
1-Dec.-2004 Ver.1.0 TAIYO YUDEN Confidential & Tentative EYSFDCSXX Control No. HD-BA-A031272 Control name Pin Layout (1/2) Pin Descriptions Terminal No. Terminal name Input/Output Input Description 1 VDD_3.
1-Dec.-2004 Ver.1.0 TAIYO YUDEN Confidential & Tentative EYSFDCSXX Control No. HD-BA-A031272 (2/2) Control name Pin Layout Notes 1. Pin1 (VDD_3.3V) is used for power supply of BT module. (MAX 200mA). 2. Strength pull-downs (pull-ups) are equivalent to a few kOhms resistance, but are more accurately modeled as a 40 uA current drain (source). 3. Weak pull-ups can be thought of 1M Ohm connections to VDD, but are more accurately modeled as a -1 uA current source.
1-Dec.-2004 Ver.1.0 TAIYO YUDEN Confidential & Tentative EYSFDCSXX FCC Regulatory Information CAUTION: To maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
