User's Manual Part 5

ManualsBrandst+ Medical ManualsElectronicsBluetoothÂ® Cradle

www.thinkdiabetes.co.uk

General Information

Systems including the cradle should be used in conjunction with the care provided

by healthcare professionals

Description

Enables the data (Blood Glucose readings)

stored on the OneTouch Ultra to be

downloaded over Bluetooth.

Any device which allows access to the

Bluetooth Serial Port and for which an

interface is available. Details from e-San Ltd.

Bluetooth

1.5 m

0 dBm

3V cell: CR 2032

0 to +50C

-10 to +60C

29 grams

Horseshoe shape contained by 85 mm length x

64.5 mm width x 25 mm height

People with diabetes

Mounted directly on the blood glucose (BG)

monitor

Yes

Characteristic or Parameter

System description

Devices the cradle can be

used with

Transmission

Operation range

Output Power

Power Supply

Temperature Ranges

Operating

Storage

Transportation

Weight

Dimensions

Intended Users

Site of Use

CE marked after appropriate

testing

Bluetooth tested and

approved

www.thinkdiabetes.co.uk

General Information and Maintenance

Battery Advice

The cradle battery should last about 6 months, up to 4 readings per day.

The battery for the cradle and OneTouch meter are the same type

Keep away from small children

Do not short circuit, recharge or dispose of in fire

Store in a cool, dry place before use

Maintenance and Calibration

Ther

e ar

e no user ser

viceable parts and the cradle does not require calibration, please

refer to the One Touch Ultra manual for maintenance advice for the meter.

Faulty or Damaged Cradle

Should the cradle be damaged please contact the t+ diabetes customer suppor

t line on

0844 8000 167 for further advice.

Removing the battery from the cradle

1 Slide off the battery tray on the rear of the cradle and

remove the battery.

You do not need to remove the OneTouch meter from the

cradle to change the battery in either device.

Inserting a New Battery

1) place a 3V lithium battery (type CR2032) on the battery

tray. Ensure the top of the battery (with writing on) is

facing upwards.

Slide the tray into the back of the cradle. Ensur

e that

the tray points are placed into the runners on the back

of the meter.

3) Press the tray into the back of the cradle until it clicks

into place and is flush with the back of the cradle..

Summary of content (2 pages)

PAGE 1
General Information and Maintenance General Information Removing the battery from the cradle Characteristic or Parameter Description 1 Slide off the battery tray on the rear of the cradle and remove the battery. System description Enables the data (Blood Glucose readings) stored on the OneTouch Ultra to be downloaded over Bluetooth. Devices the cradle can be used with Any device which allows access to the Bluetooth Serial Port and for which an interface is available. Details from e-San Ltd.
PAGE 2
Quick reference guide to taking a reading Notes This guide is intended for normal day to day usage of your t+ diabetes system, for use once your phone has been provisioned. See Getting started Pages 6-13. 1. Ensure your One Touch meter is firmly fitted in your cradle. (You can and should leave your One Touch meter in your cradle all the time). 2. Take your blood glucose reading as normal and then take the strip out of the One Touch meter. 3. On your mobile phone open t+, and select TAKE A TEST.