User's Manual

Table Of Contents

Remote Controller Manual

Arm key

Disarm key

Stay arm

SOS

Arm (Away Arm)

Stay arm

If you press Arm key , the alarm host

would make a “System Arm” sound

with arm indicator on, and all the

defense zones would enter into Arm

status;

If you press Stay arm key , the alarm

host would make a “System Arm” sound

with Stay arm indicator on.

Disarm

SOS

If you press SOS emergency key , the

system would enter into Alarm status

despite whatever status the system would

be in before.

If you press Disarm key , the alarm host

would make a “System Disarm” sound with

Disarm indicator on, and the system would

enter into Disarm status;

Technical Parameter:

1. Working voltage: DC3.V (button battery)

2. Working current: ≤15mA;

3. Working frequency: 433.92 MHZ

4. working temperature: -10 C~+50 C

5. Frequency deviation: ±0.2MHZ

6. Transmitting power: ≥10mW

7. Key description: Home 4 keys

(Disarm, Arm, Stay arm and SOS)

8. Transmitting distance:≥80m（in open air）

9. Coding mode: 1527

Static current: ≤10uA

PAGE 1
Disarm Remote Controller Manual Arm key Disarm key Stay arm SOS If you press Disarm key , the alarm host would make a “System Disarm” sound with Disarm indicator on, and the system would enter into Disarm status; SOS Arm (Away Arm) If you press Arm key , the alarm host would make a “System Arm” sound with arm indicator on, and all the defense zones would enter into Arm status; Stay arm If you press Stay arm key , the alarm host would make a “System Arm” sound with Stay arm indicator on.
PAGE 2
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.