Quick Installation Guide Plug the power Plug the Audio cable, and then adjust the volume Turn the Receiver’s power on Insert batteries Turn the Microphone’s power on
Thank you very much for selecting DW‐25 Digital Wireless System. It is recommended to read this manual carefully before using to make optimum use of the equipment. DW‐25 Digital Wireless System, based on the concept of designing for modern lifestyle, with graceful curve, fine texture and user friendly design, is suitable for all kinds of scenario in family, karaoke, school, company, organization, or any place that requires the mobility function of the wireless microphone. 1.
2. Parts and Functions: 2.1 DW‐25R Digital Wireless Receiver（as shown in Figure 2.1） (1) Power Switch: Switches on/off the Receiver, with status LED. (2) Antenna: Receives signals from the microphone. The angle of the antennas can be adjusted leftward, rightward or backward. (3) Mic A Connecting LED: Lights up when microphone A is successfully connected. (4) Mic B Connecting LED: Lights up when microphone B is successfully connected. (5) Mic B Volume Controller: Controls the output volume of microphone B.
(1) Power Switch: Switches on/off the microphone (with status LED). (2) Distance Switch: Adjusts long, medium, short range of distance. (3) Microphone Reset Button: Resets microphone A signals. (FOR TECHNICIANS USE ONLY) (4) Antenna Cover: Protects the antenna, and the microphones can be easily identified with different color covers. (Do not hold onto this area while using the microphone) (5) Battery Compartment: Accommodates two AA batteries. Figure 2.2 3.
off to complete the system turn off. 3.3 Replace Batteries: 3.3.1 When the Microphone is on, and it has already connected with the Receiver, but the power status LED on Microphone keeps blinking green, it indicates the battery energy is running low. Please replace the batteries. 3.3.2 Remove the Microphone housing and replace two new AA batteries in the Battery Compartment according to the polarity marks. 3.3.3 Put back the Microphone housing. Figure 3.1 3.4 Distance Adjustment 3.4.
Short Long Medium Figure 3.3 4. Pairing (FOR TECHNICIANS USE ONLY) 4.1 Plug the Power Adapter to DW‐25R, and then turn the power on. 4.2 Install batteries in DW‐25T, and then turn the power on. 4.3 Press the Reset Button on the Receiver, and the corresponding LED will blink. 4.4 Press the Reset Button on the DW‐25T, and the Microphone LED will blink. 4.5 The Microphone LED and Receiver A channel or B channel LED will blink simultaneously, it indicates the auto pairing is activated by the program.
Receiving Sensitivity：‐82dBm Output Jack：ø 6.3mm Female Jack Dimension：210(L) × 182(W) × 105(H) mm Weight：800g 50g 6.2 Handheld Digital Wireless Microphone： Model：DW‐25T Carrier Frequency：2.403G～2.478G Hz Capsule：Dynamic Polar Pattern：Super‐Cardioid Impedance：600Ω Frequency Response：80Hz~12000Hz Power Consumption：65mA Power Supply：Two AA batteries Distance Switch：long (approx. 30M), medium (approx. 20M), short (approx. 10M) Battery Life：Approx. 30 hours (alkaline battery) Dimension：ø 54.4 × 258.
.3 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference； (2)This device must accept any interference received, including interference that may cause undesired operation.
※ Instruction on mounting the Receiver in the cabinet ( mounting brackets are optional accessories) (1) Mounting a Receiver in 1U cabinet (2) Mounting 2 Receivers in 1U cabinet
