Installation Guide

The rain chain allows water running through a gutter or off a roof to
create a visual and auditory attraction. Rain flows from the top to
bottom creating a vertical stream. Powder-coated finishes stand up to
wind, rain and cold.*
*A protective coating has been applied, however, the product may naturally weather over time
Parts Included
A. 8 Flower Shape Cups
B. Rain Basin (attached)
C. 1 Gutter clip
D. Instruction Sheet
*total product length 102”
WARNING: collected water is not for drinking.
Blossom Rain Chain Instructions
Installing Your Rain Chain
(Tools may be Required – Not Included)
1. First, remove the downspout on your rain gutter.
2. Insert gutter clip into gutter’s downspout hole from the top side of the
gutter. Gutter clip will look like an upside down triangle. Installation may
require some slight bending of the gutter clip so it sits flat against the
gutter. Gutter clip will bend easily by hand for easy adjustment.
3. Hook the rain chain to the gutter clip using attached rain chain hook.
4. To shorten, pull the hook and chain through the gutter clip and
attach the hook to desired rain chain loop.
OPTIONAL: arrange rocks, pebbles or stones below the basin to help
distribute run-off and stabilize the chain. The chain is more secure when
basin is full.
Gutter
Gutter clip
Rain chain