User's Manual

ManualsBrandsTAG-N-TRAC ManualsElectronicsSmart Sense Tag

Table Of Contents

Tag-N-Trac SmartSense Tag User Manual 20220923.pdf

Tag-N-Trac 4250 Executive Sq, Suite 675, La Jolla, CA 92037 www.tagntrac.com +1-858-365-5888

About This User Manual

This user manual explains how to use Tag-N-Trac’s SmartSense Tag. This product is also

referred to as a – cellular puck or cellular tracker. The intended audience is users who will be

receiving samples of the SmartSense tag for test, evaluation, or deployment.

SmartSense tag is currently in production.

What is included in the box?

SmartSense Tag is shipped with a charging cable.

Image 1. SmartSense Tag with charging cable.

USER MANUAL

SmartSense Tag

TAG-N-TRAC SMARTSENSE TAG

Summary of content (6 pages)

PAGE 1
USER MANUAL SmartSense Tag TAG-N-TRAC SMARTSENSE TAG About This User Manual This user manual explains how to use Tag-N-Trac’s SmartSense Tag. This product is also referred to as a – cellular puck or cellular tracker. The intended audience is users who will be receiving samples of the SmartSense tag for test, evaluation, or deployment. SmartSense tag is currently in production. What is included in the box? SmartSense Tag is shipped with a charging cable. Image 1. SmartSense Tag with charging cable.
PAGE 2
Front and back of the SmartSense Tag: Image 2. Front and Back of the SmartSense Tag. How to charge the Tag: The charging cable has a magnetic connector. Please connect the cable to the device as shown in the image below. Below images illustrate how to charge the SmartSense Tag with its charging cable. The charging cable has a magnetic connector with two pins that is used to charge the Tag. Image 3. SmartSense Tag – charging cable and charging port.
PAGE 3
Image 4. SmartSense Tag – charging cable plugged into the charging port. MicroUSB port: MicroUSB port is not a charging port. It is available to connect any supported sensors for e.g., high precision temperature sensor with probes. LED status indicators: GREEN Charging state – with charger plugged in. ON Device is being charged. OFF RED State of the device Blinking Device is awake trying to get a fix or upload the data to the cloud. Device is fully charged OFF Device is in sleep state. Table 1.
PAGE 4
Tag-N-Trac customer dashboard – Understanding data uploaded by the SmartSense Tag: Data captured by the SmartSense Tag is uploaded to Tag-N-Trac’s cloud at a pre-defined interval. This data and related analytics can be visualized on Tag-N-Trac’s customer dashboard. Image 5. Tag-N-Trac Customer Dashboard More details regarding the Dashboard can be found in TNT’s Cloud User Manual. Tag-N-Trac 4250 Executive Sq, Suite 675, La Jolla, CA92037 www.tagntrac.
PAGE 5
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 6
CE Maintenance 1. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 2. EUT Operating temperature range: -20° C to 55° C . 3. The device complies with RF specifications when the device used at 5mm from your body. Declaration of Conformity Chongqing Huiye IoT Technology Co.,Ltd. hereby declares that this Smart Sense Tag is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.