HD Mini Projector MP150W
Contents Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warning! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 FCC Information . . . . . . . . . . . . . . . . . . . . . . . . .
Caution • TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. THERE ARE NO SERVICEABLE PARTS INSIDE • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
Danger To 1. 2. 3. 4. 5. reduce the risk of electric shock, burns, fire or injury: Do not use while bathing or in a shower. Do not place or store unit where it can fall or be pulled into a tub or sink. Do not place in, drop or submerge in water or other liquid. Do not reach for unit that has fallen into water. Unplug it immediately. Care should be taken so that objects do not fall and liquids are not spilled onto the unit. Warning 1.
7. The unit should be situated away from direct sunlight or heat sources such as radiators, electric heaters, heat registers, stoves, or other units (including amplifiers) that produce heat. Avoid placing on top of stereo equipment that radiates heat. 8. Never block the air openings of the unit with materials such as clothing, plastic bags or papers, or place it on a soft surface such as a bed or couch, where the air openings may be blocked. 9. Do not overload electrical outlet.
Warning! This product contains a rechargeable battery • Do not store this product in high temperatures, damp areas, or in direct sunlight. • Never disassemble the product. • Never dispose of the product in fire or water, which may result in explosion and/or injury. • Keep product out of reach of children. • Do not touch product with damp hands. • Dispose of the product properly. • The product must not be discarded with ordinary household waste. • Contact your local recycling center for proper disposal.
FCC Information This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.
Location of Parts and Controls 1. Battery indicator lights 2. Focus wheel 3. Volume up control 4. Volume down control 5. Power button 6. 3.5mm Audio out 7. USB out (5V/1A) 8. Mode control 9. HDMI Input 10. DC input (12V/2A) 11.
4 5 6 8 9 7 Location of Parts and Controls 10 11 12. Ambient light sensor 13. Lens 14.
Specifications Product Dimensions Brightness Lamp Life Image Size Distance Throw Ratio Contrast Ratio Native Resolution Aspect Ratio Built-in Speaker Power Auto Keystone Battery 3.3” x 5.3” x 1” Up to 200 Lumens* LED lamp with up to 20,000 hours Up to 100” 2ft to 10ft 1.
Projector Compatibility Included in the box Purchase separately Cables and Adapters Included In the Box AC Adapter HDMI® to HDMI Cable Micro HDMI Adapter 11
Apple® Devices Device Wireless Connection iPhone 6 iPhone 6 Plus iPhone 5s iPhone 5c iPhone 5 iPod touch® 5th Gen iPad Air iPad® Mini iPad 4 Wired Connection ® iPhone 4s iPad 3 iPad 2 Miroir Projector App required* Lightning™ Digital AV Adapter HDMI Compatible Cable Miroir Projector App required* 30-Pin Digital AV Adapter HDMI Compatible Cable *NOTE: iOS 7 or later required. See the App store for more information.
Device Wireless Connection Wired Connection MacBook Pro® with Retina display Mac Mini Mac Pro Not available HDMI Compatible Cable MacBook Air® MackBook Pro iMac® Not available Mini DisplayPort to HDMI Adapter HDMI Compatible Cable Apple TV Not available HDMI Compatible Cable Other Devices GoPro® Not available Micro HDMI Adapter HDMI Compatible Cable 13
Android™ Devices Device Wireless Connection Samsung Galaxy S® 6 Requires Android OS 4.4 or later and wireless screen mirroring capability Not Available - device does not support video out Samsung Galaxy Note® 4 Samsung Galaxy Note® 3 Samsung Galaxy S 5 Samsung Galaxy S 4 Requires Android OS 4.
Streaming Devices Device Wireless Connection Wired Connection Roku Apple TV® Amazon Fire TV U-verse® Not available HDMI Compatible Cable Roku® Streaming Stick® Not available Plugs directly into the HDMI compatible port on the projector Google Chromecast Amazon Fire TV Stick Not available Plugs directly into the HDMI compatible port on the projector* ® *NOTE: Both the Chromecast and the Amazon Fire TV Stick require a power source.
Charging the Battery 1. The built-in battery is charged using the included AC adapter. Important: Fully charge the battery before first use (approx. 4-5 hours). 2. The battery has 4 battery charge indicator lights. The lights will flash in turn as the device charges. The battery is fully charged when all 4 lights are lit and no longer flash. 3. Check the battery life by briefing pushing the power button.
Operating the Projector Setup The projector can be powered using the included AC adapter or the built-in battery. • To power the projector with AC power, connect the AC adapter to the projector’s DC input and plug the other end into an outlet. Once connected, the battery indicator lights will illuminate on the projector showing the amount of battery power remaining. • To power the projector with the built-in battery, simply turn the projector on.
Connect a Source Device The projector can be connected to a variety of HDMI compatible devices via a wired connection and to some smartphones and tablets via a wireless connection. Important: Before you power on the projector, please be sure to check that there is nothing blocking the ambient light sensor on the front of the projector (the location of this sensor can be seen in Locations and Parts diagram on page 8).
Note: After syncing with the projector, you may see your device’s screen being mirrored by the projector. Some devices may not have this ability, but they can still be used with the projector to project videos, and photo slide shows. 4. Choose the media you would like to view from the menu on your device and play as you normally would. Wireless Connection 1. To connect wirelessly, power the projector on by pressing and holding the power button for 3 seconds. 2.
c. Select the Miroir projector from the device list. d. Choose the media you would like to view from the menu on your device and play as you normally would. iOS Devices a. For Apple devices, download the Miroir Projector App from the App store. b. On the projector, keep pressing the mode button until you see the iOS Wireless screen displayed. c. Go to Settings on your iOS device and select Wi-Fi. d. Select the Miroir projector from the list of devices.
Adjusting the Volume Touch the mode control area to activate the volume controls. Use the volume up and volume down control areas to adjust to the preferred volume level. Image Adjustments Adjusting the Focus Simply roll the focus wheel control forwards and backwards to fine-tune the image. Adjusting the Vertical Keystone The projector will automatically adjust the display screen to the best condition (+/- 40 degrees automatic vertical keystone correction).
Charging with the Projector The projector has one USB out jack which can be utilized to charge a variety of smart phones. • Connect your device to the fully-charged projector with a USB cable (not included). • Your device’s screen will let you know your device is charging and when it’s fully charged.
Troubleshooting QQ. AA. The projected image is blurry. Adjust the focus wheel on the projector to fine-tune the picture. Also check that the surface you are projecting on is smooth. QQ. AA. The projected image is too small. Move the projector farther away from the projection surface. QQ. AA. The projector is not projecting. Here are several things to check if your projector is not projecting: -- If on battery power, check the battery life remaining by pressing the power button.
One (1) Year Limited Warranty Miroir (“Miroir”) warrants to you, the original retail purchaser (“Consumer”), that this product (“Product”) will under normal use operate substantially in accordance with the accompanying documentation for a period of one (1) year from date of original purchase.
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR USE OR PURPOSE, NONINFRINGEMENT, QUALITY AND TITLE. MIROIR DOES NOT WARRANT THAT THE PRODUCT IS ERROR FREE OR THAT IT WILL FUNCTION WITHOUT INTERRUPTION. To the extent Miroir may not, as a matter of applicable law, disclaim certain implied warranties, the duration of any such implied warranty shall be limited to the shorter of the one (1) year limited warranty period or the minimum time period permitted under such law.
Miroir assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice. © 2015 Miroir USA. All rights reserved. Miroir is a registered trademark of Miroir USA in the US and other countries. All other trademarks are the property of their respective owners.