User's Manual

ManualsBrandsTAIDEN INDUSTRIAL ManualsElectronicsWireless Voting Unit

Safety Precautions

1.Please read the safety precautions carefully before installation

and use of the equipment.

2.Please keep this Safety Precautions for future reference.

3.Please strictly adhere to the WARNINGs in the User Guide.

4.Please follow all the operation instructions in the User Guide.

5.Equipment cleaning Make sure to turn off the power supply

and disconnect the conference units before cleaning. Use a dry

soft cloth to clean the equipment.

6.Do not use any accessory, which is not recommended by the

manufacture to prevent any risk of hazards.

7.Do not expose the equipment to moisture or humidity to

prevent any hazards.

8.Do not place the equipment on any uneven or unstable stand

original product package or appropriate package should be

used to avoid damage caused by strong impacts during

transportation.

9.Adequate ventilation is good for the maintenance of the

equipment.

10.Power supply cords America, Japan AC 110V~120V 60Hz

Asia, Europe AC 220V~240V 50Hz

11.Grounding 3-wire grounding plug.

12. System extension cables should be discreetly routed to avoid

being walked on or pinched by heavy items to maintain the

normal operation of the system.

13.Do not remove the cover of the equipment at will, no hard

conductor or liquid substance is left inside the products.

14.For service, please contact the nearest Taiden Service Center .

Do not disassemble the equipment by unauthorized

personnel.

15.All TAIDEN products are guaranteed for 3 years excluding the

following cases caused by personal reasons :

A. Damage or malfunction caused by human negligence such

as dropping, striking and so on

B. Damage or malfunction caused by improper handling of the

operator

C. Parts damage or loss caused by disassembling the product

by non-authorized Taiden personnel.

16. Use ONLY specified connection cable to connect the system

equipment.

17.Turn off the power supply and unplug the equipment from the

power supply in case the equipment is not in use for a long

time.

18.Upon receipt of the product, please fill out the Warranty Card

enclosed and post it to Taiden Service Center nearby in your

region.

This User Guider is applicable to the following products

HCS-4100MTB

HCS-4390A

HCS-4390AK

HCS-4395A

HCS-4395AK

HCS-4391

Wireless Voting Main Unit

Wireless Voting Unit

(3 voting keys, English faceplate)

Wireless Voting Unit

(3 voting keys, IC-Card

Wireless Voting Unit

(3 voting keys, )

Wireless Voting Unit

(3 voting keys, IC-Card, )

Wireless Voting RF Transceiver

, English faceplate)

English faceplate

CAUTION: To reduce the risk of electric

shock , DO NOT open covers,

serviceable parts inside. Refer servicing to

qualified service personnel only

no useable

This label may appear on the bottom of the unit due to space

limitations.

The lightning flash with an arrowhead symbol,

an equilateral triangle

voltage within the products

of sufficient magnitude

shock to persons.

with , is intended to alert the

user to the presence of uninsulated dangerous

enclosure that may be

to constitute a risk of

electric

The exclamation mark within an equilateral

is intended to alert the user to the

important operating and

instructions in the

appliance.

triangle

presence of maintenance

(servicing) literature

accompanying the

WARNING:To prevent fire or shock hazard,

expose units to rain or moisturedo not

Attention: Installation should be performed by

service personnel only in accordance

Electrical or applicable local

qualified

with the National

codes.

Power Disconnect: Units with or without ON -

switches have power supplied to the unit

power cord is inserted into the

the unit is operational

in the ON

OFF

whenever the

power source; however,

only when the ON - OFF switch

is position. The power cord is the main

power disconnect for all units.

Summary of content (7 pages)

PAGE 1
Safety Precautions Safety Precautions 1.Please read the safety precautions carefully before installation and use of the equipment. 2.Please keep this Safety Precautions for future reference. 3.Please strictly adhere to the WARNINGs in the User Guide. 4.Please follow all the operation instructions in the User Guide. 5.Equipment cleaning Make sure to turn off the power supply and disconnect the conference units before cleaning. Use a dry soft cloth to clean the equipment. 6.
PAGE 2
HCS-4100MT Series Wireless Voting System Operation Instructions HCS - 4100MTB Wireless Voting Main Unit HCS-4100MTB is the control main unit of the fully digital wireless voting system, each main unit can control as many as 32 RF transceivers HCS-4391. The system can be expanded to support up to 10000 wireless voting units. HCS-4391 RF transceiver communicates with wireless voting unit HCS-4390/4395 for wireless data transmission within the radiation coverage.
PAGE 3
The specified HCS-4390/4395 to move throughout the conference venue. Operator A should examine the number of “failure number” on the PC, if the number of “failure” in a certain area keeps increasing ,it means this is probably a signal blind area or there exists interference , an extra HCS - 4391 should b e added to enlarge the radiation coverage.
PAGE 4
operating time is about 60 hours, in recess state (standby state) the batteries last about 120 hours, No power consumes when it is turned off. Auto frequency point selecting: auto search for the available frequency points when the unit is turned on; If no frequency points are available, the unit will turn itself off automatically. In case no signals are available, the unit will turn to standby mode and then automatically turn itself off.
PAGE 5
PAGE 6
PAGE 7
FCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.