Power Node Radio Module User's Guide Revision 1.
Power Node Radio Module User's Guide Publishing Information Disclaimer and Limitation of Liability All information herein is either public information or is the property of and owned solely by TAGSYS who shall have and keep the sole right to file patent applications or any other kind of intellectual property protection in connection with such information.
Power Node Radio Module User’s Guide Read This First Welcome to the TAGSYS RFID System. This User's Guide is designed to help you get up and running quickly using this high-quality Radio Frequency Identification (RFID) system. It describes all you need to know about how to install and use the TAGSYS system and its associated applications. This guide is designed for all CIT (Certified Integrators by TAGSYS) and for TAGSYS Expert Network customers implementing a low-cost and high-performance RFID solution.
Power Node Radio Module User's Guide Quality Issues TAGSYS implements stringent quality controls at all stages of its manufacturing process. However, should you find a defect with this product, please notify your TAGSYS Quality Service representative using the dedicated Product Return Form. 4/17 Telephone: +33 (0)4 42 18 89 00 E-Mail: rma@tagsysrfid.com Revision 1.
Power Node Radio ModuleUser's Guide Table of Contents PUBLISHING INFORMATION __________________________________________________________ 2 DISCLAIMER AND LIMITATION OF LIABILITY __________________________________________________ 2 READ THIS FIRST ____________________________________________________________________ 3 CONVENTIONS _________________________________________________________________________ 3 IF YOU NEED ASSISTANCE ________________________________________________________________ 3 CONTACT FOR COMM
Power Node Radio Module User's Guide 1 For Your Safety 1.1 General Use The HOT SPOT RADIO MODULE is designed to be reliable and to provide years of trouble-free service. Please observe the following general tips: Take care not to scratch the device. Keep the device clean. When working with the device, use only TAGSYS-approved accessories. This device is not waterproof and should not be exposed to rain or moisture. Under extreme conditions, water may enter the circuitry.
Power Node Radio ModuleUser's Guide 1.3 Important Safety Information 1.3.1 Operating Environment When connecting the device or any accessory to another device, read its user guide for detailed safety instructions. Do not connect incompatible products. As with all RF equipment, users are advised that the equipment should only be used in its normal operating position.
Power Node Radio Module User's Guide 2 Certification 2.1 Regulatory Notices An RFID system typically composed of an RF emission device such as the POWER NODE RADIO MODULE connected to an antenna is subject to national regulations that may differ by country. If the Power Node radio module is further integrated in a different product, it is the responsibility of the manufacturer of this complementary product to obtain the required approvals for this product.
Power Node Radio ModuleUser's Guide 2.
Power Node Radio Module User's Guide 3 Power Node radio description The Power Node radio is intended to be included in a Power Node equipment, which is part of a “Hot Spot Power Node” system. The “Hot Spot Power Node” system is designed to emphasize the range of a RFID reader addressing passive tags. The system uses UHF frequency band, following the FCC 15.247 standard (including frequency hopping feature), and ISO 18000-6c protocol.
Power Node Radio ModuleUser's Guide 4 Power Node Radio Interface 4.1 Overview of the Radio module The Power node radio modules has two coaxial connections, one for the Hot Spot receive RFID signal, one for the transmit RFID signal. The three connectors are U.FL type, female, board receptacles. The Power node radio is also connected to a Power Node mother-board that pilots it and provides the supply. The piloting is done through an asynchronous link (RS232 like) with a Tx and a Rx connections.
Power Node Radio Module User's Guide 4.2 How to connect Antenna In order to comply with FCC regulations and insure optimum performance, the Power node radio module must be integrated using the following recommended antennas. Furthermore a minimum distance of 20cm should be kept between antennas and between general public for human exposure limitation.
Power Node Radio ModuleUser's Guide 4.2.2 Transmit (Tx) RFID Antenna Up to four antennas can be connected to front panel SMA antennas. Refer to Figure 2 for a picture of such an antenna.
Power Node Radio Module User's Guide Figure 3 : Example of Product labelling including the Power Node Radio Module 14/17 Revision 1.
Power Node Radio ModuleUser's Guide 5 Warranty Conditions 5.1 Warranty TAGSYS warrants that this Product shall comply with the functional specifications set forth herein for a period of one year from the date of delivery to the Buyer.
Power Node Radio Module User's Guide Any use or incorporation by the Buyer or a third party of TAGSYS' Product into lifesaving or life support devices or systems, or any related products; TAGSYS expressly excludes any liability for such use. 5.2.1 General Provisions This warranty sets forth the full extent of TAGSYS responsibility regarding the Product.
Power Node Radio ModuleUser's Guide Product Return Form Customer Profile: RMA Number : ........................................ Company:................................................................. Address: ................................................................... City & State: ............................................................. Zip Code: ................................................................. Country: ...................................................................
