User Manual TD-9030A Brand Name: TaiDoc FCC ID: TM79030A01 Version 1.0 2014-07 A1.
Description: The TD-9030A is a low power and low costs Bluetooth 4.0 BLE module based on the 32 bit ARMR Cortex™-M0 CPU .Perfect for communication and cable replacement between your device and a smartphone, computer or other devices. It is easy to setup and use thanks to real and virtual UART interface and AT commands. Key Features 2.
1. Pinout and Terminal Description Figure 1: Pinout Pin Symbol I/O Type Description 1 BAT_Monitor I Battery Voltage Monitor 2 VBAT P Power input 3 VBAT P Power input 4 VCC P Power Output 5 VCC P Power Output 6 VCC P Power Output 7 NC NC Not Connect 8 DEV_STAT O Wakeup Device 9 PIO-0 I/O GPIO 10 PIO-1 I/O GPIO 11 DTM_RTS I UART RTS signal (Note.1) 12 DTM_CTS O UART CTS signal (Note.1) 13 DTM_TX O UART TX signal (Note.
16 GND P GND 17 SWDCLK I JTACK Clock 18 SWDIO I/O JTACK Data 19 DTM_Mode I Set Low to DTM Mode Set High to BLE Mode 20 NC NC Not Connect 21 BLE_RX I UART RX 22 BLE_TX O UART TX 23 BLE_CTS O UART CTS 24 BLE_RTS I UART RTS 25 NC NC Not Connect 26 Paring_Key I Set Low to Paring Device 27 NC NC Not Connect 28 LED O LED indicator 29 GND P GND 30 NC NC Note.1 DTM is Direct Test Mode。 Not Connect 2. Power supply The Module accept 3.1V to 4.
. Dimension A2.
FEDERAL COMMUNICATIONS COMMISION (FCC) STATEMENT 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
根據 NCC 低功率電波輻射性電機管理辦法 規定: 經型式認證合格之低功率射頻電機，非經許可，公司、商號或 第十二條 使用者均不得擅自變更頻率、加大功率或變更原設計之特性及 功能。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經 發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續 第十四條 使用。前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻 射性電機設備之干擾。 A2.
