Smart Tilt Mini Projector M200A
Contents Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warning! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 FCC Information . . .
Caution • TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. THERE ARE NO SERVICEABLE PARTS INSIDE • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
Danger To reduce the risk of electric shock, burns, fire or injury: 1. Do not use while bathing or in a shower. 2. Do not place or store unit where it can fall or be pulled into a tub or sink. 3. Do not place in, drop or submerge in water or other liquid. 4. Do not reach for unit that has fallen into water. Unplug it immediately. 5. Care should be taken so that objects do not fall and liquids are not spilled onto the unit. Warning 1. 2. 3. 4. 5. 6.
7. 8. 9. 10. 11. 12. 13. 14. 4 The unit should be situated away from direct sunlight or heat sources such as radiators, electric heaters, heat registers, stoves, or other units (including amplifiers) that produce heat. Avoid placing on top of stereo equipment that radiates heat. Never block the air openings of the unit with materials such as clothing, plastic bags or papers, or place it on a soft surface such as a bed or couch, where the air openings may be blocked.
Warning! This product contains a rechargeable battery • Do not store this product in high temperatures, damp areas, or in direct sunlight. • Never disassemble the product. • Never dispose of the product in fire or water, which may result in explosion and/or injury. • Keep product out of reach of children. • Do not touch product with damp hands. • Dispose of the product properly. • The product must not be discarded with ordinary household waste. • Contact your local recycling center for proper disposal.
FCC Information This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
PARTS AND CONTROLS 1. Lens 2. Focus wheel 3. Device status light 4. Power button 2 10 5. 3.5mm audio out 11 6. HDMI Input AUDIO 3 4 5 7. Reset button HDMI 6 8. Power indicator light 9. DC input 1 7 8 9 10. Volume down button DC IN 11.
Specifications Product Dimensions Brightness Lamp Life Image Size Throw Ratio Contrast Ratio Native Resolution Aspect Ratio Built-in Speaker Power Auto Keystone Battery 5.4˝ x 3.2˝ x 0.9˝ Up to 200 Lumens* LED lamp with up to 20,000 hours Up to 80˝ 1.
Charging the Battery The built-in battery is charged using the included USB 2.0 Type C cable. The power indicator light on the projector will illuminate red to indicate the battery is charging. Once fully charged, the power indicator light will turn green. When powered on, the projector will also display the charging icon on the home screen status bar when plugged into power. The USB 2.
Operating the Remote Control Controls and Buttons A. B. C. D. E. F. G. H. I. J. K. L.
Operating the Projector Setup 1. Install included (2) AAA batteries in the remote control. • Turn the remote control over and locate the battery door on the rear of the unit. • Press on the remote door arrow and slide in the direction indicated by the arrow. • Insert batteries as pictured on the inside of the battery compartment. Important: Insert batteries negative (-) side first into the slots , pushing it into the coil and then into the compartment. Do not insert batteries positive (+) side first.
projector’s DC in port and the power adapter into an outlet. Once connected, the power indicator light will illuminate on the projector. • To power the projector with the built-in battery, simply turn the projector on. • To power the projector with a battery bank or computer, connect the USB 2.0 Type C charging cable to the projector’s DC port and the other end to the USB power source. Important: Fully charge the battery before first use (approx. 4-5 hours). 3.
6. Press the “Home” button on the remote to return to the projector’s home screen. The wireless icon will be displayed in the projector’s home screen status bar if the connection setup was successful. The number of blue shaded bars on the icon depicts the strength of the wireless signal.
IMPORTANT: Some apps require payment or a subscription to access content. App availability can change. Streaming speeds will vary based on your internet connection. 1. Connect the projector to a wireless network (see the “Connecting the Projector to a Wireless Network” on page 13 of this manual). Downloading apps 2. Select the App Center icon from the projector’s home screen. 3. Select the desired app. 4. Select install and follow the app on screen prompts as needed. 5.
HDMI Connection The projector can be connected to a variety of devices such as smart phones, tablets, laptops, media streamers, and digital cameras via HDMI. Important: Devices that do not have an HDMI port will require an adapter to connect or may need to be connected wirelessly. To determine what type of adapter you need to use, please reference the “What do I need to connect?” on page 17 section in this manual or visit our website miroirusa.com/support. 1.
What do I need to connect? Source Device Needed to Connect Apple iPad®, iPhone® and iPod touch® devices Apple® digital AV adapter (not included) and HDMI cable (included) SlimPort® to HDMI adapter (not included) and HDMI Android™ devices with SlimPort® cable (included) ® Android devices with MHL MHL® to HDMI adapter (not included) and HDMI cable (included) Other Android devices Wireless HDMI adapter (not included), such as a Chromecast™ HDMI cable (included) Laptop or gaming console with HDMI port, Apple TV
Wireless Connection The projector can be connected to some smart phones and tablets via a wireless connection. Android Devices Important: Android devices require Android OS 4.4 or later and the wireless screen mirroring capability to connect wirelessly with the projector. 1. Press the “Input” button on the remote. 2. Select “Screen Mirroring“ on the pop up menu. The projector will display a connecting screen. 3.
1. Connect the projector to a wireless network (see the “Connecting the Projector to a Wireless Network” on page 13 of this manual). 2. On the iOS device download and install the Miroir Wireless App. 3. Once installed, launch the Miroir Wireless App. 4. While on the projector’s home screen, press the “Input” button on the remote. 5. Select DLNA on the pop up menu. The projector will automatically connect to the iOS device.
Image Adjustments Adjusting image Elevation Place the projector on a hard flat surface. Stabilize the battery side of the projector with one hand and gently lift the lens side of the projector with your other hand. Adjusting image Focus Simply roll the focus wheel control upwards and downwards to fine-tune the image.
adjusting the volume The volume level of the projector can be adjusted using the volume controls on the projector, or the volume controls on the included remote control. Press the “Vvolume up” button or the “Volume down” button to adjust to the preferred volume level. Connecting an External Speaker External speakers can be connected to the projector through the 3.5mm audio port on the projector or wirelessly with a Bluetooth speaker. To connect an external Bluetooth speaker: 1.
ECO Power Mode ECO power mode will decrease the projector’s brightness to maximize the projector’s battery life. Turn ECO power mode on or off by pressing the ECO power mode button on the remote. Vivid Mode Vivid mode enhances image contrast and brightness, ideal for movie watching. Turn vivid mode on or off: 1. Select the 2. Scroll down to the vivid mode option in the settings menu. settings icon from the projector’s home screen. 3. Select on or off.
Cleaning the Lens An optical lens cleaning solution can be used to clean the projector’s optical lens. Apply a small amount of the cleaning solution to a clean soft cleaning cloth and gently wipe the lens in a circular motion. Important: Do not apply cleaning solution directly to the lens. Do not use abrasive cleaners, solvents or cleaning cloths. Do not apply the cleaning solution to the projector’s case.
Troubleshooting The projected image is blurry. • Adjust the focus wheel on the projector to fine-tune the picture. • Check that the surface you are projecting on is smooth. • Check that the projector’s lens is free of dust and debris. The projected image is too small. • Move the projector farther away from the projection surface. The projected image is smaller on one side and larger on the other. • Adjust the projector so the lens is facing your projection surface at a 90° angle.
The projector is not connecting to your wireless network. • Check that you have selected the correct wireless router name in the setup menu. • Check that you are inputting the correct password if your network is security enabled (passwords are case sensitive). • Check that there are no obstructions, like cement walls, between the projector and your wireless router. • Try relocating the projector to minimize wireless interference from other household appliances and/or other wireless networks.
The projector’s remote control isn’t functioning. • If the status light on the remote flashes each time your press a button on the remote, the problem is not with your remote. • Try moving closer to the projector with the remote. • Check that the batteries are functioning and inserted properly. The projector is not projecting. • Check that there are no obstructions between the projector and the projection surface. • Check the battery charge on the projector.
-- If connected to a laptop or computer, check your display settings to ensure a multiple display option is selected. -- If connected to a gaming console, power down the console and the projector. Check that the HDMI cable is securely connected to the HDMI port on the projector and to the HDMI port on the gaming console. Power the projector on, then power on the gaming console.
One (1) Year Limited Warranty Miroir (“Miroir”) warrants to you, the original retail purchaser (“Consumer”), that this product (“Product”) will under normal use operate substantially in accordance with the accompanying documentation for a period of one (1) year from date of original purchase.
KIND, WHETHER EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR USE OR PURPOSE, NON-INFRINGEMENT, QUALITY AND TITLE. MIROIR DOES NOT WARRANT THAT THE PRODUCT IS ERROR FREE OR THAT IT WILL FUNCTION WITHOUT INTERRUPTION.
Miroir assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice. © 2016 Miroir USA. All rights reserved. Miroir is a registered trademark of Miroir USA in the US and other countries. All other trademarks are the property of their respective owners.
