T03-00312 series: Analog and DMR Tier 2 portable radios are elsewhere in this manual referred to as TP3300 T03-00313 series: Analog and DMR Tier 2 portable radios, with added GPS and BT functionality, are elsewhere in this manual referred to as TP3350
Safety warnings used in this guide ........................................... 20 Related documentation............................................................. 21 Package Contents .................................................................... For your safety — battery warning............................................. Attaching labels to the radio or battery ..................................... Charging the battery before first use ........................................
About the chargers ................................................................... Before using the charger .......................................................... Charging temperatures............................................................. Leaving the battery on charge .................................................. Receiving calls while charging.................................................. Low battery warning .................................................................
All information contained in this document is the property of Tait International Limited. All rights reserved. This document may not, in whole or in part, be copied, photocopied, reproduced, translated, stored, or reduced to any electronic medium or machine-readable form, without prior written permission from Tait International Limited. The word TAIT and the TAIT logo are trademarks of Tait International Limited.
BRP10512052, MXPA06015241 - US 7200129, AU2005226531, CA2558551, CN1930809, GB2429378, JP4351720, BRP10508671, NZ549124, KR848483, RU2321952 The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc, and any use of such marks by Tait International Limited is under licence. Other trademarks and trade names are those of their respective owners.
Before using your radio, please read the following important safety and compliance information. For your own safety and to ensure you comply with the radio frequency (RF) exposure guidelines of the United States Federal Communication Commission’s (FCC), Industry Canada, and those from other administrations, please read the following information before using this radio.
Do not talk (transmit) on the radio more than the rated transmit duty cycle. This is important because the radio radiates more energy when it is transmitting than when it is receiving. When listening and talking on the radio, hold it upright in front of your face so that it is at least one inch (2.5 cm) away from any part of your face. Keeping the radio at the recommended distance is important because exposure to RF decreases rapidly the further away the antenna is from your body.
European Directive 2013/35/EU on minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (electromagnetic fields). This radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environments at operating duty factors of up to 50% talk to 50% listen.
Part 15 of the FCC Rules imposes RF emission limits on receivers. This radio complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Innovation, Science and Economic Development Canada Compliance licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
This product meets all ACMA regulatory requirements for electromagnetic compatibility (EMC). For more information about EMC compliance, visit the ACMA website at https://www.acma.gov.au/Industry/ Suppliers/Product-supply-and-compliance. AS/NZS 4365 deals with the use of frequencies in the 476.425 to 477.400 MHz band.
Channel 40 is the customary road vehicle channel. In the European Community, radio and telecommunications equipment is regulated by the Radio Equipment Directive (2014/52/EU). The requirements of this directive include protection of health and safety of users, as well as electromagnetic compatibility. This product is an FM radio transceiver.
Some electronic devices may be prone to malfunction due to the lack of protection from RF energy that is present when your radio is transmitting. Examples of electronic devices that may be affected by RF energy are: aircraft electronic systems vehicular electronic systems such as fuel injection, anti-skid brakes, and cruise control medical devices such as pacemakers and hearing aids medical equipment in hospitals or health care facilities. Switch off the radio before boarding an aircraft.
Unless the radio is specifically certified for use in a potentially explosive atmosphere, do not take the radio into such an atmosphere. An explosion could cause serious injury or death. Examples of potentially explosive atmospheres include any environment where there are flammable liquids, gases, or dusts. Turn off the radio before approaching any area where you are instructed to turn off a two-way radio. Keep the radio away from airbags and airbag deployment areas.
In the European Community, radio equipment fitted to automotive vehicles is regulated by UNECE Regulation 10 Revision 5. The requirements of this regulation cover the electromagnetic compatibility of electrical or electronic equipment fitted to automotive vehicles. The radio is designed to satisfy the applicable compliance regulations. Do not make modifications or changes to the radio that are not expressly approved by Tait.
A damaged battery can cause an explosion or fire, and can result in personal injury and/or property damage. To prevent personal injury and/or damage to property, read the important safety information supplied with the battery. Do not short-circuit the battery contacts, neither intentionally nor accidentally, e.g. by placing the battery with conductive materials such as keys or jewelry inside a pocket or container.
This section shows the menus and submenus that may be programmed for your radio (for radios with display only). Edit contact Delete contact View contact Forward Reply Talk around Power level Squelch level Lone worker Backlight Day/night mode Brightness Keypad lock LED Tones Man down1 Encrypt Channel display mode Language Radio password Optional key VOX Keypad mode Vibration Frequency Slot Color code Tx contact Rx group list CTCSS Radio alias Radio ID 1.
This user’s guide provides information about the T03-00312 (TP3300) and T03-00303 T03-00313 (TP3350) T03-00302 DMR conventional and analog portable radios. Both models are available with the following front panels: display and 16 keys display and 4 keys no display and no keys These front panels are interchangeable. Contact your radio provide for more information. Bluetooth®(page 42), GPS (page 52), and man-down features are only available in TP3350 portables. Mandown can operate in all signalling modes.
This alert is used to highlight information that is required to ensure procedures are performed correctly. Incorrectly performed procedures could result in equipment damage or malfunction. This icon is used to draw your attention to information that may improve your understanding of the equipment or procedure. The following documentation is also available for your Tait radio, which you can access from the Tait Technical Support website (http://support.taitradio.
Once you have unpacked your radio, there are a few tasks you must do before you can use it. The most important of these is to charge your battery for the first time — allow 2.5 hours for this. Do not charge the battery or change the antenna in a hazardous location. An explosion could cause serious injury or death.
Your TP3 package contains the following items: Radio Antenna(s) Battery(s) Battery Charger Multi-National Plug Pack Belt Clip Safety and Compliance documents
This radio uses a Lithium-ion battery. If the battery is damaged or handled in an unsafe manner, it can cause personal injury and/or damage to property. Read the important safety information included with your battery. The radio has recesses to attach labels to the front (not for 16-key radio), both sides and the rear. Please contact your Tait dealer for pre-printed, customized labels. Do not cover the battery vent hole or the vent hole on the radio chassis.
Before using your battery for the first time, you must charge it. Follow the instructions included with your Tait charger. This information is repeated in the section "Charging and caring for batteries" on page 53. For best charging performance, switch off the radio before placing it in the charger.
Rotate the power/volume control switch counterclockwise to turn off the radio. If the battery has been attached while the radio is turned on, turn the radio off and then on again before use. Insert the top of the battery into the recess at the back of the chassis. Lightly press the bottom of the battery towards the radio until the battery catch clicks. Make sure that the battery is firmly in position. The battery is secured to the radio by a battery catch in the radio’s rear panel.
Before using the radio, screw the antenna clockwise into the antenna connector. The antenna should be screwed sufficiently tight so that it doesn’t unscrew easily. This is important as it creates a seal. Do not change the antenna in a hazardous location. An explosion could cause serious injury or death. Use a firm grip and turn the antenna counterclockwise half a turn. Use a lighter grip to fully unscrew the antenna, and carefully remove it.
Audio accessories plug into the radio’s accessory connector. The accessory connector is protected by a cover, which needs to be removed before an accessory can be installed. The accessory cover protects the accessory connector from electrostatic discharge. Keep the cover in place unless the connector is in use. To remove the accessory cover and install an audio accessory: Use a coin or other blunt object to loosen the screw that secures the accessory cover to the radio.
This section gives an overview of your DMR radio, describes the radio’s controls and indicators, and explains how the radio menus are organized.
Your DMR digital radio can be programmed for DMR conventional. Analog conventional operation is also available. You may notice differences between digital and analog calls in terms of: static noise in low signal areas, and radio coverage in marginal reception areas. On digital networks there is no static noise, even in low signal areas. This lack of static is because your digital radio removes the ‘noise’ from the call, so that you hear only clear voice.
On analog channels, your radio may be programmed so that you hear all conversations on a channel, or your user group may be segregated from other user groups by using special signaling. The special signaling is used to control the muting and unmuting of your radio, so that your radio is muted when other user groups are talking and unmuted for members of your user group.
The radio controls are the PTT key, power/volume control, channel selector, scroll keys, selection keys, and function keys. Some keys have functions assigned to both short and long key presses: a short key press is less than one second, and a long key press is more than one second. The radio controls and their functions are described in the following sections.
PTT key Press and hold to transmit and release to listen Power/volume Rotate to turn the radio on and change control the speaker volume Channel Select and change channels selector Left and right Action determined by the text above the selection keys selection key Scroll keys Scroll up and down through a list of menu options, scroll left and right in messages, or access a pre-programmed menu Function keys Programmed for frequently used options Alphanumeric Used to enter letters and numbers keys
The messages and icons you see on your radio display depend on the mode in which your radio is operating and the way it is programmed. These are some of the icons you may see on your radio display: No signal. Signal strength indicator: the more bars, the stronger the signal being received by the radio Battery indicator: shows how much charge is available in the battery. Bluetooth: The Bluetooth feature is enabled but there is no remote Bluetooth device connected.
Unread message. VOX enabled. Speaker open. Private Call Indicates a Private Call in progress. In the Contacts list, it indicates a subscriber alias (name) or ID (number). Bluetooth Audio Device Bluetooth-enabled audio device, such as a headset. Item sent successfully.
The status LED indicator and the radio’s audible tones—together with the radio display—all combine to give you information about the state of your radio. The most common way the indicators work is described in the following sections. The way these indicators behave may be affected by the way your radio is programmed. status LED Red On: The radio is transmitting. Flashing: The battery is low. Green On: The radio is receiving, or detecting activity over the air. Orange On: The radio is powering up.
Your radio may be programmed to be silent, which means you may not hear any alerts. The radio uses audible tones to alert you to its status: Radio controls and keypress tones—the tones and beeps you hear when you press your radio’s keys or use the controls. Incoming call tone—when the radio is receiving a call. Warning tones—when there is an error, or the battery is low, for example.
The function keys provide access to some of the features you will use most often. These features are assigned to the function keys when the radio is programmed. Some keys may have a feature associated with both a short key press and a long key press.
Radios with display have a number of menus, each containing lists or submenus. The menus available depend on the way your radio is programmed. See also "Menu map" on page 19. To access the menu, press the left selection key whenever appears above it. Use the scroll keys to move through the menu list. When the menu you want is highlighted, press (left selection key). To go back one level, press (right selection key).
This section describes the basic operation of your radio.
Rotate the On/Off/Volume control switch clockwise until you hear a click. You see a welcome message or welcome image. The LED lights up solid orange and the Home screen lights up if the backlight setting is set to turn on automatically. To turn off the radio, rotate the switch counterclockwise until you hear a click. You see a brief on the radio’s display. Your radio may not turn on if your battery is very low. (See "Low battery warning" on page 56.
Rotate the power/volume control clockwise to increase the speaker volume and counterclockwise to decrease the volume. The volume control also changes the volume level of the radio’s audible indicators. You may be able to connect a Bluetooth device to your radio. Bluetooth devices may operate with Tait radios, provided they: are compatible with the Bluetooth Specification Version 2.0 or higher. Tait recommends Bluetooth Specification Version 2.1 or higher.
Avoid coming in contact with the internal antenna of a headset or radio. Before attempting to connect a device, Tait recommends that the device is fully charged. Refer to the documentation of your Bluetooth device for charging instructions. Pairing creates a unique and encrypted wireless link between the radio, and the Bluetooth device. To use a device with your radio, they must first be paired.
Select . The display shows . Your Bluetooth device may require additional steps to complete the pairing. Refer to the documentation of your Bluetooth-enabled device. If successful, the radio display shows . A tone sounds and appears beside the connected device. The Bluetooth Connected icon appears on the status bar, or if unsuccessful, the radio display shows . Turn on your Bluetooth device and place it in pairing mode. Refer to the documentation of your Bluetooth device.
A zone is a group of channels. The 16-key and 4-key radios support up to 2000 channels and 250 zones, with a maximum of 160 channels per zone. The non-keypad radio supports up to 32 channels and two zones, with a maximum of 16 channels per zone. Press the function key programmed for Zone. or Press and select . The selected zone is indicated by a . Scroll to the required zone and press . Press the function key programmed for Zone.
To use the quick channel change method simply dial the channel you would like to use. e.g. - dial 502 to move to channel 502. Turn the channel selector to select the channel with the active group alias or ID. Hold the radio vertically one to two inches (2.5 to 5 cm) from your mouth. Press the PTT key to make the call. The LED lights up solid red and the Group Call icon appears. The first text line shows the group call alias.
Turn the channel selector to select the channel with the active subscriber alias or ID. Hold the radio vertically one to two inches (2.5 to 5 cm) from your mouth. Press the PTT key to make the call. The LED lights up red. The Private Call icon appears. The first text line shows the subscriber alias. The second text line displays the call status. Wait for the Talk Permit tone to finish (if enabled) and speak clearly into the microphone. Release the PTT key to listen.
During scan, the LED flashes orange and the Scan icon is displayed. Press the function key programmed to turn scan on or off. During scan, the LED flashes orange. Press the function key programmed to make a call alert to the predefined ID. or Press and select > . Scroll to required contact and press Select and . or (for 16-key radio only) Press and select > . Enter the subscriber ID you want to page and press . In the select menu .
Press the function key programmed to make a call alert to the predefined contact. The LED flashes when your radio is sending the call alert. If the Call Alert acknowledgement is received, two chirps sound. or If the Call Alert acknowledgement is not received, a low-pitched tone sounds. Press the function key programmed to send a predefined quick text message to a predefined contact. or Press the function key programmed to open the function. Go to step 2 below. or Press and select > .
You can also press the right selectyion key to quit the operation. Press . You can also press in the drafts. Select and then press to save the message , scroll to the required contact . or Select and press end enter the subscriber ID . The display shows flashes red. and the LED If the message is sent, a tone sounds and the display or If the message is not sent, a low tone sounds and the display shows Press the function key programmed to open the Quick Text function. Go to step 2 below.
Press the function key programmed to send a predefined quick text message to a predefined ID. The LED flashes red. Two chirps indicate that the message has been sent, or a low-pitched tone indicates that the message cannot be sent. If your radio is set to silent, it will not display any audio or visual indicators during Emergency mode. Press the function key programmed for emergency. The display shows and the destination alias. The LED blinks red and the Emergency icon appears.
Your radio may be enabled to send location information. Press Select and select > . and select on or off. When GPS is turned on, the GPS icon will appear. Once a GPS signal is available, the GPS icon will change to . Press the function key programmed for GPS to turn GPS on or off. If turned on, a positive tone sounds. If turned off, a negative tone sounds.
This section describes how to charge your Tait radio battery as well as care for it, to ensure safe operation, maximum performance and prolonged battery life.
Unless otherwise indicated, the charging advice and instructions in this document apply to all chargers. The following chargers are available for your Tait radios and batteries: T03-00322-xxxx Desktop charger Check the battery label and charger label to see if the charger is compatible with the battery. See also "About the chargers" on page 54. Handle the battery safely. Failure to observe the following handling recommendations could result in personal injury and/or equipment damage.
Turn the radio off before removing the battery, and turn it on again after attaching the battery. This ensures that the radio powers down and up correctly. Failing to follow this procedure may require the radio to be turned off then on again to operate correctly. Do not expose a battery to very high or very low temperatures for extended periods of time. Doing so will shorten the usable life (‘service life’) of the battery.
You can remove a battery/radio from the charger at any time without harming the battery, the radio, or the charger. When you return the battery/radio to the charger, charging is automatically resumed. For best charging performance, switch off the radio before placing it in the charger. You can receive a call while the radio is in the charger, but your radio performance may be degraded. If you do remove the radio from the charger to answer a call, the call will not be disrupted.
Fully charge a battery before using it for the first time. The red LED stays lit while the battery charges. For best charging performance, switch off the radio before placing it in the charger. Desktop charger: Connect the charger to the correct Tait power adaptor. 6-way charger: Power on the charger. Initially, all three LEDs are lit for 2 seconds. Place just a battery in the charger, or a radio with a battery attached (desktop charger or 6-way charger only).
If there is a battery in the charger when power is supplied to the charger, the LEDs behave as follows: briefly The charger has been connected to a power supply. The battery is charging. steady Charging complete. Remove the battery, or steady leave it in the charger. steady The battery temperature is outside the normal charging range. Charging will start or resume once the temperature is within normal limits. No action is required by you. There is a fault. Contact your dealer.
Lift the battery/radio out of the charger. You can remove a battery/radio from the charger at any time without harming the battery, the radio, or the charger. When you return the battery/radio to the charger, charging is automatically resumed. You can also leave a battery/radio in the charger once charging is complete. With proper care and maintenance you will maintain the performance and life of the battery. It is recommended that you: Use only Tait chargers and batteries.
Remove the battery from the radio before storage. Fully charge the battery if storing for less than one month. Charge batteries to about 30% if storing for longer than one month. Store in a cool dry place. Batteries that have been stored for any length of time must be charged before being used. See "Charging a battery for the first time" on page 57. Run the battery flat before disposing of it. When disposing of the battery, be sure to do so in an environmentally sensitive manner.
This section describes troubleshooting procedures, and basic maintenance.
If you are experiencing difficulty operating your radio, you may find the following sections helpful. Consult your radio provider for assistance, if necessary. If the LED on your radio does not glow red when the radio is turned on, it is probable that power is not reaching the radio.
Your radio requires no regular maintenance other than ensuring that the battery has sufficient charge and that no damage has occurred to the antenna or the battery. To prevent permanent damage to the radio case, do not allow the radio to come into contact with detergents, alcohol, aerosol sprays, or petroleumbased products. For general battery care, see "Maintaining battery life and performance" on page 59. Do not scratch or scrape the contacts of the battery.
This Software License Agreement ("Agreement") is between you (“Licensee”) and Tait International Limited (“Tait"). By using any of the Software items embedded and pre-loaded in the related Tait Designated Product, included on CD, downloaded from the Tait website, or provided in any other form, you agree to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, do not install or use any of the Software.
means any individual, partnership, corporation, association, joint stock company, trust, joint venture, limited liability company, governmental authority, sole proprietorship, or other form of legal entity recognized by a governmental authority.
Licensee and only in accordance with the Documentation. 3.3. If the Software licensed under this Agreement contains or is derived from Open Source Software, the terms and conditions governing the use of such Open Source Software are in the Open Source Software Licenses of the copyright owner and not in this Agreement.
period of two years thereafter, accurate records relating to this license grant to verify compliance with this Agreement. Tait, or a third party nominated by Tait, may inspect Licensee’s premises, books and records, upon reasonable prior notice to Licensee, during Licensee’s normal business hours and subject to Licensee's facility and security regulations.
Documentation other than the express warranties set forth in this Section 6.
8.2. Within thirty (30) days after termination of this Agreement, Licensee must certify in writing to Tait that all copies of the Software have been removed or deleted from the Designated Products and that all copies of the Software and Documentation have been returned to Tait or destroyed by Licensee and are no longer in use by Licensee. 8.3.
11.5. THIRD-PARTY BENEFICIARIES. This Agreement is entered into solely for the benefit of Tait and Licensee. No third party has the right to make any claim or assert any right under this Agreement, and no third party is deemed a beneficiary of this Agreement. Notwithstanding the foregoing, any licensor or supplier of third-party software included in the Software will be a direct and intended third-party beneficiary of this Agreement. 11.6. SURVIVAL. Sections 4, 5, 6.
EN BG ES CS DA EL FR HR IT LV LT ET HU
MT NL PL PT RO SK SL FI SV