User's Manual

Important Safety Instructions
Important Safety Instructions
1. Please read the safety precautions carefully before
installing and using the equipment.
2. Please keep this safety instructions for future
reference.
3. Please strictly adhere to the WARNINGs in the user’s
guide.
4. Please follow all the operation instructions in the
user’s guide.
5. Equipment cleaning: Make sure to turn off the power
supply and disconnect the units before cleaning.
Clean only with a dry soft cloth.
6. To prevent from any hazard use only accessories
recommended by the manufacturer.
7. To prevent from any hazard do not expose the
equipment to moisture or humidity.
8. Do not place the equipment on any uneven or
unstable stand; original product package or
appropriate package should be used to avoid damage
caused by strong impacts during transportation.
9. Adequate ventilation is good for the maintenance of
the equipment.
10. Power supply cords:
America, Japan: AC 110V~120V 60Hz
Asia, Europe: AC 220V~240V 50Hz
11. Grounding: 3-wire grounding plug.
12. To maintain the normal operation of the system,
system extension cables should be discreetly routed
to avoid being walked on or pinched by heavy items.
13. The quantity of connected units in one system should
not exceed prescribed quantity. For service, please
contact the nearest TAIDEN Service Center.
14. Do not remove the cover of the equipment at will; no
hard conductor or liquid substance should be left
inside the products.
15. For service, please contact the nearest TAIDEN
Service Center. Do not disassemble the equipment by
non-authorized personnel.
16. All TAIDEN products are guaranteed for 3 years
excluding the following cases: (please delete:
“caused by personal reasons”)
A. Damage or malfunction caused by human
negligence;
B. Damage or malfunction caused by improper
operating by operator;
C. Parts damage or loss caused by disassembling
the product by non-authorized personnel.
17. Use ONLY specified connection cable to connect the
system equipment.
18. Turn off the power supply and unplug the equipment
from the power supply in case the equipment is not in
use for a long time.
19. Upon receipt of the product, please fill out the
Warranty Card enclosed and post it to TAIDEN
Service Center nearby in your region.
CAUTION: To reduce the risk of electric
shock, DO NOT open covers, no useable
serviceable parts inside. Refer servicing
to qualified service personnel only.
This label appears on the rear of the unit due to space limitations
The lightning flash with an arrowhead symbol, with
an equilateral triangle, is intended to alert the user
to the presence of uninsulated ‘dangerous voltage’
within the products enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation mark within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
WARNING: To prevent fire or shock hazard,
DO NOT expose units to rain or moisture.
Attention: Installation should be performed by
qualified service personnel only in accordance with
the National Electrical or applicable local codes.
Power Disconnect: Units with or without ON – OFF
switch have power supplied to the unit whenever
the power cord is inserted into the power source;
however, the unit is operational only when the ON
– OFF switch is in the ON position. The power cord
is the main power disconnect for all units.
I